Davenport's Project ZL1 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Davenport · 04-04-2013, 05:30 PM

Here's a few shot's and some info on our Project ZL1.

We finally were able to get our hands on one of these bad boys. We immediately started modifying it! We started with our stage 5 upgrade http://www.davenportmotorsports.com/packages/41.

As we're an ADV.1 distributor we decided to go with a new wheel from them, this is the new two piece MV2 5.0 in brushed cleared finish.

We installed Eibach pro kit springs as well.

Here's the current dyno on it.

We're going to try a bigger cam in it. If it makes more power AND has good drivability we may offer it as a Stage 6 package.

Thanks for looking!

Namala

NFRNOSS · 04-04-2013, 09:09 PM

Stage 6....crazy.

The Stig · 04-04-2013, 09:10 PM

Damn those wheels are gorgeous.

cheaplabor · 04-04-2013, 09:54 PM

Nice

KaotiK · 04-04-2013, 09:59 PM

Ooh... Stage 6! Make sure to let me know how that turns out Namala! I got my ZL1 booked in for a stage 5+ upgrade May 13th... I can hardly wait!

dragon22 · 04-05-2013, 01:12 AM

I saw this on the March 29, 2013 cruise. That car is awesome! Sounds great too. Namala is a heck of a nice guy, but I didn't get a chance to drive it. Don't understand that one.

LOL

Really though, it is a monster. Namala had a real hard time getting traction. I think the ground was still a bit too cold for the goodyears.

Trackman · 04-05-2013, 12:38 PM

The goodyears are no match for 650hp!

dragon22 · 04-05-2013, 03:07 PM

The gen 2 f1's are supposed to get real sticky when hot. Time will tell

Davenport · 04-05-2013, 06:05 PM

A little video for everyone.

Davenport · 04-05-2013, 06:42 PM

Quote:

Originally Posted by The Stig

Damn those wheels are gorgeous.

Thank you! We're really pleased at how they turned out. 1lb lighter each, than the factory wheels too.

Quote:

Originally Posted by cheaplabor

Nice

Thanks!

Quote:

Originally Posted by KaotiK

Ooh... Stage 6! Make sure to let me know how that turns out Namala! I got my ZL1 booked in for a stage 5+ upgrade May 13th... I can hardly wait!

It didn't work out the way we wanted. Lost hp, but gained a little torque.

Sooooo, we're pulling it out and trying another cam!

Quote:

Originally Posted by dragon22

I saw this on the March 29, 2013 cruise. That car is awesome! Sounds great too. Namala is a heck of a nice guy, but I didn't get a chance to drive it. Don't understand that one.

LOL

Really though, it is a monster. Namala had a real hard time getting traction. I think the ground was still a bit too cold for the goodyears.

Thanks! I really enjoyed driving this one, that's why I didn't let anyone else drive it!

It was tough putting the power down. 1st gear was useless, had to peddle it in second, it would stay hooked in third and mama mia would it inhale the road!

Quote:

Originally Posted by Trackman

The goodyears are no match for 650hp!

She's a tich past 650.

Quote:

Originally Posted by dragon22

The gen 2 f1's are supposed to get real sticky when hot. Time will tell

The ZL1 & 1LE Gen 2's have a different compound than other Gen 2's so that's were the extra stick comes from. I'm loving how Chevy is sweating the details to make the Camaro kick some world class butt!

slickz28 · 04-05-2013, 06:51 PM

What did you do with stock rims and tires, might be intrested in them. Were they the 10 spoke black or aluminum rims?

cheaplabor · 04-05-2013, 08:49 PM

I have a deal for you guys you can't pass up, I'll trade you my ultra rare 2200 km aqua blue 2ss/rs that's never even seen an overcast day straight up for your obviously Dyno abused run of the mill ZL1

fshog · 04-06-2013, 08:24 AM

Quote:

Originally Posted by cheaplabor

I have a deal for you guys you can't pass up, I'll trade you my ultra rare 2200 km aqua blue 2ss/rs that's never even seen an overcast day straight up for your obviously Dyno abused run of the mill ZL1

wbdinger · 04-06-2013, 10:26 AM

Quote:

Originally Posted by Davenport

A little video for everyone.

04-04-2013, 05:30 PM	#1
Davenport Drives: 2016 with, Magnuson Heartbeat, FF15 Join Date: Sep 2009 Location: Calgary, Alberta Canada Posts: 304	Davenport's Project ZL1 Here's a few shot's and some info on our Project ZL1. We finally were able to get our hands on one of these bad boys. We immediately started modifying it! We started with our stage 5 upgrade http://www.davenportmotorsports.com/packages/41. As we're an ADV.1 distributor we decided to go with a new wheel from them, this is the new two piece MV2 5.0 in brushed cleared finish. We installed Eibach pro kit springs as well. Here's the current dyno on it. We're going to try a bigger cam in it. If it makes more power AND has good drivability we may offer it as a Stage 6 package. Thanks for looking! Namala

04-04-2013, 09:10 PM	#3
The Stig knows 2 facts about ducks Drives: ...and they're both wrong Join Date: Aug 2009 Location: The HMS Invincible Posts: 25,072 View My Garage	Damn those wheels are gorgeous. __________________

04-04-2013, 09:59 PM	#5
KaotiK Drives: 2012 Camaro ZL1 Join Date: Oct 2011 Location: Alberta, Canada Posts: 242 View My Garage	Ooh... Stage 6! Make sure to let me know how that turns out Namala! I got my ZL1 booked in for a stage 5+ upgrade May 13th... I can hardly wait! __________________ 2012 ZL1 #478, BLACK, 6 SPD MANUAL, EXPOSED CARBON FIBER HOOD, BLACK 10 SPOKE WHEELS, SUNROOF, SUEDED APP. PACKAGE. 1000 Initial Order 11/29/2011Doug Marshall Chevrolet 1100 Order accepted at dealer: 11/29/2011 - QBFFHK 2000 Order accepted by GM: 01/24/2012 3000 Accepted By Production Control: 01/24/2012TPW - 03/05/2012 3100 Sequenced: 02/20/2012 3300 Scheduled For Production:02/20/2012 3400 Broadcast: 02/22/2012 3800 Produced: 03/07/2012 4000 Available To Ship: 03/07/2012 4200 Shipped: 04/05/2012 5000 Delivered To The Dealer: 04/13/2012 6000 Delivered To Customer: 04/19/2012

04-04-2013, 09:09 PM	#2
NFRNOSS Drives: 2010 Camaro 2SS/RS LS3 IOM Join Date: Aug 2012 Location: Calgary, Alberta, Canada Posts: 1,523 View My Garage	Stage 6....crazy.

04-04-2013, 09:54 PM	#4
cheaplabor It the toybox 4 winter Drives: LSA 68f100 pickup/2010 rs/2ss abm Join Date: May 2009 Location: okotoks,alberta, canada Posts: 270	Nice

04-05-2013, 01:12 AM	#6
dragon22 Drives: 2010 Camaro 2SS/RS SIM Join Date: Apr 2009 Location: Calgary, Alberta Posts: 1,697 View My Garage	I saw this on the March 29, 2013 cruise. That car is awesome! Sounds great too. Namala is a heck of a nice guy, but I didn't get a chance to drive it. Don't understand that one. LOL Really though, it is a monster. Namala had a real hard time getting traction. I think the ground was still a bit too cold for the goodyears.

04-05-2013, 12:38 PM	#7
Trackman Drives: 67RS Camaro ,Black 2013 ZL1 Join Date: Jun 2010 Location: Alberta Posts: 1,408	The goodyears are no match for 650hp!

04-05-2013, 03:07 PM	#8
dragon22 Drives: 2010 Camaro 2SS/RS SIM Join Date: Apr 2009 Location: Calgary, Alberta Posts: 1,697 View My Garage	The gen 2 f1's are supposed to get real sticky when hot. Time will tell

04-05-2013, 06:51 PM	#11
slickz28 Drives: 2010 camaro ss/rs Join Date: Oct 2010 Location: Alberta, Canada Posts: 53	What did you do with stock rims and tires, might be intrested in them. Were they the 10 spoke black or aluminum rims?

04-05-2013, 08:49 PM	#12
cheaplabor It the toybox 4 winter Drives: LSA 68f100 pickup/2010 rs/2ss abm Join Date: May 2009 Location: okotoks,alberta, canada Posts: 270	I have a deal for you guys you can't pass up, I'll trade you my ultra rare 2200 km aqua blue 2ss/rs that's never even seen an overcast day straight up for your obviously Dyno abused run of the mill ZL1