09-01-2018, 05:29 PM | #1 |
Drives: 17 ZL1 Join Date: May 2018
Location: Las Vegas
Posts: 51
|
Corsa xtream with borla 60606 mid pipes
Does anyone have this setup? I just bought the corsa xtream axle back. I was thinking of buying the borla 60606 and making it a full catback, deleting secondary cats and crushed pipes. Just worried it will be crazy loud.
|
09-01-2018, 06:27 PM | #2 | |
Drives: 22' Porsche PDK GT4 Join Date: Mar 2018
Location: Bay Area
Posts: 2,014
|
Quote:
Instead of mix matching Borla and Corsa
__________________
Current:
22' Porsche PDK GT4 (MCS 2-way remote dampers) Previous: 18' NFG 2SS 1LE (ZL1 1LE solid rear cradle bushings & Corsa Exhaust) 16' F80 M3 (Ohlin R/T Coilovers) 13' Audi TTRS (APR Stage 1, MSS Springs) 09' C6 Z06 08' E90 M3 06' 335i (KW V2 Coilovers) 03' C5 Z06 |
|
09-01-2018, 07:00 PM | #3 |
Drives: 17 ZL1 Join Date: May 2018
Location: Las Vegas
Posts: 51
|
Price.. the borla 60606 can he had for 531 right now. The corsa x with secondary cat deletes is 700+. I know I shouldn't be cheap
|
09-01-2018, 07:16 PM | #4 |
Drives: 22' Porsche PDK GT4 Join Date: Mar 2018
Location: Bay Area
Posts: 2,014
|
just seems like a lot more work. The entire Corsa system will match up easier and you don't have to cut.
__________________
Current:
22' Porsche PDK GT4 (MCS 2-way remote dampers) Previous: 18' NFG 2SS 1LE (ZL1 1LE solid rear cradle bushings & Corsa Exhaust) 16' F80 M3 (Ohlin R/T Coilovers) 13' Audi TTRS (APR Stage 1, MSS Springs) 09' C6 Z06 08' E90 M3 06' 335i (KW V2 Coilovers) 03' C5 Z06 |
09-01-2018, 10:05 PM | #5 |
Drives: 2016 Camaro 2SS Join Date: Apr 2018
Location: Central Texas
Posts: 1,011
|
The 60606 bolts up to the corsa axleback with no modification at all it only took me 30 min to install. As far as loudness it gets up there especially when full throttle and cold starts.
|
09-01-2018, 11:52 PM | #6 |
Drives: 17 ZL1 Join Date: May 2018
Location: Las Vegas
Posts: 51
|
That's what I thought. I didnt think it needed any cutting. Where the borla meets the corsa axle back is it reduced to 2 1/2" or something so the axle back can slip over and be clamped? As for how loud it is, is it bad during regular driving? No drone as everyone says?
|
09-02-2018, 05:39 AM | #7 |
Drives: 2016 Camaro 2SS Join Date: Apr 2018
Location: Central Texas
Posts: 1,011
|
Its completely tame while just going around town or cruising on the highway no drone whatsoever.
|
09-02-2018, 12:18 PM | #8 |
Drives: 17 ZL1 Join Date: May 2018
Location: Las Vegas
Posts: 51
|
Puttin can you comment on the 60606 to the corsa axleback. Does it neck down to 2.75 to slip over the corsa axleback? Or do I need to buy different clamps?
|
09-02-2018, 01:18 PM | #9 |
Drives: 2016 Camaro 2SS Join Date: Apr 2018
Location: Central Texas
Posts: 1,011
|
Yes the corsa extreme does neck down to 2.75. The clamps that come with the 60606 just slide over clamp down. The only adjustment you really need to do is make sure the midpipes under the driveshaft are rotated about 45° inward so they don't vibrate against some of the lines under there.
|
09-03-2018, 12:19 PM | #10 |
Drives: 2016 camaro ss2/ a8 Join Date: Jan 2012
Location: atl ga
Posts: 228
|
|
09-08-2018, 09:10 AM | #11 |
Drives: 2017 1LE Join Date: Nov 2017
Location: Brooks, GA
Posts: 697
|
This is direction I'm thinking. Just wish corsa had NPP. Want the functionality.
__________________
'17 Bright Yellow 1LE. PDR, STB, !CAGS
Borla 60606, 11925. Tony Mamo ported TB, ROTOFAB, !Sound Tube |
09-15-2018, 10:21 AM | #12 |
Drives: 2017 1LE Join Date: Nov 2017
Location: Brooks, GA
Posts: 697
|
I got it here. I paid less than price listed, free shipping. https://wheelwell.com/shop/borla/exh...t&model=camaro
__________________
'17 Bright Yellow 1LE. PDR, STB, !CAGS
Borla 60606, 11925. Tony Mamo ported TB, ROTOFAB, !Sound Tube |
|
|
Post Reply
|
|
|