Iowa Members Get In Here!

[rberns]

Originally Posted by Kmorpheus

You better just send that CAI to RPI to get it to match your engine cover, even thou you want to put it on and play this weekend.

I originally wanted to do this too like James did. Put I am a little hesitant because I don't want it to get scratched. Plus, I am not sure I am going to give RPI my business again. Takes way to long to get the job done and communications with them is horrible.

[BenningJ]

Just a side note here, I think this whole post/edit/delete issue would be resolved if the website was bidirectionally associative, meaning if you post some thing that gets qouted and then you update (edit) your post then it would automatically get updated in the quoted post also. Maybe I am thinking too advanced but it would help.

[CPLS SS]

So I have read a lot on the forum about catch
can. Forgive me if this sounds dumb first nice
car for me, should I be using one? And if so what
do you recommend.

[BenningJ]

Originally Posted by CPLS SS

So I have read a lot on the forum about catch
can. Forgive me if this sounds dumb first nice
car for me, should I be using one? And if so what
do you recommend.

Well I have one from RX Performance but I didn't have one on for the first 40,000 miles. I have not cleaned it out yet to see how much oil I have in it but I can tell you this after 40,000 miles the intake had a moderate coating of oil on it. I will have to post up pictures when I get a chance. Lucky I had very little build up on my valves. With that being said, I drive the hell out of my car and I have my oil changed regularly using the Mobile1 full synthetic. My driving habits are also a bit more aggressive than most, both in acceleration/deceleration but I also drive more than most so my outcome from not having one could be very different from others.

[rberns]

Originally Posted by CPLS SS

So I have read a lot on the forum about catch
can. Forgive me if this sounds dumb first nice
car for me, should I be using one? And if so what
do you recommend.

Yes, I definitely recommend you getting one. I have the RX Performance catch can I bought from JDPMotorsports.com however I caution you on getting an oil breather as many people have problems with blowing their rear main seal. Are you going to the car shows this weekend. If so many of us could talk more indepth there an show you more.

[INTIMIDAT3R]

Originally Posted by rberns

Wow, this day just can't get any better. RPI sent me my tracking information for my custom engine cover. James step aside, I am getting all the tropheys now. ahahah

Let me know how that works out for you.

Here's a little secret... I won all my trophies last year with stock everything under the hood. I got my intake from CAI, Inc. in September of last year and only had it for a couple of shows.

The hydrocoating wasn't done at all until November right before I put the car away.

[camaros and vettes]

im looking at divorce man is it ugly to look at :(

[rberns]

Originally Posted by camaros and vettes

im looking at divorce man is it ugly to look at :(

Sorry to hear that. Hope things get better for you and your daughter. If you need anything from ICE just let us know.

[INTIMIDAT3R]

Originally Posted by rberns

Sorry to hear that. Hope things get better for you and your daughter. If you need anything from ICE just let us know.

+INFINITY brother.

Prayers to you and your family.

[Quackersacker]

Well I finally got my afterburners got to get those installed. Going to remove my cross brace have that polished by a friend, toesuf?, kidding, my friends company said they would get it done and they polish a lot of metal. I'm getting my heritage grill and blacking out my bow ties. Have some definite ideas for under the hood including a CAI. Opinions on that, my friends, would be appreciated. What did u put in and why?
Ok thats my car talk

[INTIMIDAT3R]

Originally Posted by Quackersacker

Well I finally got my afterburners got to get those installed. Going to remove my cross brace have that polished by a friend, toesuf?, kidding, my friends company said they would get it done and they polish a lot of metal. I'm getting my heritage grill and blacking out my bow ties. Have some definite ideas for under the hood including a CAI. Opinions on that, my friends, would be appreciated. What did u put in and why?
Ok thats my car talk

I put in a cold air intake from CAI, Inc. www.ColdAirInductons.com

Proven power gains and it looks cool.

[toesuf94]

I will polish another strut brace...but it is going to cost a lot of money. If it comes out better than mine, I will just give you mine so you can have the first one done.

Actually, I am in no hurry to EVER polish another of those by hand again. Ugh.

Camaros and Vettes: Sorry about your divorce - If you need to get away, let us all know. We are here for you. Life sometimes can be a PITA...but in the end, you have to try to think positively - you still have your daughter and you have your friends here.

[camaros and vettes]

thanks guys!!

[Quackersacker]

Camaros and Vettes: Sorry about your divorce - If you need to get away, let us all know. We are here for you. Life sometimes can be a PITA...but in the end, you have to try to think positively - you still have your daughter and you have your friends here.[/QUOTE]

+1
If you ever want to go for a drive again call me, that was a great little route you took us on.