Ordered Roto-Fab Reservoir Parts needed? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

BeardWS6 · 11-13-2015, 12:05 PM

I ordered the reservoir and she said I would need to get a Napa 9820 hose. Is their anything else I would need to get to finish the install?
When filling the reservoir I get Dexcool and a water mix. What is the mixture percentage and anything else I need to do? Any install issues I would run into and how did you guys run the hoses? Thanks!

Travis104 · 11-13-2015, 01:26 PM

If you have a CAI brand intake, you will need the offset stud that rotofab sells for about $4. A lot of people put wetter water in to help cool things a little more.

jayno20 · 11-13-2015, 02:58 PM

Quote:

Originally Posted by BeardWS6

I ordered the reservoir and she said I would need to get a Napa 9820 hose. Is their anything else I would need to get to finish the install?
When filling the reservoir I get Dexcool and a water mix. What is the mixture percentage and anything else I need to do? Any install issues I would run into and how did you guys run the hoses? Thanks!

couple hose clamps and that's it. I got the premixed 50/50 dexcool stuff and dumped it in and was good to go.

97ChameleonTA · 11-13-2015, 04:12 PM

Quote:

Originally Posted by jayno20

couple hose clamps and that's it. I got the premixed 50/50 dexcool stuff and dumped it in and was good to go.

What he said, easy peasy.

BeardWS6 · 11-13-2015, 11:08 PM

Thanks!

BeardWS6 · 11-15-2015, 01:54 PM

How much water wetter do I add?

jayno20 · 11-15-2015, 02:28 PM

The back of the bottle should tell you everything you need to know...

BeardWS6 · 11-16-2015, 09:06 PM

How do I know which hose connects to the reservoir from the blower, then the reservoir to the pump?

Harley01 · 11-16-2015, 09:21 PM

The bottom port on the supercharger goes to the top of the roto fab res (inlet). The supercharger pump hooks to the bottom of the roto fab res (outlet). You're just splicing the roto fab res into the bottom hose on the supercharger.

BeardWS6 · 11-17-2015, 01:30 AM

Thanks fellas!

BeardWS6 · 11-17-2015, 01:40 AM

Quote:

Originally Posted by 97ChameleonTA

What he said, easy peasy.

So getting Dex-cool 50/50 and water wetter will mix okay together? I`m reading up and it says the Dex-cool doesn`t like to be mixed with anything other than water. Just checking before I get it tomorrow!

Thanks for the info fellas on install, Nice!

jayno20 · 11-17-2015, 09:30 AM

Quote:

Originally Posted by BeardWS6

So getting Dex-cool 50/50 and water wetter will mix okay together? I`m reading up and it says the Dex-cool doesn`t like to be mixed with anything other than water. Just checking before I get it tomorrow!

Thanks for the info fellas on install, Nice!

I personally wouldn't mix anything with the dex cool. If you are in a warm climate just run pure distilled water with the water wetter.

11-13-2015, 12:05 PM	#1
BeardWS6 Drives: 01 WS6 Join Date: Jun 2009 Location: Texas Posts: 263	Ordered Roto-Fab Reservoir Parts needed? I ordered the reservoir and she said I would need to get a Napa 9820 hose. Is their anything else I would need to get to finish the install? When filling the reservoir I get Dexcool and a water mix. What is the mixture percentage and anything else I need to do? Any install issues I would run into and how did you guys run the hoses? Thanks! __________________ 2013 Red ZL1 Auto modded 2015 C7 ZO6 Luguna Blue stock

11-13-2015, 11:08 PM	#5
BeardWS6 Drives: 01 WS6 Join Date: Jun 2009 Location: Texas Posts: 263	Thanks! __________________ 2013 Red ZL1 Auto modded 2015 C7 ZO6 Luguna Blue stock

11-15-2015, 01:54 PM	#6
BeardWS6 Drives: 01 WS6 Join Date: Jun 2009 Location: Texas Posts: 263	How much water wetter do I add? __________________ 2013 Red ZL1 Auto modded 2015 C7 ZO6 Luguna Blue stock

11-16-2015, 09:06 PM	#8
BeardWS6 Drives: 01 WS6 Join Date: Jun 2009 Location: Texas Posts: 263	How do I know which hose connects to the reservoir from the blower, then the reservoir to the pump? __________________ 2013 Red ZL1 Auto modded 2015 C7 ZO6 Luguna Blue stock

11-17-2015, 01:30 AM	#10
BeardWS6 Drives: 01 WS6 Join Date: Jun 2009 Location: Texas Posts: 263	Thanks fellas! __________________ 2013 Red ZL1 Auto modded 2015 C7 ZO6 Luguna Blue stock

11-13-2015, 01:26 PM	#2
Travis104 Drives: 2014 ZL1 Join Date: Sep 2012 Location: West Virginia Posts: 591	If you have a CAI brand intake, you will need the offset stud that rotofab sells for about $4. A lot of people put wetter water in to help cool things a little more.

11-15-2015, 02:28 PM	#7
jayno20 Go fast, please. Drives: 2019 Corvette ZR1 Join Date: May 2014 Location: Pittsburgh, PA Posts: 2,471 View My Garage	The back of the bottle should tell you everything you need to know...

11-16-2015, 09:21 PM	#9
Harley01 Drives: 2015 Camaro ZL1 (red hot) Join Date: Dec 2014 Location: Troy, Idaho Posts: 91	The bottom port on the supercharger goes to the top of the roto fab res (inlet). The supercharger pump hooks to the bottom of the roto fab res (outlet). You're just splicing the roto fab res into the bottom hose on the supercharger.