You are browsing camaro5 
 |
|
01-31-2014, 10:31 AM
|
#15 |
  
Drives: 2010 Camaro 2SS/RS LS3 Join Date: Oct 2013
Location: Kernersville, NC
Posts: 931
|
mine were in the car when I bought it used and wl stay with the car if and when I sell it
__________________
Hurst Short Throw Shifter, K&N CAI, SRP Racing Pedals, GM Performance Exhaust, GM GFX Package
Lakewood Strut Tower Brace, JBA Shorty Headers, JBA 8 MM Wires, Airaid TB Spacer, Phastek CAI Scoop, Washer Bottle Relocation Kit, Stainlees Steel Brake Lines, Brake Performance Slotted and Drilled Rotors, BMR Tunnel Brace, BMR Trailing Arms, BMR Subframe Connectors, Borla ATAK Muffelers, Z28 Wickerbill Spoiler, VTC, Bow Tie Delete, BMR Adjustable Front Swaybar, BMR End Link Kit, BMR Extreme Rear Anti-Roll Kit, Diablo I1000 "InTune" |
|
|
|
01-31-2014, 03:27 PM
|
#16 |
|
Scott's45
Drives: 2012 2SS 45th Anniversary Join Date: Mar 2012
Location: New Hampshire
Posts: 557
|
Here is the one that was in my trunk. Can't believe I didn't think of taking a picture of it sooner! Not sure if this is a build sheet or not.
__________________
2012 2SS 45th Anniversary, Hurst short throw shifter, Stainless Power LT headers, high flow cats, SW Retro Chambered 3" cat back, CAI, Heritage grill, tinted windows, red/silver hash stripes, AAC LED sidemarkers, blacked out turn signals/tail lights, splash guards. 402RWHP
 |
|
|
|
|
02-01-2014, 01:45 PM
|
#17 |
 
Drives: Synergy Green 2SS/RS/HURST Join Date: Aug 2010
Location: Saratoga Springs, NY
Posts: 442
|
That's one of them for sure.
__________________
2011 2SS/RS - Factory Hurst - Synergy Green - Cyber Gray Rally Stripes - Jet Black Interior - Born on 10/4/2010
 2G1FT1EW7B9128807 Ordered: 8/6/2010 1100: 8/6/2010 2000: 8/23/2010 2051: 8/10/2010 2500: 8/24/2010 3000: 8/25/2010 3100: 9/8/2010 3300: 9/8/2010 3400: 9/11/2010 3800: 10/4/2010 4000: 10/4/2010 4200: 10/4/2010 5000: 10/13/2010 6000: 10/14/2010 |
|
|
|
|
02-01-2014, 01:56 PM
|
#18 |
Drives: 2SS Cammed up, Clear Bra, Clean Join Date: Jan 2010
Location: Roseville
Posts: 405
|
I've had mine framed in the trunk since "Day 1"
|
|
|
|
|
02-01-2014, 03:11 PM
|
#19 |
   
Drives: 2011 Camaro 2LT RS Convertible Join Date: Jul 2011
Location: USAREUR, CONUS/DOD-A, VA
Posts: 1,745
|
You can go to your Chevy dealer's service dept., given them your VIN and they'll print your Camaro's build sheet for you, free of charge.
__________________
2011 Camaro 2LT RS Convertible
Summit White Black Leather 3 Pedals Build Date: 06/27/2011 Purchased: 07/30/2011 Title Received: 08/15/2011 1984 Camaro (3rd Gen.): Traded: 1987 "Meet the new boss. Same as the old boss." |
|
|
|
|
02-05-2014, 06:07 PM
|
#20 |
|
Drives: Synergy Green 2SS/RS/HURST Join Date: Aug 2010
Location: Saratoga Springs, NY
Posts: 442
|
Yes the dealer can print them, but they will not be the copies that followed the car down the line. They will be on plain 8.5x11 paper.
__________________
2011 2SS/RS - Factory Hurst - Synergy Green - Cyber Gray Rally Stripes - Jet Black Interior - Born on 10/4/2010
2G1FT1EW7B9128807 Ordered: 8/6/2010 1100: 8/6/2010 2000: 8/23/2010 2051: 8/10/2010 2500: 8/24/2010 3000: 8/25/2010 3100: 9/8/2010 3300: 9/8/2010 3400: 9/11/2010 3800: 10/4/2010 4000: 10/4/2010 4200: 10/4/2010 5000: 10/13/2010 6000: 10/14/2010 |
|
|
|
|
02-09-2014, 09:25 AM
|
#21 |
|
Built with Pride "Oshawa"
Drives: 2011 Chev Silverado Z71 Crew Join Date: Oct 2008
Location: Camaro Build Team , Oshawa
Posts: 1,445
|
There will be two door rider build sheets in each of the inner door pockets and one more detailed build sheet in the trunk along with the floor mats at time of delivery. Always ask for these document's when your Camaro arrives, otherwise in most cases they are removed and lost for good . Sometimes if your real lucky you'll find a door rider in the centre console glovebox that's been signed!
Mike Judge Super60
__________________
 In Memory of Dawson Ellert . |
|
|
|
|
02-09-2014, 10:13 AM
|
#22 |
      
Drives: SUMMIT WHITE 2SS/RS CAMARO Join Date: Feb 2008
Location: 2018: Lakewood Ranch, Fl.
Posts: 8,112
|
When my dealer called and said my car had just arrived, 30 minutes late I was there to remove
the front license plate bracket from the trunk. I also took the build sheet, window stickers, every piece of paper, the plastic seat covers, etc.
__________________
 |
|
|
|
|
02-09-2014, 11:17 AM
|
#23 | |
Drives: 2014 camaro ss ,1967 chevelle ss, Join Date: Sep 2013
Location: loganville
Posts: 1,209
|
Quote:
__________________
 |
|
|
|
|
|
02-09-2014, 07:16 PM
|
#24 |
|
Russ
Drives: Yukon Denali, Charger, CamaroSS Join Date: Jun 2009
Location: Ohio
Posts: 2,811
 |
I asked the dealer to do nothing when my car came in, no prep of any kind. I have the original plastic that goes on the seats and I have kept the plastic on the carpet under the floor mats. I for sure got my build sheet, it was under the seat.
|
|
|
|
|
02-10-2014, 07:10 AM
|
#25 |
|
Drives: SUMMIT WHITE 2SS/RS CAMARO Join Date: Feb 2008
Location: 2018: Lakewood Ranch, Fl.
Posts: 8,112
|
^^^^^^ That plastic under the floor mats on my camaro are there 32,000 miles later.
I never saw any reason to remove them. Actually my factory mats have never been removed. I've got mats for the mats which I can remove and clean... Talk about keeping it original. lol.
__________________
|
|
|
|
|
03-07-2014, 01:13 PM
|
#26 |
|
High-tech Redneck
Drives: '10 CGM SS, '02 2500HD, '09 300SRT8 Join Date: Nov 2010
Location: Lexington, KY
Posts: 757
|
@myold88^^ Be sure to toss some of those moisture packets like you find in a new pair of shoes into your floorboard (maybe toss them under the plastic). If you are not removing the plastic, you may not be driving it much either which means it could be setting for a while gathering moisture from the air and temp changes...ie..sweating. This moisture cannot evaporate if there is plastic acting as a barrier. We don't want mold now do we?
__________________
"My friends call me Chris. Are you my friend?"
 2010 CGM L99 2SS/RS - GPI SS3 VVT, BTR DoD Delete, Circle D 4c, BTR springs, Katech C5R Timing Chain, MRR-228 315/275, CAI, Elite catch-can, TSP 1 7/8" Headers + offroad pipes, Magnaflow 3", Pfadt springs, BMR LCAs, toelinks, trailing arms, cradle bushings, & sway bars w/ endlinks, Vitesse paddles, heritage grille, and an eBay splitter. Power upgrades by Race Proven Perf.; Tuning by ShorTuning. |
|
|
|
|
03-07-2014, 02:15 PM
|
#27 |
|
Drives: SUMMIT WHITE 2SS/RS CAMARO Join Date: Feb 2008
Location: 2018: Lakewood Ranch, Fl.
Posts: 8,112
|
^^^^ I've looked. No problem.... Thanks for your concern.
__________________
|
|
|
|
|
03-08-2014, 07:57 PM
|
#28 | |
|
Drives: Synergy Green 2SS/RS/HURST Join Date: Aug 2010
Location: Saratoga Springs, NY
Posts: 442
|
Quote:
__________________
2011 2SS/RS - Factory Hurst - Synergy Green - Cyber Gray Rally Stripes - Jet Black Interior - Born on 10/4/2010
2G1FT1EW7B9128807 Ordered: 8/6/2010 1100: 8/6/2010 2000: 8/23/2010 2051: 8/10/2010 2500: 8/24/2010 3000: 8/25/2010 3100: 9/8/2010 3300: 9/8/2010 3400: 9/11/2010 3800: 10/4/2010 4000: 10/4/2010 4200: 10/4/2010 5000: 10/13/2010 6000: 10/14/2010 |
|
|
|
|
|
|
|
|
 |
| Thread Tools | |
|
|
