My 2010 Inferno 2SS/RS - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

yotaman96 · 07-22-2011, 02:30 PM

I figured it was time to start my journal. I bought my Camaro used from a Ford dealership with 8188 miles on 03/31/11.

Here's a couple of pics loading it on my trailer the day I picked it up.

Dyno day. Only mods were the K&N CAI and a Predator tune that came with the car. Dyno is load bearing and very stingy, so I was impressed with 380 rwhp.

Quick vid showing my sequential tail lights.
http://s28.photobucket.com/albums/c2...t=47662c6b.mp4

Pfadt lowering springs.

Pics with it lowered.

Barton short throw shifter.

Can also change to this anytime.

Full Kooks exhaust. Catback is the Street Sleeper.

HUD install.

Colored all of the stitching from white to orange.

DSS 1400 hp axles.

Heritage grille waiting for me to install. Custom emblem painted IOM by Sparks. Also have the rear SS to go on.

New intake waiting for me to install.

73camarolt · 07-22-2011, 05:11 PM

Looks good with those springs! Post numbers after whipple.

ReallywantAcamaro · 07-22-2011, 05:27 PM

All that for a HUD... Wow your insane lol I'd be scared. I like the stitching... How does it look in person? And how did you do it exactly.

Wantconvertible · 07-22-2011, 05:37 PM

All you had to do is buy some legos ,if you wanted to take something apart wow thats a lot of work ,enjoy
p.s. move that ladder it might fall over on the car

ckaram · 07-22-2011, 05:51 PM

Wow! You've been busy. Post up pics of your progress!

r1concepts · 07-22-2011, 06:25 PM

That is a good list of mods! Cant wait and see what your car looks like in the end.

yotaman96 · 07-22-2011, 06:45 PM

Quote:

Originally Posted by ReallywantAcamaro

All that for a HUD... Wow your insane lol I'd be scared. I like the stitching... How does it look in person? And how did you do it exactly.

The stitching looks great in person. It looks like it came that way from the factory. We used Elmers paint pens to do it. With my wife helping, it took about two hours. Just color a bit at a time and wipe with a damp cloth to get the paint off the leather. The cloth sections took a bit longer. I found dabbing instead of wiping the cloth section helped. I've noticed some seems to have come off the armrest, but my wife doesn't think so. Either way, it's an easy spot to touch up.

yotaman96 · 07-27-2011, 01:55 AM

Had Weldcraft widen some stock rear wheels 1.5" for a total width of 10.5".

A little bit of paint to conceal the welds.

shadow09 · 07-27-2011, 02:02 AM

nice build

can't wait for everything to come together

yotaman96 · 07-30-2011, 03:19 PM

Got the NT05R's mounted today. Still waiting on the backordered rear Invos.

2010 SSRS · 07-30-2011, 03:22 PM

wow, that is one awesome Camaro you have.

navyblueSS · 07-30-2011, 03:32 PM

Nice, looks good.

TRC-SS · 07-30-2011, 07:35 PM

HOLY GOD DAAAAMN.....You have done a ton in a short amount of Time

yotaman96 · 08-06-2011, 06:20 PM

Got around to installing the DSS axles.

Also installed a color matched XM antenna from RPI.

07-22-2011, 02:30 PM	#1
yotaman96 Drives: 2017 Camaro SS1LE 2000 Trans Am WS6 Join Date: Jul 2008 Location: Portland, TN Posts: 2,955 View My Garage	My 2010 Inferno 2SS/RS I figured it was time to start my journal. I bought my Camaro used from a Ford dealership with 8188 miles on 03/31/11. Here's a couple of pics loading it on my trailer the day I picked it up. Dyno day. Only mods were the K&N CAI and a Predator tune that came with the car. Dyno is load bearing and very stingy, so I was impressed with 380 rwhp. Quick vid showing my sequential tail lights. http://s28.photobucket.com/albums/c2...t=47662c6b.mp4 Pfadt lowering springs. Pics with it lowered. Barton short throw shifter. Can also change to this anytime. Full Kooks exhaust. Catback is the Street Sleeper. HUD install. Colored all of the stitching from white to orange. DSS 1400 hp axles. Heritage grille waiting for me to install. Custom emblem painted IOM by Sparks. Also have the rear SS to go on. New intake waiting for me to install. __________________ 2017 Krypton Green SS 1LE Magnacharged 2000 Trans Am WS6 manual trans 2002 Trans Am 2015 Ram Crew Cab Cummins Last edited by yotaman96; 07-26-2011 at 01:25 AM.

07-22-2011, 05:11 PM	#2
73camarolt Drives: 2002 Camaro SS Join Date: Feb 2009 Location: Germantown, MD Posts: 2,355 View My Garage	Looks good with those springs! Post numbers after whipple. __________________ 2002 Camaro SS- BTR Stage 3, 799 Heads, Bolt on's Tuned by John at Broadview Automotive.. 420hp and 400tq

07-22-2011, 05:51 PM	#5
ckaram Drives: 2011 2SS RS, 1968 ragtop Join Date: Apr 2009 Location: Indiana Posts: 1,850	Wow! You've been busy. Post up pics of your progress! __________________ 1968 Camaro Convertible LS1, T56

07-27-2011, 01:55 AM	#8
yotaman96 Drives: 2017 Camaro SS1LE 2000 Trans Am WS6 Join Date: Jul 2008 Location: Portland, TN Posts: 2,955 View My Garage	Had Weldcraft widen some stock rear wheels 1.5" for a total width of 10.5". A little bit of paint to conceal the welds. __________________ 2017 Krypton Green SS 1LE Magnacharged 2000 Trans Am WS6 manual trans 2002 Trans Am 2015 Ram Crew Cab Cummins

07-27-2011, 02:02 AM	#9
shadow09 H-Town Camaro Club Drives: 2013 1LE Join Date: Apr 2009 Location: Pearland, Texas Posts: 957	nice build can't wait for everything to come together __________________ Black 2013 1LE - Bolt ons - Heads - Cam- Suspension - Built by Jrod - Sorian Tuned

07-22-2011, 05:27 PM	#3
ReallywantAcamaro Drives: Ford Explorer Sport Trac Join Date: Jul 2011 Location: NJ Posts: 55	All that for a HUD... Wow your insane lol I'd be scared. I like the stitching... How does it look in person? And how did you do it exactly.

07-22-2011, 05:37 PM	#4
Wantconvertible Drives: 2011 SS/RS VERT Join Date: Mar 2010 Location: PHILA PA Posts: 1,615	All you had to do is buy some legos ,if you wanted to take something apart wow thats a lot of work ,enjoy p.s. move that ladder it might fall over on the car

07-22-2011, 06:25 PM	#6
r1concepts Drives: Camaro Join Date: Nov 2009 Location: Cerritos, CA Posts: 882	That is a good list of mods! Cant wait and see what your car looks like in the end.

07-30-2011, 03:19 PM	#10
yotaman96 Drives: 2017 Camaro SS1LE 2000 Trans Am WS6 Join Date: Jul 2008 Location: Portland, TN Posts: 2,955 View My Garage	Got the NT05R's mounted today. Still waiting on the backordered rear Invos. __________________ 2017 Krypton Green SS 1LE Magnacharged 2000 Trans Am WS6 manual trans 2002 Trans Am 2015 Ram Crew Cab Cummins

07-30-2011, 03:22 PM	#11
2010 SSRS Drives: 3 V8 Camaros Join Date: May 2009 Location: The Ocean State Posts: 111,187 View My Garage	wow, that is one awesome Camaro you have. __________________ Jannetty Racing JRE Street Package

07-30-2011, 03:32 PM	#12
navyblueSS Drives: 2002 Camaro SS Join Date: Jul 2009 Location: Quitman, LA Posts: 609	Nice, looks good. __________________ 2015 1LE - CAI intake, TSP longtubes, NPP, Futral Motorsports tuned, BMR 1"lowering springs, BMR trailing arms

07-30-2011, 07:35 PM	#13
TRC-SS 700RWHP-650TQ Drives: 2011 Forged LS3 Supercharged/Cammed Join Date: Aug 2010 Location: Shrewsbury Massachusetts Posts: 5,269 View My Garage	HOLY GOD DAAAAMN.....You have done a ton in a short amount of Time __________________ View Build HERE>>>>>MY 2011 2SS/RS JOURNAL

08-06-2011, 06:20 PM	#14
yotaman96 Drives: 2017 Camaro SS1LE 2000 Trans Am WS6 Join Date: Jul 2008 Location: Portland, TN Posts: 2,955 View My Garage	Got around to installing the DSS axles. Also installed a color matched XM antenna from RPI. __________________ 2017 Krypton Green SS 1LE Magnacharged 2000 Trans Am WS6 manual trans 2002 Trans Am 2015 Ram Crew Cab Cummins

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Over 230 Satisfied 2010 Camaro Customers! Paddock Chevrolet has 40 in stock NOW	camarojoe	Dealer Camaros for Sale	2	05-24-2010 05:58 PM