08-10-2021, 07:52 PM | #1 |
Drives: ls3 Mustang Join Date: Feb 2015
Location: Michigan
Posts: 173
|
3.860 stroke crank from the new 6.6 engine
Crank is from the newer 2020 plus GM 6.6 Liter V-8 L8T Engine.....................
I have one now and might be getting more...... guys are putting them in the Ls 6.2 blocks and making 400ci. ......These are the better stronger steel cranks......$500 plus shipping Last edited by booboo37; 08-11-2021 at 11:07 AM. |
08-10-2021, 09:54 PM | #2 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
What motor is the 6.6 coming in?
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
08-11-2021, 12:49 AM | #3 |
Drives: 2015 2SS/RS with Twin Turbskies Join Date: Dec 2017
Location: Shreveport, LA
Posts: 264
|
A little more info and I am definitely interested.
|
08-11-2021, 03:34 AM | #4 |
Drives: 69 Camaro Pace Car Join Date: Oct 2009
Location: Kansas City, MO
Posts: 113
|
I assume it's from this:
GM 6.6 Liter V-8 L8T Engine The L8T V8 is a gasoline engine produced by General Motors for use in Heavy Duty pickup trucks. The engine displaces 6.6 liters in a V8 configuration and an OverHead Valve (OHV) layout otherwise referred to as push-rod. It is part of GM’s fifth-generation Small Block engine family and made its debut in the all-new 2020 Chevrolet Silverado HD and 2020 GMC Sierra HD. https://gmauthority.com/blog/gm/gm-engines/l8t/ |
08-11-2021, 06:13 AM | #5 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
So it’s a LT base engine like in the 6th Gens an C7/8 Corvettes?
I didn’t think LT based cranks would work in Gen4 engine platform. Need to check this out on the LS Forums.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
08-11-2021, 06:41 AM | #6 |
Drives: 69 Camaro Pace Car Join Date: Oct 2009
Location: Kansas City, MO
Posts: 113
|
Evidently there are some parts you need to swap around but it looks like it would work.
https://ls1tech.com/forums/generatio...er-option.html This is the crankshaft and one of the recommended parts is the crank timing gear to allow the LT crank to be used in an LS engine. It has the center counter weights also. https://sdparts.com/i-24498593-genui...rankshaft.html |
08-11-2021, 10:59 AM | #7 |
Drives: ls3 Mustang Join Date: Feb 2015
Location: Michigan
Posts: 173
|
Yes crank is from the newer 2020 plus GM 6.6 Liter V-8 L8T Engine...........Looks like you guys have this all figured out...........i have sold 2 and getting a couple more.....
|
08-12-2021, 10:53 PM | #8 |
Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016
Location: Spring Hill, FL
Posts: 4,574
|
Not going to lie, this has my head spinning with ideas. I still have my L99 sitting in the living room on the stand, waiting for something to do.
OP, I know this is a sales thread, but thanks for the info. This is some real good stuff that I had no idea about. GLWS btw.
__________________
2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI
|
08-22-2021, 01:41 AM | #9 |
Drives: 2018 Camaro 2SS, Hyper Blue Join Date: Jun 2016
Location: Next Level Tuning - Chicago
Posts: 186
|
$500 shipped to 60403?
__________________
2018 2SS, A8, NAV, NPP, MRC, Sunroof, Hyperblue, LT4 S/C, LT4 Fuel System, RotoFab CAI, Headers, HiFlo Cats
2016 2SS, A8, NAV, NPP, MRC, Sunroof, Hyperblue (GM buyback) 1999 Trans Am Firehawk, M6, headers, no-cats, slp exhaust, hot cam, intake, 3:73 gears. Red/Blk |
08-28-2021, 06:13 AM | #10 |
Drives: ls3 Mustang Join Date: Feb 2015
Location: Michigan
Posts: 173
|
|
08-30-2021, 04:27 AM | #11 |
Drives: ls3 Mustang Join Date: Feb 2015
Location: Michigan
Posts: 173
|
All 3.860 cranks are sold.........Might get more in a week or 2
I still have one Ls3 dry sump crank and one Ls7 crank.... |
09-12-2021, 07:36 PM | #12 |
Drives: 2010 Camaro SS Join Date: Jul 2021
Location: Louisiana
Posts: 60
|
Will it wotk on 2010 camaro ls3 & when will more be available
|
|
|
|
|