05-21-2019, 06:34 AM | #169 | |
RIP Betsy ( Vitara )
|
Quote:
Need to cut out hole for hood latch I just traced it on cardboard cut it out measured from centre and retraced then dremelled out the hole.
__________________
First retrofitted 2014 mylink. |
|
05-21-2019, 11:33 AM | #170 |
Account Suspended
Drives: 2019 SS 2019 mustang GT Join Date: Apr 2017
Location: California
Posts: 1,694
|
Agreed it's pretty straightforward you don't even need to use the three bolts in corner mounting the bumper to the fender. could damage the bumper.if you do use really small ones ..honestly the hardest part with snapping the grills into the new bumper. they're a pain in the ass.
|
05-21-2019, 03:13 PM | #171 |
Drives: 2014 Camaro LS Join Date: Sep 2018
Location: Indianapolis
Posts: 41
|
I'm assuming you both painted the bumper impact bar black since mine is the color of my car. Was there any other prep needed?
|
05-21-2019, 05:50 PM | #172 |
RIP Betsy ( Vitara )
|
My bumper/car is at painters but I do plan on painting bumper bar black. I may add mesh too behind the open holes. Also going to get it wrapped in xpel after 2 weeks cure time. My anticipation is killing me knoeing I'm close to seeing this happen.
Not looking forward to snapping the grills in. We attempted on test fitting but gave up.
__________________
First retrofitted 2014 mylink. |
05-22-2019, 04:32 PM | #173 |
Drives: 2010 Orange 2SS/RS Join Date: May 2010
Location: West Palm Beach, fl
Posts: 376
|
If I have a 2SS/RS and get this bumper, what headlights can I use with it? Can I use the 6th Gen lights or since I have the RS the harness won't match?
|
05-22-2019, 04:46 PM | #174 | |
Drives: Camaro 2011 RS Join Date: Jun 2015
Location: Anaheim
Posts: 231
|
Quote:
__________________
Sometimes Rattlecan rims look good...
|
|
05-22-2019, 06:54 PM | #175 | |
RIP Betsy ( Vitara )
|
Quote:
Also anyone pre 2014 install the 2014 sized 6th gen headlights ? I might need to.order harnesses for them.
__________________
First retrofitted 2014 mylink. |
|
05-31-2019, 12:27 AM | #176 |
Drives: Camaro 2011 RS Join Date: Jun 2015
Location: Anaheim
Posts: 231
|
anyone ever find a bellypan that would work with this bumper? Would the bellypan work from a zl1?
__________________
Sometimes Rattlecan rims look good...
|
05-31-2019, 02:20 AM | #177 |
RIP Betsy ( Vitara )
|
Im not at installation yet and my car got hit in a parking lot hit and run.
I feel the one I linked here will work but not without cutting. I seen my bumper painted but hard to get excited when my fender looks like this.
__________________
First retrofitted 2014 mylink. |
05-31-2019, 07:12 AM | #178 |
Account Suspended
Drives: 2019 SS 2019 mustang GT Join Date: Apr 2017
Location: California
Posts: 1,694
|
|
05-31-2019, 12:34 PM | #179 |
RIP Betsy ( Vitara )
|
Stay tuned....
Down but not out and just further delays
__________________
First retrofitted 2014 mylink. |
05-31-2019, 08:06 PM | #180 |
Drives: 2013 Camaro 2SS Join Date: Apr 2016
Location: Florida
Posts: 86
|
I've had the bumper for some weeks now, came painted but with some imperfections. Not too bad so I'm still trying to get everything together. I painted the grills myself, but I've been trying to but the grills on the past two days and its extremely hard. Got the lights and everything, I might need a 13-14 harness from what I heard, but I'm stuck on the grills fml. I also bought the zl1 belly pan since mine didn't come with it just incase.
|
06-01-2019, 08:49 AM | #181 | |
RIP Betsy ( Vitara )
|
Quote:
__________________
First retrofitted 2014 mylink. |
|
06-01-2019, 01:27 PM | #182 | |
Account Suspended
Drives: 2019 SS 2019 mustang GT Join Date: Apr 2017
Location: California
Posts: 1,694
|
Quote:
|
|
|
|
|
|