05-07-2011, 06:03 PM | #1 |
Drives: 2010 Camaro CGM 2SS/RS Join Date: Aug 2009
Location: US
Posts: 136
|
New Havoc Diffuser/Rockers and Stillen Splitter
I just finished installing Havoc side skirts and rear diffuser... Also replaced my ACS splitter with the Stillen splitter. I prefer the design of the ACS, but it hangs very low and has taken quite a beating over the last year. I have needed to remove it for repaint and repairs a couple different times and decided a urethane splitter would handle the terrible roads much better.
I painted the Havoc pieces matte black and left the Stillen splitter as bare urethane since it seemed to match quite nicely. The install was very simple, but I would recommend replacing the supplied tape that comes with these kits with something thicker. I also added a pic of the KB 2.8 that was installed and dyno tuned by TPE.
__________________
Kenne Bell 2.8 Polished & Black - Coolingmist Methanol Injection Stillen Front Splitter - Havoc Side Skirts & Rear Diffuser ICONZ Wheels & Nitto NT-05's - PFADT Springs |
05-07-2011, 06:20 PM | #2 |
Drives: C7 / ZL1 / SS / trucsk Join Date: Nov 2009
Location: G4 CLASSIFIED
Posts: 4,533
|
Very nice, perfect combo of mods
Post a video, so we can hear it purr...............
__________________
2014 C7 Stingray 3LT/Z51
2013 Camaro SS 2012 Camaro ZL1 - 850 HP 2015 GMC Denali 3500HD 4x4 2012 GMC Sierra 3500HD 4x4 |
05-07-2011, 07:17 PM | #3 |
Drives: 2010 Camaro CGM 2SS/RS Join Date: Aug 2009
Location: US
Posts: 136
|
On the dyno at TPE
__________________
Kenne Bell 2.8 Polished & Black - Coolingmist Methanol Injection Stillen Front Splitter - Havoc Side Skirts & Rear Diffuser ICONZ Wheels & Nitto NT-05's - PFADT Springs |
05-07-2011, 07:19 PM | #4 |
Drives: C7 / ZL1 / SS / trucsk Join Date: Nov 2009
Location: G4 CLASSIFIED
Posts: 4,533
|
So it growls instead of purrs..................
Have ya run the 1/4 mile with it, yet? time?
__________________
2014 C7 Stingray 3LT/Z51
2013 Camaro SS 2012 Camaro ZL1 - 850 HP 2015 GMC Denali 3500HD 4x4 2012 GMC Sierra 3500HD 4x4 |
05-07-2011, 07:27 PM | #5 | |
Drives: 2010 Camaro CGM 2SS/RS Join Date: Aug 2009
Location: US
Posts: 136
|
Quote:
No 1/4 mile runs yet... I'm more interested in getting on the 2.5 mile road course that is just a few hours away.
__________________
Kenne Bell 2.8 Polished & Black - Coolingmist Methanol Injection Stillen Front Splitter - Havoc Side Skirts & Rear Diffuser ICONZ Wheels & Nitto NT-05's - PFADT Springs |
|
05-07-2011, 07:40 PM | #6 |
Drives: 2013 Hot Wheels Special Edition Join Date: May 2009
Location: Auburn,Mass
Posts: 1,333
|
Sounds and looks good man
|
05-07-2011, 08:08 PM | #7 |
Its all about the U
Drives: 2010 SGM Join Date: Mar 2010
Location: Miami
Posts: 1,671
|
Looks great more pics of the rear diff would be appreciated..
__________________
|
05-07-2011, 08:09 PM | #8 |
Would you kindly...
Drives: Destitute Join Date: Aug 2010
Location: Clovis CA
Posts: 748
|
Your Camaro looks wicked! Loving the setup.
__________________
|
05-07-2011, 08:25 PM | #9 |
Drives: RS (11/15/10) Join Date: Mar 2010
Location: Baton Rouge,LA
Posts: 574
|
I like what you did , I plan on having the same splitter and diffuser Down the road .
Also like the blue SS badge
__________________
TEAM LLT
Nov.15th 2010 -- Check out my build thread http://www.camaro5.com/forums/showthread.php?t=116235 |
05-08-2011, 08:21 PM | #10 | |
Drives: 2010 Camaro CGM 2SS/RS Join Date: Aug 2009
Location: US
Posts: 136
|
Quote:
__________________
Kenne Bell 2.8 Polished & Black - Coolingmist Methanol Injection Stillen Front Splitter - Havoc Side Skirts & Rear Diffuser ICONZ Wheels & Nitto NT-05's - PFADT Springs |
|
05-08-2011, 08:39 PM | #11 |
COTW: 12/13/10
Drives: 1969 Camaro Join Date: Feb 2008
Location: Orange County, CA
Posts: 7,880
|
Thanks for posting this! I am going to do the havok side skirts and stillen carbon fiber splitter soon. Looks good!
__________________
"Are you one of those boys who prefer cars to women? - I'm one of those boys that appreciates a fine body, regardless of the make." 1969 CAMARO JOURNAL: http://www.camaro5.com/forums/showthread.php?t=341239 | FACEBOOK: http://www.facebook.com/taylor.ryan.apt | GRAPHIC DESIGN: www.aptdesigns.net |
05-08-2011, 09:44 PM | #12 |
50th Anniversary Vert
|
Nice set up - I have the exact setup except I still have the ACS splitter (which I had repaired a few weeks back).
Hoping to replace mine with either the SLP or Rev splitter.
__________________
|
05-08-2011, 10:27 PM | #13 |
Drives: 2010 Camaro CGM 2SS/RS Join Date: Aug 2009
Location: US
Posts: 136
|
I would have the SLP splitter if they would sell it to me :(
__________________
Kenne Bell 2.8 Polished & Black - Coolingmist Methanol Injection Stillen Front Splitter - Havoc Side Skirts & Rear Diffuser ICONZ Wheels & Nitto NT-05's - PFADT Springs |
05-08-2011, 10:33 PM | #14 |
Drives: 2011 Camaro SS/RS Cyber Grey Join Date: Oct 2009
Location: Dallas, Texas
Posts: 500
|
love this camaro
__________________
"............don't lose sight of the fact that the Mustang is not only Ford's "Camaro" - it's also their "Corvette". "-FbodFather
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Stillen front splitter V6 | rtcat600man | Cosmetics and Lighting Modification Discussions | 17 | 11-13-2015 07:14 AM |
STILLEN Splitter & Spoiler installed, Blacked out | Demon Hunter | Camaro Photos | Spyshots | Video | Media Gallery | 33 | 01-19-2011 04:28 PM |
Installed the V6 Stillen splitter too! | LosingReality | Cosmetics and Lighting Modification Discussions | 29 | 09-21-2010 11:52 AM |
V6 Stillen Splitter | jagan323 | Cosmetics and Lighting Modification Discussions | 27 | 08-20-2010 03:08 PM |
Camaro Front Splitter from STILLEN | linkwpc | USA - California | 11 | 03-15-2010 08:24 AM |