315 front tires, what would it take to make them fit? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

nl12 · 01-23-2011, 10:08 PM

315 front tires, what would it take to make them fit? I would like to be able to run 315 width all around. Specifically stock height 315 tires, I understand pedders runs 315s but in a shorter tire.

bkscott · 01-23-2011, 10:53 PM

Pedders is using 305's on a 19 inch wheel. I doubt 315 / 20's will fit.

rolnslo · 01-24-2011, 01:10 PM

You could make it fit, but only with the perfect offset. From what I remember about the Pedders setup, they worked directly with the wheel manufacturer to come up with an absolutely perfect offset for their setup. Keep in mind, they aren't running stock suspension components either.

Nine Ball · 01-24-2011, 01:41 PM

Fender flares. At least 1.6 inches wider on each side.

285 fits under the fender with stock springs and lowering springs, as well as Pedders coil-overs.

KW, Pfadt, BC coil-overs have less room than factory, those fit tight with just 275 tires up front and the perfect offset.

305, 315, etc... will stick out. The Pedders Camaro is a track test car, the front tires do stick out. At the track, this doesn't matter though.

nl12 · 01-25-2011, 07:54 AM

Fender flares would be cool, I'm trying to envision the car with wider fenders. I wouldnt mind getting some metal work done but I would want them to fit up with the stock front facia.

LC · 01-25-2011, 08:37 AM

I ALMOST fitted a rear 22x11 with a 315/25 on the front ( COR offset )

As soon as some things arrive I will be trying 305 fronts...

GHOSTRIDER-R · 04-11-2016, 07:28 PM

Need answer has anyone done this? Will I be the first I just ordered 315/35r20 for all 4 corners

mp51998 · 04-12-2016, 04:53 AM

Talk to Pete at JPSS. He has at least two cars running 315's on all four corners.

01-23-2011, 10:08 PM	#1
nl12 Drives: Unicycle Join Date: Oct 2009 Location: Monterey California ---> Virginia Posts: 226	315 front tires, what would it take to make them fit? 315 front tires, what would it take to make them fit? I would like to be able to run 315 width all around. Specifically stock height 315 tires, I understand pedders runs 315s but in a shorter tire.

01-23-2011, 10:53 PM	#2
bkscott Drives: 2010 Camaro 2SS/RS Join Date: Dec 2009 Location: Grand Prairie, Texas Posts: 1,608 View My Garage	Pedders is using 305's on a 19 inch wheel. I doubt 315 / 20's will fit. __________________ 94 Firebird Formula (Drowned 08/30/05) 2010 IBM 2SS/RS 6M Arrived 3/25/10. ADM CAI, Borla Type S Cat Back, VMAX Ported TB, LG Short Throw Shifter, 1LE Shocks, Hotchkis Sway Bars, Whiteline Cradle Bushing Inserts, Custom Powdercoated ZL1's ,Michelin Pilot Supersports, Stainless Power Headers, Solo J Pipes, AAC LED Sidemarkers, ZL1 Rockers, SLP Splitter, ADM Stage II Cam,ZL1 Diffuser,Vitesse Throttle Controller.

01-24-2011, 01:10 PM	#3
rolnslo Rolling along... Drives: 2011 2SS/RS SGM Join Date: Mar 2008 Location: Houston, TX Posts: 4,380 View My Garage	You could make it fit, but only with the perfect offset. From what I remember about the Pedders setup, they worked directly with the wheel manufacturer to come up with an absolutely perfect offset for their setup. Keep in mind, they aren't running stock suspension components either. __________________ 2011 2SS/RS Synergy Green A6

01-24-2011, 01:41 PM	#4
Nine Ball Drives: 1969 & 2016 Camaro SS Join Date: Oct 2008 Location: Houston, TX Posts: 3,849	Fender flares. At least 1.6 inches wider on each side. 285 fits under the fender with stock springs and lowering springs, as well as Pedders coil-overs. KW, Pfadt, BC coil-overs have less room than factory, those fit tight with just 275 tires up front and the perfect offset. 305, 315, etc... will stick out. The Pedders Camaro is a track test car, the front tires do stick out. At the track, this doesn't matter though. __________________ Fquick.com/NineBall

01-25-2011, 08:37 AM	#6
LC ou mai gad Drives: SW 2SS x2 Join Date: Feb 2010 Location: MX Posts: 643	I ALMOST fitted a rear 22x11 with a 315/25 on the front ( COR offset ) As soon as some things arrive I will be trying 305 fronts... __________________

01-25-2011, 07:54 AM	#5
nl12 Drives: Unicycle Join Date: Oct 2009 Location: Monterey California ---> Virginia Posts: 226	Fender flares would be cool, I'm trying to envision the car with wider fenders. I wouldnt mind getting some metal work done but I would want them to fit up with the stock front facia.

04-11-2016, 07:28 PM	#7
GHOSTRIDER-R Drives: 2013 1SS, RS, Roof, Black on Black Join Date: Feb 2014 Location: Philadelphia Posts: 123	Need answer has anyone done this? Will I be the first I just ordered 315/35r20 for all 4 corners

04-12-2016, 04:53 AM	#8
mp51998 Drives: Black 2011 2SS/RS Join Date: May 2011 Location: S. Texas Posts: 1,817	Talk to Pete at JPSS. He has at least two cars running 315's on all four corners.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
5th Gen Suspension -- The Book	JusticePete	Suspension / Brakes / Chassis	151	05-07-2015 05:52 PM
315 tires	mbmike18	Wheels and Tires Talk Sponsored by The Tire Rack	9	11-08-2010 02:41 AM
Recommendation for Skinny Front Tires	Camcam16	Dragstrip and Launch Techniques Discussion	2	06-03-2010 06:54 PM
Pedders Suspension Benchmark Track Testing and New Jersey Track Day	Info@PeddersUSA.com	USA - NY / NJ / PA	35	10-26-2009 05:20 PM
No confirmation number?	jamesc1123	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	12	02-21-2009 08:49 PM