SCT Wideband data log. - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Badbubba · 09-23-2012, 11:22 PM

Quote:

Originally Posted by sting808

The SCT device uses a firewire connector/cable on the unit for ease of connection, but all it does is connects the device to the wideband with pigtails on the other end. The signal is a standard analog DC output into the SCT. You can get a 6-conductor firewire(1394) cable and cut the connector off one end and use that. I would only suggest this if you are comfortable with identifying the proper pinout for the signal.

Yes I have one.

Although doubtful, I was concerned that Justacamaro may want to connect the signal from the metering device directly to the computer. Although the cable would have to be a 4 pin USB type A and not the firewire 400 cable which is a 6 connector. When things don't work and I get desperate, I'll try anything.

PQ · 09-24-2012, 12:26 PM

Quote:

Originally Posted by Southern Comfort

Blue Tooth? Are you talking about an SCT Blue Tooth or something else?
I have been using a DashDaq to log. ~$500 for straight OBDC connection. It's a standalone unit that provides connectors for analog inputs, but I havent tried any yet.

Mine is BlueTooth. They have WiFi ones as well.