1LE build and Journal - SUKXOST [COTW 12/31/12]

[SUKXOST]

Originally Posted by Bomino

1/4 Times?

Originally Posted by Stephen12ZL1

post those et&mph with 60'

Only got 4 passes in. Best pass (2nd)was 11.67 @ 123 and a 1.83 60'.




Even on these street tires, there is more this car is capable of IMO. Moar practice!

I'm still getting used to launching this car of course. Started @ 29lbs in the tires. Dropped to 24 and had 2 decent passes......the last pass I dropped to 23lbs(warning light came on for tire pressure) and I did a longer burnout and tried to launch harder......and of course......spun like crazy

Biggest problem was putting the throttle down appropriately and then finding the right spot to hit 2nd gear. 3-4 went well enough but I have to find that sweet spot in the powerband/RPM range to get more out of my 1-2 transition.

[SUKXOST]

Track pics above^

Couple recent IPhone pics below:

[SUKXOST]

New flyby vid:

[menendez1293]

The car is looking and sounding great. If I could order any Camaro right now it would be one very similar to yours

[SUKXOST]

Originally Posted by menendez1293

The car is looking and sounding great. If I could order any Camaro right now it would be one very similar to yours

...just maybe with a Z28 badge on it? LOL Thanks man! I love how it sounds too!

[SUKXOST]

This was on 1/3 tank of gas in full trim. I left the tire kit in the trunk, everything in the glove compartment....even my phone/chargers etc.

Below are a current list of mods I've completed on my car as it sits and what she weighed: 3820lbs

Package Options: Basically everything but the sunroof and sub options
1LE package
2SS
RS Package
7" Touch screen navigation
ZL1 dual mode exhaust
Interior pedals/cup holder illumination
Exterior Modifications
Heritage grill
Harder 315's on the rear wheels
Debadged rear
Tinted @ 20%
Blacked out all exterior lighting
Engine Bay mods
TVS2300 w/ overdrive set up
FIC 850 injectors
RotoFab intake w/ washer bottle relocation
Stainless Works L/T headers
Pfadt -1 1/4" drop springs
AI Competition Chiller
PROSPORT EVO wideband and Boost gauges
RX catch can w/ breather
Intake scoop

1/3 tank:


3820lbs (take out the few items in the car I'd say 3815 is more accurate)


Thought she'd be a bit heavier with the maxed out options and the blower on the front and all the beefed up 1LE parts.

[SUKXOST]

Got off my ass today and ordered:
LPE GT9 cam:

Double vavlespring titanium retainer and seal kit:

...and some hardened 5/16 7.400 rods:

[Jessika]

Getting blown better... all day long!

-sent from my Note 2 using tapatalk 2

[SUKXOST]

^ She IS the best :P

[Bad@ssCamaro]

Congrats You're going to make her more beastier huh? How much more HP and TQ will it add, will it push you over 600?

[SUKXOST]

Originally Posted by Bad@ssCamaro

Congrats You're going to make her more beastier huh? How much more HP and TQ will it add, will it push you over 600?

I'm told that with I/H and dual mode exhaust I should gain 30WHP.....not sure about TQ.

My MAIN goal with this was to drop boost to run a lil safer level so I'm not too concerned with the gains....but it will be nice :P

SHOULD put me over 600WHP

[SUKXOST]

Recent Cars and Coffee Richmond meet:

[SUKXOST]

Dropping my car off at the shop for my cam install.

[SUKXOST]

A couple pics that Performance Autosports took for me from my Cam/springs/rods swap today... Just waiting to have them retune her now :P







Stock guts out


THIS is what went back in:

LPE GT9 cam:

Double vavlespring titanium retainer and seal kit:

in:


...and some hardened 5/16 7.400 rods: