02-20-2015, 02:19 AM | #197 |
Drives: 2015 SS2 1LE Join Date: Dec 2014
Location: Northern WI
Posts: 6
|
2 JL 10w7's
|
02-21-2015, 04:31 PM | #198 |
Do somethin fun every day
|
My setup is here:
BA w/ Polk Sub & Alpine amp
__________________
Last edited by djcfuzz; 03-28-2015 at 04:00 PM. Reason: Updated with pic |
03-05-2015, 05:12 PM | #199 |
Drives: 2010 IOM Camaro Join Date: Aug 2012
Location: DFW
Posts: 3,112
|
|
03-05-2015, 11:00 PM | #200 |
Drives: 2010 camaro Join Date: Aug 2009
Location: port st lucie ,florida
Posts: 4,273
|
batteries are on both sides, one for starting car, other for audio..remove nos tanks and side panels pop out..about a 1 hr job...we also fixed the trunk lid issue..as somewhere down the road, the electronic popper may 1 day not work and there would be no way to get into trunk..and can,t climb thru sub box..went to a buddie who had a bunch of old file cabinets, took a couple different locks out of the file drawers that had matching keys...then measured out the hole in the file cabinet for the lock ..drilled out the lid at the center of the bowtie emblem, that I had removed..tweaked out the lock mechanism to work the trunk latch internally, after multiple attempts, had the key working smoothly to pop the trunk..after we got the key mounted in trunk, we hollowed out the inside of the center of the bowtie emblem so that the emblem could sit flush to trunk lid...then bought some super duty small circular magnets and glued them into small circular holes drilled around the inside edge of emblem..{ 8 magnets I believe}..snaps right into place and you have no idea there is now a key luck under magnetic emblem..now I can open trunk without any issues or battery power needed
__________________
|
03-30-2015, 11:35 AM | #201 |
Keeper of the Gold Acorn
Drives: 2011 2SS/RS Join Date: Aug 2012
Location: Houston
Posts: 177
|
Nice and Tidy.
__________________
2011 RJT 2SS/RS - Kooks 1-7/8 Long Tubes, High Flow Cats, Corsa Cat Back Exhaust, MTI Short Throw Shifter, Vmax Ported Throttle Body, Fasster Billet Fuel Rails & Custom Braided Vapor and Fuel Lines, CAI Cold Air Intake, RX Catch Can, Nitto Invos, Hawk HPS, BMR Trailing Arms, 2x Zapco ST4x-SQ amps, ST850x-II Sub amp, Morel Tempo 6 componenets, Morel Maximo 6x9, Morel 124 Primo Sub, Zapco DSP8Z Processor... More to Come.
|
04-09-2015, 02:07 PM | #202 |
Drives: 2014 SS 1LE Join Date: Apr 2015
Location: Orlando
Posts: 5
|
Not quite done yet, but here's the build so far. The box and trim panel were originally built by NBA Stereos in Washington for a friend's Camaro, but I didn't like the way it mounted to the deck so I came up with my own solution. I'm debating building some 1/2" plexi trim rings to put between the amp and trim panel and edge lighting with 5050 rgb led strips to make it pop a bit more.
Two Audiomobile GTS 2112 12" subs in custom downfiring box Exile Audio XM12.1 amp - 1200 watts rms Exile Audio XM15.4 amp - 150 x 4 rms Arc Audio Arc series 6.2 components Arc Audio Arc series 602 coaxials Audio Control LCQ-1 processor with stock MyLink deck |
04-09-2015, 02:22 PM | #203 |
Drives: 2017 ZL1 M6 Join Date: Mar 2014
Location: Dallas
Posts: 203
|
|
04-10-2015, 08:57 AM | #204 | |
Drives: 2020 2SS SGM - Stock for now Join Date: Aug 2013
Location: Mississippi
Posts: 197
|
Quote:
How is that Audio Control processor? I haven't really dealt with processors. I usually go aftermarket h/u & a separate EQ but I like the MyLink screen so I don't want to get rid of it but the signal is not what I'm used to. Sent from my iPhone using Tapatalk |
|
04-10-2015, 05:06 PM | #205 |
Drives: 2014 SS 1LE Join Date: Apr 2015
Location: Orlando
Posts: 5
|
It's ok, nothing special but it gets the job done. I run the same model in my Tacoma because I wanted to keep the factory head unit. The biggest complaint with them is there's usually a little bit of hiss that you can hear with the sound off... not a big deal to me. There are other processors out there that are way better but so far it seems ok. In the past I've always run aftermarket decks also so this is my first venture into processors; don't take what I say as gospel since this could be a pile of shit compared to the more expensive ones and I'd have no idea
|
04-10-2015, 05:11 PM | #206 | |
Drives: 2014 SS 1LE Join Date: Apr 2015
Location: Orlando
Posts: 5
|
Quote:
|
|
04-10-2015, 08:40 PM | #207 | |
Quote:
|
||
04-11-2015, 05:30 AM | #208 | |
Drives: 2012 2SS/RS Auto Convertible Join Date: Jun 2014
Location: Florida and New York
Posts: 110
|
Quote:
Sent from my SAMSUNG-SM-G925A using Tapatalk |
|
04-12-2015, 07:43 PM | #209 | |
Drives: 2014 SS 1LE Join Date: Apr 2015
Location: Orlando
Posts: 5
|
Quote:
|
|
04-13-2015, 12:33 PM | #210 |
Drives: 2014 2SS RS Coupe Join Date: Aug 2013
Location: Phoenix
Posts: 1,454
|
When I had a hiss I fixed it by loosening the bolt under the door handle on the passenger side, weird AF! I know, but it fixed the whole speaker system hum!
__________________
|
|
|
Tags |
camaro, subs |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Woodbury, CT Car Show Sun June 5th | WoodburyMan | USA - New England | 4 | 05-24-2011 09:12 AM |
Chevy Street Cruise to open Super Chevy Show Weekend in Houston | Houston Raceway | USA - Texas | 0 | 08-08-2010 08:11 AM |
The 2010 Pacific Coast Dream Machines Show | Mindz | USA - California | 4 | 04-13-2010 08:41 PM |
Consensus Feb 6th Plus lots of other key dates | UCF w00t | 5th Gen Camaro SS LS LT General Discussions | 16 | 01-22-2009 11:39 PM |
Global auto show scene in transition | KILLER74Z28 | General Automotive + Other Cars Discussion | 0 | 09-08-2006 04:40 PM |