RGB help

[Brammon]

I’m planning on getting rgbw boards, demon eyes, and halo drl’s for my 2010 2SSRS. Is there such thing as rgbw bulbs? I feel like rgb halos and the white led’s would look out of place. I have the harness so they’re always on too. Any help would be appreciated.

[Brammon]

Still need help with this

[TommyTheCat]

check out either gen5diy or sjmautoprod for rgbw options.

[Brammon]

I still couldn’t find actual bulbs. I found these: https://www.ebay.com/itm/173939321223

But they don’t have any reviews or anything

['10CamaroDude]

RED+BLUE+GREEN = White


It's not RGBW, it's when all three colors mix, you get white:

[Brammon]

Originally Posted by '10CamaroDude

RED+BLUE+GREEN = White


It's not RGBW, it's when all three colors mix, you get white:

I know that. But still, are there any drl bulbs that do this? The p13w’s

[Talladega]

The good ones are RGBW. Some manufactures are RGB and some are RGBW. If you compare a white on an RGB with the white on an RGBW the RGB one looks blue. When I replace the bulbs on LED's on my with Diode Dynamics the board has 4 lights on it Red, Green, Blue and White.

https://www.diodedynamics.com/2010-2...ed-boards.html

Originally Posted by '10CamaroDude

RED+BLUE+GREEN = White


It's not RGBW, it's when all three colors mix, you get white:

[swampcritter]

Had my head lights done by Shelby and couldn't be happier with them.Get in touch with Shelby , he'll fix you up right. Joe

[sjmautoprod]

Diode Dynamics used to make these for the DRLs. I guess they didn't sell enough.

[davesnever]

Originally Posted by '10CamaroDude

RED+BLUE+GREEN = White


It's not RGBW, it's when all three colors mix, you get white:

You can buy both RGB and RGBW leds. Some RGB leds do not produce white very well, that's what the RGBW are for. A dedicated white.