09-20-2019, 07:36 PM | #15 |
Drives: 2010 Camaro 2SS/RS M6 Join Date: May 2009
Location: Idaho
Posts: 726
|
The shaft I am beating on is garbage, so no worries there. What bothers me is the force is presumablybeing transferred to the side gear. thru that c-clip. I have have hit it as hard as I can in the limited space there is to swing the hammer and I haven't got it to release yet. This bastard might never come out. Even if I take the diff completely out and remove the cover,there is no way to access the c-clip. I'm feeling really screwed right now. I'm not having any luck coming up with any other ideas.
__________________
GPI SS2; EE E2 catch can; SP 1 7/8" LT Headers w/ hfc; FM AT 3" cat-back; CAI Cold Air Intake; AEM Wideband
Tuned by GPI McCleod RXT; MGW flat stick; Ram Clutch slave cylinder & hydraulic adjuster BMR cradle & diff bushings, trailing arms, toe rods & upper control arm bushings Hotchkis sub-frame brace Stop Tech Z-23 brakes 4.10 gears, Eaton Truetrac, LPW diff cover Best 1/4 mile 12.073 @ 115.68 mph 3,300 ft DA |
09-21-2019, 03:14 AM | #16 |
|
Use a punch and knock it out from the other side. That's why you can see a hole from one axle location into the other side.
__________________
MODS 6.0 forged iron block, TH400, B&M shifter, DSS axles & driveshaft, Viking / BMR suspension, Full custom fuel system with cell, Twin 76mm teriyaki tornados on 24lbs.
https://www.instagram.com/whoopa_ss/ |
09-21-2019, 07:39 AM | #17 |
Drives: 2010 Camaro 2SS/RS M6 Join Date: May 2009
Location: Idaho
Posts: 726
|
Yes, that is what I have been doing. I might not have been clear in my earlier posts, but I have tried several different punches and hammers, up to a BFH. I am hitting the end of the shaft, but it won't pop out.
__________________
GPI SS2; EE E2 catch can; SP 1 7/8" LT Headers w/ hfc; FM AT 3" cat-back; CAI Cold Air Intake; AEM Wideband
Tuned by GPI McCleod RXT; MGW flat stick; Ram Clutch slave cylinder & hydraulic adjuster BMR cradle & diff bushings, trailing arms, toe rods & upper control arm bushings Hotchkis sub-frame brace Stop Tech Z-23 brakes 4.10 gears, Eaton Truetrac, LPW diff cover Best 1/4 mile 12.073 @ 115.68 mph 3,300 ft DA |
09-21-2019, 01:06 PM | #18 | |
|
Quote:
The diff isn't held in by much. 6 bolts. Pull it out and put it on a bench.
__________________
MODS 6.0 forged iron block, TH400, B&M shifter, DSS axles & driveshaft, Viking / BMR suspension, Full custom fuel system with cell, Twin 76mm teriyaki tornados on 24lbs.
https://www.instagram.com/whoopa_ss/ |
|
09-21-2019, 02:35 PM | #19 |
Drives: 2SS/RS L99 BLACK Join Date: Apr 2010
Location: Franklin , MA
Posts: 6,696
|
Have someone hold the pry bar to keep outward pressure to prevent the axle from "bouncing" while you try to knock it out.
|
09-21-2019, 03:56 PM | #20 |
Drives: 2010 Camaro 2SS/RS M6 Join Date: May 2009
Location: Idaho
Posts: 726
|
I finally got it out. I ended up removing the diff from the car so that I could deal with it on the workbench instead of on my 47 year old back on the concrete.
At that point, I could get a full swing on my BFH. I used the best thing I had on hand as a punch, that 1/2 inch drive extension. It fit through the divider between the side gears. After bashing the living hell out of it, I noticed that it had moved far enough to expose the seal surface. A few more heavy handed whacks and it came out. The circlip came out in 3 pieces. I expected it to be broked. You can see how it mashed the splines on the axle stub as it was squeezed between it and the side gear. The side gear is perfect, not distortion of the splines.
__________________
GPI SS2; EE E2 catch can; SP 1 7/8" LT Headers w/ hfc; FM AT 3" cat-back; CAI Cold Air Intake; AEM Wideband
Tuned by GPI McCleod RXT; MGW flat stick; Ram Clutch slave cylinder & hydraulic adjuster BMR cradle & diff bushings, trailing arms, toe rods & upper control arm bushings Hotchkis sub-frame brace Stop Tech Z-23 brakes 4.10 gears, Eaton Truetrac, LPW diff cover Best 1/4 mile 12.073 @ 115.68 mph 3,300 ft DA |
09-21-2019, 03:58 PM | #21 |
SomeguyK
Drives: 2010 Black 2SS/RS Join Date: Nov 2014
Location: FL
Posts: 1,947
|
Nice, glad to see you got it out!
__________________
TMS 427, Dart iron Block, Forged assembly, Frankenstien heads, AGP TT 62/62 BB turbo's, AGP/Fore triple fuel system, Tilton clutch, Holley 1 7/8 shorties, Technostalgia tail lights,Oracle, Aeroforce, MGW shifter,Flowmaster, Pegasus subframe bushings,BMR trailing & toe arms,Z28 UCA bushings,Zl1 rear sway bar,Prothane,BMR,Goodridge brake lines,Ridetech HQ coilovers,3.91,Trutrac,billet caps,DSS axles,HE offest,built TR6060,1LE diffuser,Havoc spoiler,SSclones,20in MRR 017, Pirelli P Zero, Nitto NT555RII
More to come. |
09-21-2019, 06:07 PM | #22 |
Drives: Never just fly under the radar Join Date: Jul 2015
Location: Kansas
Posts: 1,531
|
Willing to bet you got that "oh hell ya finally" sense of accomplishment feeling when it finally came out. Way to stick with it sir!
Oh yeah and thanks for being someone who post results
__________________
1-8-4-3-6-5-7-2
Old Skool |
09-22-2019, 06:33 PM | #23 |
Drives: 2010 Camaro 2SS/RS M6 Join Date: May 2009
Location: Idaho
Posts: 726
|
__________________
GPI SS2; EE E2 catch can; SP 1 7/8" LT Headers w/ hfc; FM AT 3" cat-back; CAI Cold Air Intake; AEM Wideband
Tuned by GPI McCleod RXT; MGW flat stick; Ram Clutch slave cylinder & hydraulic adjuster BMR cradle & diff bushings, trailing arms, toe rods & upper control arm bushings Hotchkis sub-frame brace Stop Tech Z-23 brakes 4.10 gears, Eaton Truetrac, LPW diff cover Best 1/4 mile 12.073 @ 115.68 mph 3,300 ft DA |
09-22-2019, 06:35 PM | #24 | |
Drives: 2010 Camaro 2SS/RS M6 Join Date: May 2009
Location: Idaho
Posts: 726
|
Quote:
Posts are worthless when guys don't bother to post up the solution to the problem. I'm glad to contribute when I can.
__________________
GPI SS2; EE E2 catch can; SP 1 7/8" LT Headers w/ hfc; FM AT 3" cat-back; CAI Cold Air Intake; AEM Wideband
Tuned by GPI McCleod RXT; MGW flat stick; Ram Clutch slave cylinder & hydraulic adjuster BMR cradle & diff bushings, trailing arms, toe rods & upper control arm bushings Hotchkis sub-frame brace Stop Tech Z-23 brakes 4.10 gears, Eaton Truetrac, LPW diff cover Best 1/4 mile 12.073 @ 115.68 mph 3,300 ft DA |
|
09-23-2019, 09:47 PM | #25 | |
|
Quote:
__________________
Car mods: never enough!
|
|
|
|
|
|