Question about the gmx ground effects exhaust exits - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

hennesseycamaro11 · 06-16-2017, 11:32 PM

Just a quick question that im struggling with. Does anyone know if i were to put a GM style (GMX) ground effects package on a 2010 SS if the exhaust will need any adjusting? Ive seen exhausts that are specific for the GMX kit but i didnt know if i would have to change or move the exhaust tips and mufflers around if i installed one. The specific kit im getting is the Carbon Creations GMX style ground effects finished in carbon fiber. Idk of that will help lol. Thanks!

2010reddevil · 06-17-2017, 12:58 PM

Iirc, the gfx systems have specific tip lengths to match that bumper cover. You could probably tweak whatever tips you can fit in there without much issue is imagine.

Jrichards73 · 06-18-2017, 07:17 PM

They are in the same spot, issue is tip size fitting the square opening.

TRC-SS · 06-19-2017, 03:48 PM

The GM Ground effects kit was meant to work with the stock round factory tips or the square after market ones.

The GM kit has a small notch to allow the factory tips to sit in the square hole. The problem you will run into is you have an aftermarket exhaust. The tips would have to be the same diameter and distance as the factory to sit in the hole correctly.

If not any shop can cut the pipe behind the tips and suck them in to have them fit.

URDAMAN · 06-19-2017, 08:24 PM

Mpbr makes tips that will fit, i had to cut 3 inches to get the alignment I wanted

Royal Tiger · 06-19-2017, 08:46 PM

I have rectangular tips on mine. Looks much better than stock.

06-16-2017, 11:32 PM	#1
hennesseycamaro11 Drives: 2020 RGM ZL1 1LE Join Date: Sep 2011 Location: Georgia Posts: 97	Question about the gmx ground effects exhaust exits Just a quick question that im struggling with. Does anyone know if i were to put a GM style (GMX) ground effects package on a 2010 SS if the exhaust will need any adjusting? Ive seen exhausts that are specific for the GMX kit but i didnt know if i would have to change or move the exhaust tips and mufflers around if i installed one. The specific kit im getting is the Carbon Creations GMX style ground effects finished in carbon fiber. Idk of that will help lol. Thanks! __________________ 2020 Camaro ZL1 1LE Rally Green Metallic 2010 Camaro 2SS/RS (Gone but never forgotten) -FAST LSXR 102 -Vortech V3 SI Supercharger -Pulleys -Shake N Bake Cam (233/248) -ALKY meth injection -TSP 1-7/8” headers -Catless X pipe -NPP w/ M2W -Eibach Coilovers -22" Dub S116 Wheels -Fesler Aero Package -3M matte black wrap

06-17-2017, 12:58 PM	#2
2010reddevil Drives: 2010 Camaro 2SS Victory Red 6M Join Date: Apr 2015 Location: Gulf Coast, TX Posts: 1,424	Iirc, the gfx systems have specific tip lengths to match that bumper cover. You could probably tweak whatever tips you can fit in there without much issue is imagine. __________________ 2011 2SS 6A Red Jewel Metallic, Vararam Tune CAI, Magnaflow 3" Competition c/b, Speed Engineering 1-7/8 LT's, Circle D 5C, M/T 275/40R20 S/S, HPTuners tune by Ryan@GPI 12.3 @ 112 ACM as of 12/22/19 Gone on 12/28/19 R I P 2010 2SS 6M Victory Red/Black (old ride) CAI intake, Speed Engineering 1 7/8" LT's, X4 base tune, Flowmaster Outlaw axle-back. 12.6 @ 115 SAR as of 9/19/15 Gone but never forgotten.

06-18-2017, 07:17 PM	#3
Jrichards73 Drives: 2011 2SS/RS Victory Red Join Date: Aug 2011 Location: Virginia Posts: 921	They are in the same spot, issue is tip size fitting the square opening. __________________ Updates: BTR Stage 2 VVT Cam Kit w/Smith Brothers Trunnions, Fluidampr, RX catch can, B&M Trans pan mod, Kooks Black Headers, Borla S-tunes, Eibach Multi-Pro-R2 coilovers and Swaybars, BMR Full Bushing kit with Toe and Trailing arms, RB Rotors w/EBC Pads, GForce 1400 Axles (now on order). AVH-X5800BHS in Scosche GM5201AB.

06-19-2017, 03:48 PM	#4
TRC-SS 700RWHP-650TQ Drives: 2011 Forged LS3 Supercharged/Cammed Join Date: Aug 2010 Location: Shrewsbury Massachusetts Posts: 5,269 View My Garage	The GM Ground effects kit was meant to work with the stock round factory tips or the square after market ones. The GM kit has a small notch to allow the factory tips to sit in the square hole. The problem you will run into is you have an aftermarket exhaust. The tips would have to be the same diameter and distance as the factory to sit in the hole correctly. If not any shop can cut the pipe behind the tips and suck them in to have them fit. __________________ View Build HERE>>>>>MY 2011 2SS/RS JOURNAL

06-19-2017, 08:24 PM	#5
URDAMAN Drives: 2010 IBM 2SS / RS Join Date: May 2010 Location: Augusta, GA Posts: 204 View My Garage	Mpbr makes tips that will fit, i had to cut 3 inches to get the alignment I wanted Attached Images

06-19-2017, 08:46 PM	#6
Royal Tiger Account Suspended Drives: 2013 2SS/RS Convertible Join Date: Apr 2016 Location: Lehigh Valley, PA Posts: 3,873	I have rectangular tips on mine. Looks much better than stock.