Roto-Fab CAI V6 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

mavfan37 · 11-17-2010, 04:54 PM

Just put this in today. There is definately a throatier sound and you can feel the increase in power at the wheel. Mike at Roto-Fab was a big help. The instructions were easy as cheese. My cousin and I did everything in less than an hour. Just my opinion. Have a great day everyone. I'm going to go drive around for a bit.

CamaroDreams07 · 11-17-2010, 10:24 PM

Looks great, if they had gotten out a bit sooner, I probably wouldve gotten a Roto-Fab color-matched.

Oneday · 11-17-2010, 10:34 PM

Looks awesome!!!

Roto-fab 1 · 11-18-2010, 07:40 AM

Quote:

Originally Posted by CamaroDreams07

Looks great, if they had gotten out a bit sooner, I probably wouldve gotten a Roto-Fab color-matched.

The body color matched air boxes do look good-especially in the Cyber Gray. I love the metallic look in the sunlight. Although we have done quite a few in that color, we don't have any customer pics to show you. Our carbon fiber finish inlet elbow and a Cyber Gray radiator cover would look awesome with what you already have under the hood.

xuanxanh99 · 11-18-2010, 10:09 AM

Thank you share some information great here, I hope can you help when join or visit, contact your address. Wishes your success and health. See you later, I hope you will fast reply in the next time.

MoranoRacing · 11-18-2010, 11:57 AM

Roto-Fab makes some really nice cold air intakes for both the V6 & V8 Camaro. We have never had a complaint about these kits. Fit and finish is 2nd to none.

a red maro · 11-22-2010, 02:35 PM

yeah i just put in a order for mine. I'm excited to get in and install it I'll post pics as soon as i get it and tell yall my opinions on the intake

CamaroDreams07 · 11-22-2010, 03:46 PM

Quote:

Originally Posted by Roto-fab 1

The body color matched air boxes do look good-especially in the Cyber Gray. I love the metallic look in the sunlight. Although we have done quite a few in that color, we don't have any customer pics to show you. Our carbon fiber finish inlet elbow and a Cyber Gray radiator cover would look awesome with what you already have under the hood.

Appreciate the info, but I can't see taking a loss to replace a perfectly good CAI right now. Maybe in the future I will have more disposable income.

GPC1 · 11-22-2010, 03:52 PM

They are top-notch quality! Definately our go to people for Cold Air Intakes!

Roto-fab 1 · 11-23-2010, 09:56 AM

Quote:

Originally Posted by CamaroDreams07

Appreciate the info, but I can't see taking a loss to replace a perfectly good CAI right now. Maybe in the future I will have more disposable income.

That's definitely understandable. Hey, we are all hoping for more disposable income!

highline · 11-29-2010, 12:32 PM

newb here...does this rotofab cai require a tune (I would highly think so, as the A/F ratio would be dramatically changed)? Void warranty (I'm a ford guy and learning about the gm warranty)...

KMPrenger · 11-29-2010, 12:46 PM

Quote:

Originally Posted by highline

newb here...does this rotofab cai require a tune (I would highly think so, as the A/F ratio would be dramatically changed)? Void warranty (I'm a ford guy and learning about the gm warranty)...

Nope. No tune required. There are lots of CAI's on the market for the V6 now, and none of them require a tune. Not saying a tune couldn't help a little, but it wouldn't be much of a gain at all.

Roto-fab 1 · 11-29-2010, 12:59 PM

Quote:

Originally Posted by highline

newb here...does this rotofab cai require a tune (I would highly think so, as the A/F ratio would be dramatically changed)? Void warranty (I'm a ford guy and learning about the gm warranty)...

Our intake doesn't require a tune. I'm very confident you will be happy with all aspects of this system from our product packaging down to installation, appearance sound and performance. Thanks for considering our products.

11-17-2010, 04:54 PM	#1
mavfan37 Get is son! Drives: 2013 DIB Mustang 5.0 Join Date: Sep 2010 Location: Arlington, TX Posts: 332	Roto-Fab CAI V6 Just put this in today. There is definately a throatier sound and you can feel the increase in power at the wheel. Mike at Roto-Fab was a big help. The instructions were easy as cheese. My cousin and I did everything in less than an hour. Just my opinion. Have a great day everyone. I'm going to go drive around for a bit. Attached Images __________________ ^SOLD '13 DIB 5.0

11-17-2010, 10:24 PM	#2
CamaroDreams07 Drives: Slow V6 Join Date: Jun 2009 Location: East Lansing, MI Posts: 9,361 View My Garage	Looks great, if they had gotten out a bit sooner, I probably wouldve gotten a Roto-Fab color-matched. __________________ [B]

11-18-2010, 10:09 AM	#5
xuanxanh99 Drives: juny Join Date: Oct 2010 Location: vn Posts: 3	Thank you share some information great here, I hope can you help when join or visit, contact your address. Wishes your success and health. See you later, I hope you will fast reply in the next time. __________________ Travel vietnam-Sapa tour package-Hanoi Vietnam

11-22-2010, 02:35 PM	#7
a red maro Drives: Victory Red 2lt RS V6 auto Join Date: Mar 2010 Location: Alice Tx. Posts: 156	yeah i just put in a order for mine. I'm excited to get in and install it I'll post pics as soon as i get it and tell yall my opinions on the intake __________________ so dirty but yet so clean

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official 1/4 Mile (V8) 2010+ Camaro Fast List	Merc	Dragstrip and Launch Techniques Discussion	3652	08-17-2023 02:50 PM
500 mile 2010 Camaro Roto Fab intake!!!	tbird31	V8 - Engine, Exhaust, Bolt-Ons, Tuning Equipment	19	12-02-2010 04:04 PM
LS3 goes 11`s Bonestock!	GMRULZ	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	28	12-08-2008 09:10 PM

11-17-2010, 10:34 PM	#3
Oneday Drives: 2010 2LT RS / Chrysler 300c Join Date: Sep 2009 Location: Southern Illinois Posts: 88	Looks awesome!!!

11-18-2010, 11:57 AM	#6
MoranoRacing Account Suspended Drives: 2005 GTO, 1973 Camaro Join Date: Aug 2009 Location: Westchester Posts: 460	Roto-Fab makes some really nice cold air intakes for both the V6 & V8 Camaro. We have never had a complaint about these kits. Fit and finish is 2nd to none.

11-22-2010, 03:52 PM	#9
GPC1 Drives: Camaro SS Join Date: Oct 2009 Location: NEW ALEXANDRIA PA Posts: 1,300	They are top-notch quality! Definately our go to people for Cold Air Intakes!

11-29-2010, 12:32 PM	#11
highline Drives: LS Join Date: Nov 2010 Location: Texas Posts: 43	newb here...does this rotofab cai require a tune (I would highly think so, as the A/F ratio would be dramatically changed)? Void warranty (I'm a ford guy and learning about the gm warranty)...