08-09-2013, 09:50 PM | #1 |
Drives: Black/Grey Stripe 2011 Chevy Camaro Join Date: Dec 2012
Location: Louisiana
Posts: 45
|
HELP Hooking up LED grill light to fuse box
I want to hook up my LED grill light to my fuse box. I want it to turn on with the dome light(when doors open). Does anyone know which fuse I should connect it to? Thanks
|
08-09-2013, 09:55 PM | #2 |
I would just run the wires to the cabin and tap into the grey wire for the dome light.
|
|
08-09-2013, 10:03 PM | #3 |
Drives: Black/Grey Stripe 2011 Chevy Camaro Join Date: Dec 2012
Location: Louisiana
Posts: 45
|
|
08-09-2013, 10:24 PM | #4 |
Check out the thread below to see where the dome light wire is and how to wire. To run wire into your cab just feel on your fire wall inside your hood in the top right corner. there are some grommets there you can use, it is by where the red POWER wire goes through the fire wall. Inside the cab take off your trim by your door sill and the driver kick panel and move your carpet down, when you use a hanger to push wire through from the engine bay you should be able to see them easily. Good luck man.
http://www.camaro5.com/forums/showthread.php?t=150945 |
|
08-10-2013, 12:37 AM | #5 |
Drives: Black/Grey Stripe 2011 Chevy Camaro Join Date: Dec 2012
Location: Louisiana
Posts: 45
|
That will help a lot. Thanks!
|
|
|
|
|