10-12-2016, 01:02 AM | #1 |
Drives: 2010 2SS/RS M6 Join Date: Oct 2010
Location: Charlotte, NC
Posts: 637
|
Lots Of Aftermarket Parts For Sale
Parted out my 2010 Camaro 2SS/RS M6.
Prices are for local pickup, shipping costs is covered by the buyer. Please PM for fastest response. IVS Havoc Rear Diffuser $375 ***SOLD*** Anvil Gloss Carbon Fiber Notch Rear Spoiler $300 ***SOLD*** Stainless Works Long Tube Headers with High Flow Cats $700 ***SOLD*** Stainless Work Retro Chambered Cat Back Exhaust $600 ***SOLD*** Magnuson MP2300 TVS Supercharger with Rear Cog Drive, 3.4" 6 rib pulley, RDS Supercharger Plate, and Cog Drive modified Fuel Rail $4000 Magnuson 3.6" 6 rib pulley $40 ZR1 3 Bar MAP Sensor $20 JRE Super Tensioner $200 Camaro ZL1 Fuel Pump $175 ADM FPCM $125 Injector Dynamics 850cc Fuel Injectors $500 (See Supercharger picture) RX Catch Can and Oil Breather $50 ***SOLD*** Cold Air Inductions Cold Air Intake (Supercharger elbow) $225 ADM Air Scoop $50 ***SOLD*** Showstoppers Side Markers (Rally Yellow) $175 VMAX Ported Throttle Body $175 ***SOLD*** Technostalgia Tail Lights $300 ***SOLD*** SJM Line Lock Kit with Switch Link $100 ***SOLD*** The Driveshaft Shop 1 Piece Aluminum Driveshaft (Manual) $550 ***SOLD*** Lingenfelter Clutch Pedal Return Kit $55 ***SOLD*** S U B T H U M P Factory Amp Mount Location $15 ***SOLD*** S U B T H U M P Factory Amp Replacement Kit $100 ***SOLD*** S U B T H U M P Drivers Side 10" Sub Box $100 SLP SS Front Landing Pad $35 ***SOLD*** Trunk Cargo Net $15 ***SOLD*** MyLink Non NAV with Heated Seats Faceplate $150 MyLink Non NAV Radio $100 LSR Floor Pan Brace $60 ***SOLD*** AAC Reverse Lights $100
__________________
Build Journal
http://www.camaro5.com/forums/showthread.php?t=332853 Magnuson TVS2300 with 3.4" Pulley, 1:1 Cog Drive, and RDS Spacer 2" Stainless Works Headers / Cat Delete / 3" Stainless Works Retro Chambered Catback Cold Air Inductions Intake with ADM Scoop ID 850 ZL1 Fuel Pump ADM FPCM VMAX Ported Throttle Body DSS 1 Piece Aluminum Driveshaft JRE 93 Octane Tuned Last edited by cody.freeman1; 12-07-2016 at 11:26 PM. |
10-13-2016, 08:39 AM | #2 |
How many miles on the injectors?
|
|
10-13-2016, 10:07 AM | #3 |
Drives: 2010 2SS/RS M6 Join Date: Oct 2010
Location: Charlotte, NC
Posts: 637
|
10,000 miles
__________________
Build Journal
http://www.camaro5.com/forums/showthread.php?t=332853 Magnuson TVS2300 with 3.4" Pulley, 1:1 Cog Drive, and RDS Spacer 2" Stainless Works Headers / Cat Delete / 3" Stainless Works Retro Chambered Catback Cold Air Inductions Intake with ADM Scoop ID 850 ZL1 Fuel Pump ADM FPCM VMAX Ported Throttle Body DSS 1 Piece Aluminum Driveshaft JRE 93 Octane Tuned |
10-13-2016, 12:30 PM | #4 |
Drives: 2011 ported tvs2300 e98 Join Date: Oct 2016
Location: Louisana
Posts: 39
|
any interest in separating the cog drive from the blower?
|
10-13-2016, 11:04 PM | #5 |
ace5.org
|
Want the Spoiler sent you a PM
__________________
Stock...For Now.
|
10-14-2016, 10:06 AM | #6 |
Drives: 2010 Camaro 2SS/RS L99 Join Date: Apr 2011
Location: Royse City Tx.
Posts: 597
|
Interested in the Havoc diffuser but I can't really tell how the condition of it is, any other pictures of it, is it scratched or gouged anywhere?
__________________
375RWHP/399RWTQ |
10-14-2016, 12:33 PM | #7 |
Drives: 2010 2SS/RS M6 Join Date: Oct 2010
Location: Charlotte, NC
Posts: 637
|
Post updated
__________________
Build Journal
http://www.camaro5.com/forums/showthread.php?t=332853 Magnuson TVS2300 with 3.4" Pulley, 1:1 Cog Drive, and RDS Spacer 2" Stainless Works Headers / Cat Delete / 3" Stainless Works Retro Chambered Catback Cold Air Inductions Intake with ADM Scoop ID 850 ZL1 Fuel Pump ADM FPCM VMAX Ported Throttle Body DSS 1 Piece Aluminum Driveshaft JRE 93 Octane Tuned |
10-18-2016, 11:47 PM | #8 |
Drives: 2010 2SS/RS M6 Join Date: Oct 2010
Location: Charlotte, NC
Posts: 637
|
bump
__________________
Build Journal
http://www.camaro5.com/forums/showthread.php?t=332853 Magnuson TVS2300 with 3.4" Pulley, 1:1 Cog Drive, and RDS Spacer 2" Stainless Works Headers / Cat Delete / 3" Stainless Works Retro Chambered Catback Cold Air Inductions Intake with ADM Scoop ID 850 ZL1 Fuel Pump ADM FPCM VMAX Ported Throttle Body DSS 1 Piece Aluminum Driveshaft JRE 93 Octane Tuned |
10-22-2016, 11:25 AM | #9 |
Drives: 2010 2SS/RS M6 Join Date: Oct 2010
Location: Charlotte, NC
Posts: 637
|
Bump
__________________
Build Journal
http://www.camaro5.com/forums/showthread.php?t=332853 Magnuson TVS2300 with 3.4" Pulley, 1:1 Cog Drive, and RDS Spacer 2" Stainless Works Headers / Cat Delete / 3" Stainless Works Retro Chambered Catback Cold Air Inductions Intake with ADM Scoop ID 850 ZL1 Fuel Pump ADM FPCM VMAX Ported Throttle Body DSS 1 Piece Aluminum Driveshaft JRE 93 Octane Tuned |
10-26-2016, 09:09 PM | #10 |
Drives: 2010 2SS/RS M6 Join Date: Oct 2010
Location: Charlotte, NC
Posts: 637
|
bump
__________________
Build Journal
http://www.camaro5.com/forums/showthread.php?t=332853 Magnuson TVS2300 with 3.4" Pulley, 1:1 Cog Drive, and RDS Spacer 2" Stainless Works Headers / Cat Delete / 3" Stainless Works Retro Chambered Catback Cold Air Inductions Intake with ADM Scoop ID 850 ZL1 Fuel Pump ADM FPCM VMAX Ported Throttle Body DSS 1 Piece Aluminum Driveshaft JRE 93 Octane Tuned |
10-30-2016, 05:52 PM | #11 |
Drives: 2010 2SS/RS M6 Join Date: Oct 2010
Location: Charlotte, NC
Posts: 637
|
bump
__________________
Build Journal
http://www.camaro5.com/forums/showthread.php?t=332853 Magnuson TVS2300 with 3.4" Pulley, 1:1 Cog Drive, and RDS Spacer 2" Stainless Works Headers / Cat Delete / 3" Stainless Works Retro Chambered Catback Cold Air Inductions Intake with ADM Scoop ID 850 ZL1 Fuel Pump ADM FPCM VMAX Ported Throttle Body DSS 1 Piece Aluminum Driveshaft JRE 93 Octane Tuned |
11-03-2016, 12:40 PM | #12 |
Drives: 2010 2SS/RS M6 Join Date: Oct 2010
Location: Charlotte, NC
Posts: 637
|
bump
__________________
Build Journal
http://www.camaro5.com/forums/showthread.php?t=332853 Magnuson TVS2300 with 3.4" Pulley, 1:1 Cog Drive, and RDS Spacer 2" Stainless Works Headers / Cat Delete / 3" Stainless Works Retro Chambered Catback Cold Air Inductions Intake with ADM Scoop ID 850 ZL1 Fuel Pump ADM FPCM VMAX Ported Throttle Body DSS 1 Piece Aluminum Driveshaft JRE 93 Octane Tuned |
11-07-2016, 08:51 PM | #13 |
|
Does the zl1 pump and ask module come compete with everything to make it work?
__________________
Update...Build in process, Forged Rods, Pistons and rings, Johnson Lifters, NOVI1500 ECS SC, 13lb boost or more, LS3 Conversion 114/228/241 COMP CAM, Frostbite 4 row Aluminum radiator, 6L80 built, Circle D 6L80 PRO SERIES MULTI 258MM 2D, Stock 3.45 gears, 1-7/8 American Racing Headers w/HF cat, X-Pipe, Lingenfelter dual fuel pump, E-85 flex sensor, ATI super damper pulley, Ported TB, 160 therm, Trans cooler, Pedder's sways/end links/sub frame bushings, BMR trailing arms & toe rods, Coil overs. HP/TQ pending
|
11-10-2016, 08:20 AM | #14 |
Drives: 2010 2SS/RS M6 Join Date: Oct 2010
Location: Charlotte, NC
Posts: 637
|
Yes other than you will need a retune
__________________
Build Journal
http://www.camaro5.com/forums/showthread.php?t=332853 Magnuson TVS2300 with 3.4" Pulley, 1:1 Cog Drive, and RDS Spacer 2" Stainless Works Headers / Cat Delete / 3" Stainless Works Retro Chambered Catback Cold Air Inductions Intake with ADM Scoop ID 850 ZL1 Fuel Pump ADM FPCM VMAX Ported Throttle Body DSS 1 Piece Aluminum Driveshaft JRE 93 Octane Tuned |
|
|
|
|