06-09-2015, 12:21 AM | #15 |
Drives: 2010 2SS/RS LS3 A6 IOM Join Date: May 2013
Location: Arizona
Posts: 1,190
|
BMR hooked up with WELD wheels, so I went with TCA028 LCAs for the Weld 17"×10" RT-S rears and TR004R for the toe rods.
|
06-09-2015, 09:39 AM | #16 |
Drives: 2000 Camaro SS Join Date: Feb 2010
Location: Louisville, Ky.
Posts: 25,179
|
Personally, I prefer BMR. I was a very satisfied BMR customer for about a decade before working for a company that was a distributor.
|
08-12-2016, 09:58 AM | #17 |
400HP used to be enough..
Drives: 2010 2SS rs manual Join Date: Aug 2009
Location: Central NC
Posts: 772
|
I just received my Rear toe links from Spohn, C10-605-4130R and they don't fit. The sleeves the factory bolts go through are wrong. The inside diameter is too small. You would think that they would know what fits this car by now.
__________________
Build thread: http://www.camaro5.com/forums/showthread.php?t=47925
|
08-12-2016, 10:08 AM | #18 |
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,174
|
What you have in hand are G8 toe links. They are the same length, but the 5th Gen uses a larger bolt than the G8.
|
08-12-2016, 10:18 AM | #19 |
400HP used to be enough..
Drives: 2010 2SS rs manual Join Date: Aug 2009
Location: Central NC
Posts: 772
|
Figures. They list them as the same part number. I should have known better after the problems I had with the rear trailing arms I bought from them. I had the modify them to clear the wider wheels. The sleeves on the toe links are .5100 ID and the bolt is .5450. They are sending the correct sleeves... maybe.
__________________
Build thread: http://www.camaro5.com/forums/showthread.php?t=47925
|
08-12-2016, 11:01 AM | #20 |
Drives: 2010 Camaro 2SS/RS Join Date: Oct 2014
Location: Redmond, WA
Posts: 239
|
I have all BMR gear under my Camaro and no complaints. Great fit, great customer service and the car is better on and off the track.
Scott
__________________
"The Beast" 2010 Camaro SS/RS LS3
Diablo T1000 with Phastek custom tune, K&N Intake, Hurst Short-Throw Shifter, Flowmaster, Outlaw II Exhaust, BMR 1" Lowering Springs, BMR 3-way Adjustable Anti-Roll Bars, BMR End Links and Reinforcement Brackets, BMR Trailing Arms, ZL1 wheels, Nitto NT555 G2 Tires, Z28-style Rear Spoiler, Hawk Plus Brake Pads, Motul RBF600 Brake Fluid |
08-12-2016, 05:15 PM | #21 |
BMR all the way! Stay away from spohon.
|
|
08-15-2016, 04:49 PM | #22 | |
|
Quote:
__________________
'11 IBM 2SS/RS Built and Tuned by Vengeance Racing Vengeance PCM
Vengeance Racing Mast Black Label LS7 Headed 416 ProCharger Stage II D1X Race ,Monster Triple,Alky Control Meth Inj, Forgestar F14 Drag Version and a bunch of other blah blah blah.838/688 at 12lbs Street Friendly |
|
|
|
|
|