SS Brembo Calipers and Rotors - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

2011WhiteSS · 02-21-2017, 11:08 AM

Front and Rear Calipers

Front and rear Brake hoses/clips/bolts

Front and rear caliper bolts/pins/retainer

Front Pads (I reused the rear pads)

Front rotor backing plates. (Swapped to ZL1 calipers and new backing plate was used)

The rotors where sprayed down and bagged so they have no rust.
Wiped a section so you can see.

I think other than rear pads and rear backing plate is all that would be needed to swap onto a V6 car.

I have no desire to break up and sell individual parts. Buy them and sell what you don't need.

Asking shipped $850 plus PayPal fees.

All parts Taken off the car with only 5-6000 miles.

Sent from my iPhone using Tapatalk

2011WhiteSS · 02-21-2017, 11:19 AM

I am firm on the price because of the shipping cost.

If someone is local and wants to pick them (Dayton Ohio) I'll take $750 cash.

Sent from my iPhone using Tapatalk

2011WhiteSS · 02-21-2017, 02:48 PM

This would be a good opportunity to have another set of calipers to send off for Powdercoating and not have to have any down time.

Sent from my iPhone using Tapatalk

zepworld01 · 02-21-2017, 03:18 PM

They look good, might be interested.

Sent from my SAMSUNG-SM-G935A using Tapatalk

2011WhiteSS · 02-21-2017, 08:37 PM

Quote:

Originally Posted by zepworld01

They look good, might be interested.

Sent from my SAMSUNG-SM-G935A using Tapatalk

Send me a PM if you have any questions.

Sent from my iPhone using Tapatalk

2011WhiteSS · 02-24-2017, 08:39 AM

.

Sent from my iPhone using Tapatalk

2011WhiteSS · 03-04-2017, 01:02 PM

Still for sale. Boxed and ready to ship.

Sent from my iPhone using Tapatalk

2011WhiteSS · 03-12-2017, 11:53 AM

Bump.
Will trade for a Eaton TrueTrac.
You pay shipping on both.

Sent from my iPhone using Tapatalk

2011WhiteSS · 03-19-2017, 09:14 PM

Bump.

Sent from my iPhone using Tapatalk

2011WhiteSS · 04-13-2017, 07:56 PM

PM replied. Still for sale.

Sent from my iPhone using Tapatalk

JKinion08 · 05-15-2017, 12:21 PM

Still have these? Im in Dayton as well, I think you're in SWOCC with me?

2011WhiteSS · 05-15-2017, 07:21 PM

Quote:

Originally Posted by JKinion08

Still have these? Im in Dayton as well, I think you're in SWOCC with me?

Yes. And yes.

Sent from my iPhone using Tapatalk

2011WhiteSS · 06-17-2017, 09:36 AM

I was asked what else was needed for a swap onto a V6.
Should only need the rear backing plates and rear pads.
The old caliper bolts are included but they are TTY bolts so you are supposed to replace them. Some guys don't. Up to you.

Sent from my iPhone using Tapatalk

Sensitive · 06-18-2017, 12:23 AM

I'm in the market for some. Leaving a comment to come back to!

02-21-2017, 11:08 AM	#1
2011WhiteSS Drives: 2011 White 2SS Join Date: May 2011 Location: Ohio Posts: 408	SS Brembo Calipers and Rotors Front and Rear Calipers Front and rear Brake hoses/clips/bolts Front and rear caliper bolts/pins/retainer Front Pads (I reused the rear pads) Front rotor backing plates. (Swapped to ZL1 calipers and new backing plate was used) The rotors where sprayed down and bagged so they have no rust. Wiped a section so you can see. I think other than rear pads and rear backing plate is all that would be needed to swap onto a V6 car. I have no desire to break up and sell individual parts. Buy them and sell what you don't need. Asking shipped $850 plus PayPal fees. All parts Taken off the car with only 5-6000 miles. Sent from my iPhone using Tapatalk

02-21-2017, 11:19 AM	#2
2011WhiteSS Drives: 2011 White 2SS Join Date: May 2011 Location: Ohio Posts: 408	I am firm on the price because of the shipping cost. If someone is local and wants to pick them (Dayton Ohio) I'll take $750 cash. Sent from my iPhone using Tapatalk

02-21-2017, 02:48 PM	#3
2011WhiteSS Drives: 2011 White 2SS Join Date: May 2011 Location: Ohio Posts: 408	This would be a good opportunity to have another set of calipers to send off for Powdercoating and not have to have any down time. Sent from my iPhone using Tapatalk

02-21-2017, 03:18 PM	#4
zepworld01 Join Date: May 2016 Posts: 7	They look good, might be interested. Sent from my SAMSUNG-SM-G935A using Tapatalk

02-24-2017, 08:39 AM	#6
2011WhiteSS Drives: 2011 White 2SS Join Date: May 2011 Location: Ohio Posts: 408	. Sent from my iPhone using Tapatalk

03-04-2017, 01:02 PM	#7
2011WhiteSS Drives: 2011 White 2SS Join Date: May 2011 Location: Ohio Posts: 408	Still for sale. Boxed and ready to ship. Sent from my iPhone using Tapatalk

03-12-2017, 11:53 AM	#8
2011WhiteSS Drives: 2011 White 2SS Join Date: May 2011 Location: Ohio Posts: 408	Bump. Will trade for a Eaton TrueTrac. You pay shipping on both. Sent from my iPhone using Tapatalk

03-19-2017, 09:14 PM	#9
2011WhiteSS Drives: 2011 White 2SS Join Date: May 2011 Location: Ohio Posts: 408	Bump. Sent from my iPhone using Tapatalk

04-13-2017, 07:56 PM	#10
2011WhiteSS Drives: 2011 White 2SS Join Date: May 2011 Location: Ohio Posts: 408	PM replied. Still for sale. Sent from my iPhone using Tapatalk

05-15-2017, 12:21 PM	#11
JKinion08 Drives: 2015 2LT RS Join Date: Jun 2016 Location: Ohio Posts: 2	Still have these? Im in Dayton as well, I think you're in SWOCC with me?

06-17-2017, 09:36 AM	#13
2011WhiteSS Drives: 2011 White 2SS Join Date: May 2011 Location: Ohio Posts: 408	I was asked what else was needed for a swap onto a V6. Should only need the rear backing plates and rear pads. The old caliper bolts are included but they are TTY bolts so you are supposed to replace them. Some guys don't. Up to you. Sent from my iPhone using Tapatalk

06-18-2017, 12:23 AM	#14
Sensitive Drives: 2012 Camaro LS Black Join Date: Jun 2017 Location: Aurora, IL Posts: 96	I'm in the market for some. Leaving a comment to come back to!