ZL1 or Z/28 belly pan on a 2013 1LE

[Firefighter]

Originally Posted by larry_g

Resurrecting an older thread here. Been thinking about adding a belly pan to my 2014 1LE daily driver to see if it will help keep some of the road grime out of the engine compartment, did any of you notice a difference with that?

As far as aero stability, did adding the belly pan throw anything out of balance that you needed to offset?

Thanks for any input.

I did the pan on my '13. I noticed a few things. At higher speeds it seems more stable, even though that was never a complaint for me, underhood stays cleaner, and gas mileage went from an average of 13 or 14 to over 17 mpg... as long as you have vents on your hood which a '14 does it's almost a mandatory mod imho. I have a GTZ hood for a while now.

Sent from my SM-G935V using Tapatalk

[larry_g]

Originally Posted by Firefighter

I did the pan on my '13. I noticed a few things. At higher speeds it seems more stable, even though that was never a complaint for me, underhood stays cleaner, and gas mileage went from an average of 13 or 14 to over 17 mpg... as long as you have vents on your hood which a '14 does it's almost a mandatory mod imho. I have a GTZ hood for a while now.

Sent from my SM-G935V using Tapatalk

That's what I needed to hear...time to go shopping.

Thanks,
Larry

[Camaro2ss6speed]

hello sorry for bringing this thread back from the dead but would that zl1 underbelly fit my 2011 camaro ss? and do i have the holes there or would need to drill?

[olblue75]

So I have a 10 an I don’t have the holes but it will fit if your willing to drill the holes and get some 3/8’ish self tapping bolts. That what I used on mine.