12-28-2019, 06:09 PM | #477 |
Drives: 2022 1SS 1LE A10 BCD WCT+PDR Join Date: Mar 2008
Location: Johnstown, PA
Posts: 3,203
|
I agree, the SS 1LE should've come with the 6 pistons from the ZL1. I've been running the ZO6 calipers with the vented pistons since 2016. I run Raybestos ST43 pads and have the Quantum ducts. I've used both the OE ZL1 rotor and the DBA ZO6 ring. Both are great and I think the DBA ring may last a touch longer.
I initially sprayed my ZO6 calipers with VHT caliper paint, but the paint blistered. So in 2018 I sandblasted the calipers and used the G2 caliper epoxy system. The G2 is way better and they still have the bright red color with no degradation of the coating. When I did this rebuild in 2018 the OE seals were toast, but as we near 2020, they currently still look brand new. My braking technique is way better than in 2016 and while I use them harder, I am using them in a shorter time period.
__________________
2022 1SS 1LE A10 BCD WCT+PDR2014 1SS 1LE NPP RECARO SIM-SOLD1995 Z28 M6 GSC PGM-SOLD1975 NOVA COUPE 300HP 350 TH350 FLASH RED-SOLD
|
04-13-2020, 02:59 PM | #478 |
Drives: 2011 2SS/RS Join Date: Feb 2016
Location: Jacksonville FL
Posts: 1,190
|
Once again thread is being revived.
I have priced most of this stuff out but cant find a clear answer. I love slotted rotors but they only come in one piece from R1 ( what i currently have and love them ) Will theCTS-V 1 piece fit or do i have to go with 2 piece rotors and go blank (no slot)?
__________________
•2011 Camaro SS 2SS/RS A6
•MRR M017 1le Replica Wheels •Vararam Ram Air Intake •Speed Engineering Longtube Headers w/ Magnaflow HF Cats •Bo White PnP Stage 2 TB •GPI SS2 VVT Cam w Cometic thin gaskets 10.69 compression •Xpipe w/ Res Delete and NPP Exhaust •Tuned By Anonymous Calibrations •Gen5DIY Mylink Conversion W/ Backup Cam •Morel 3 way custom speakers, Infinity 860w Subwoofers in trunk baffle •Helix P6 6ch amp w/ 8ch DSP and P1 Sub amp |
04-13-2020, 03:41 PM | #479 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
If you can get a hold of a set of ZL1 hats you can use DBA rotors for a C7 GS/Z06.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
04-13-2020, 05:27 PM | #480 | |
Drives: 2011 2SS/RS Join Date: Feb 2016
Location: Jacksonville FL
Posts: 1,190
|
Quote:
Found BNIB CTS-V calipers 2013 model for 350ea
__________________
•2011 Camaro SS 2SS/RS A6
•MRR M017 1le Replica Wheels •Vararam Ram Air Intake •Speed Engineering Longtube Headers w/ Magnaflow HF Cats •Bo White PnP Stage 2 TB •GPI SS2 VVT Cam w Cometic thin gaskets 10.69 compression •Xpipe w/ Res Delete and NPP Exhaust •Tuned By Anonymous Calibrations •Gen5DIY Mylink Conversion W/ Backup Cam •Morel 3 way custom speakers, Infinity 860w Subwoofers in trunk baffle •Helix P6 6ch amp w/ 8ch DSP and P1 Sub amp Last edited by Leo72793; 04-13-2020 at 06:01 PM. |
|
04-14-2020, 08:54 AM | #481 |
Drives: 2022 1SS 1LE A10 BCD WCT+PDR Join Date: Mar 2008
Location: Johnstown, PA
Posts: 3,203
|
The OE ZL1 hats are not available for sale. Sometimes someone here on the forums will sell them used off of an old set of OE ZL1 rotors. I've seen them on ebay also.
__________________
2022 1SS 1LE A10 BCD WCT+PDR2014 1SS 1LE NPP RECARO SIM-SOLD1995 Z28 M6 GSC PGM-SOLD1975 NOVA COUPE 300HP 350 TH350 FLASH RED-SOLD
|
04-14-2020, 09:01 AM | #482 |
Drives: 2011 2SS/RS Join Date: Feb 2016
Location: Jacksonville FL
Posts: 1,190
|
I figured. Hopefully someone has a set.
__________________
•2011 Camaro SS 2SS/RS A6
•MRR M017 1le Replica Wheels •Vararam Ram Air Intake •Speed Engineering Longtube Headers w/ Magnaflow HF Cats •Bo White PnP Stage 2 TB •GPI SS2 VVT Cam w Cometic thin gaskets 10.69 compression •Xpipe w/ Res Delete and NPP Exhaust •Tuned By Anonymous Calibrations •Gen5DIY Mylink Conversion W/ Backup Cam •Morel 3 way custom speakers, Infinity 860w Subwoofers in trunk baffle •Helix P6 6ch amp w/ 8ch DSP and P1 Sub amp |
06-15-2020, 10:21 AM | #483 |
Drives: 2014 1le 1SS CRMT Join Date: Apr 2014
Location: Boston mass
Posts: 1,178
|
Hello ,i have Z06 calipers ,stop tech rotors ,hawk pads & good wrench braided lines on the way .Do I need the Zl1 front brake shields or not?
Thanks Sorry i just found it I dont need them lol |
06-15-2020, 02:49 PM | #484 | |
Drives: Black '13 2SS/RS/1LE w/NPP/NAV Join Date: Oct 2012
Location: Tampa by way of Miami...
Posts: 4,934
|
Quote:
Sent from my SM-T837V using Tapatalk
__________________
My Build Thread... http://www.camaro5.com/forums/showthread.php?t=285054
|
|
06-15-2020, 02:54 PM | #485 |
Drives: 2014 1le 1SS CRMT Join Date: Apr 2014
Location: Boston mass
Posts: 1,178
|
|
06-19-2020, 09:11 PM | #486 |
Drives: 2014 1le 1SS CRMT Join Date: Apr 2014
Location: Boston mass
Posts: 1,178
|
Ok so i have those Z06 vented brakes and Goodridge brake lines
So I need to know the torque specs for the calipers and the torque specs for the goodridge lines Thanks |
06-23-2020, 08:29 AM | #487 |
Drives: 2015 2ss Join Date: Jun 2009
Location: Carol Stream IL
Posts: 638
|
for caliper bolt torque specs (per my Haynes manual) it lists 30ft-lbs and then rotate another 90 degrees. unless Goodridge has different torque specs, it shows the OEM torque specs on the banjo bolt is also 30ft-lbs
__________________
2015 Camaro 2ss, NicKey Performance built/tuned |
06-23-2020, 11:21 AM | #488 | |
Drives: Black '13 2SS/RS/1LE w/NPP/NAV Join Date: Oct 2012
Location: Tampa by way of Miami...
Posts: 4,934
|
Quote:
Sent from my SM-T837V using Tapatalk
__________________
My Build Thread... http://www.camaro5.com/forums/showthread.php?t=285054
|
|
06-23-2020, 11:38 AM | #489 |
Drives: Black '13 2SS/RS/1LE w/NPP/NAV Join Date: Oct 2012
Location: Tampa by way of Miami...
Posts: 4,934
|
This is an old post it should straighten you out. I personally got rid of the TTY bolts. Zero problems.
Sent from my SM-G973U using Tapatalk
__________________
My Build Thread... http://www.camaro5.com/forums/showthread.php?t=285054
|
06-23-2020, 03:26 PM | #490 |
Drives: 2014 1le 1SS CRMT Join Date: Apr 2014
Location: Boston mass
Posts: 1,178
|
|
|
|
|
|