04-26-2018, 06:33 PM | #1 |
Drives: 2015 Camaro 2SS Join Date: Sep 2017
Location: California
Posts: 65
|
HID swap on 2015 2ss relay harness
I bought HID kits for my 2ss non rs.
I got 55w ballasts for the lows, highs, and fogs I also got power relay harnesses for all of them, problem is the battery in the ss is in the trunk... Any ideas on how to wire these harnesses to a positive and negative without running six of these cables to the trunk? link to what i bought: https://www.xenonhids.com/low-beam-h...t.html?i=78Kzz EDIT: I found this post: https://www.camaro5.com/forums/showthread.php?t=86838 seems that there is an always on 12v by the fuse box, seems this should work. Last edited by muffins4all; 04-26-2018 at 08:08 PM. |
04-27-2018, 03:18 AM | #2 |
Drives: 2013 camaro Join Date: Mar 2013
Location: Colorado
Posts: 607
|
Yes hook the power to the positive pole in the engine bay. It screws off to allow a connection from a harness or other source. Then not to far to the right is a another bar similar for the ground connection. PM me if you need pics of locations. I also installed HIDs and did the same method as you.
|
04-27-2018, 10:18 AM | #3 |
Drives: 2015 Camaro 2SS Join Date: Sep 2017
Location: California
Posts: 65
|
Yep I found that negative pole shortly after, it's all wired up and working great. Thanks for your input.
|
|
|
|
|