anyone install a mightymouse catchcan on ls3?

[Bretts]

I am going to get the pcv catch can from mighty mouse solutions, it makes sense to me to have a relief for pressure in the system as to protect my rear main oil seal and keep my oil dipstick seated etc, I won't have the boost yet but thinking for the future here, have to do some thinking on best hook up points anyone done this mod ? I am sure Dave will help me out, but pics would great if this exists out there

[blake-b]

The can will come with directions. If you have questions, Dave is super helpful.

http://media.wix.com/ugd/dddf24_10a3...fd8ea37aa9.pdf

I don't have any pics of the setup I had but that can flat out works! I bought one of his newer ones to use on my current project. It isn't hooked yet.

[Bretts]

cool thanks man! I think the draft can set up looks good and straight forward might have to go that route over the pvc can can't wrap my head around the routing yet lol

[blake-b]

If it makes you feel any better, I have the PCV version (three port version).
-one line from intake to can pcv fitting
-one line from each valve cover to can
-two lines from valley cover to turbos (one line to each turbo intake tube)

[Bretts]

Dave is giving me a call later talk about good customer service

[Unreal]

Dave is awesome. The MM cans are the best commonly available cans out there.

[Smittty]

You can't go wrong with a MM Can. Dave is top notch.