02-28-2012, 01:17 PM | #1 |
Drives: 2010 SS/RS Supercharged 427 Build Join Date: Nov 2010
Location: Michigan
Posts: 5,504
|
Cold Air Inductions Inc. ZL1 CAI
**7-30-13 UPDATE**
The time has come to release some details of our new ZL1 system, enjoy: System Details: First off let me just say that this system has been completely re-designed from any other Camaro CAI we offer. Every component from the TB to the filter was engineered specifically for this vehicle, tested, and proven. The most important design feature of this system, and the piece that is where much of our time has been spent, is the billet MAF housing which is deigned not only as the transition piece from the coupler into the air filter, but also serves as a velocity stack to ensure that the airflow properties are exactly where they need to be to make power, reduce restriction, and stay within the vehicles fuel trim parameters so that a CEL is not thrown. This piece is nearly the size of a softball, and is cut from one solid piece of aluminum, and it allows the MAF sensor to be plugged right into it. The filter is the largest filter we could fit given the space inside the airbox and the angle at which the filter sits in the airbox cavity. Due to the insulated and sealed airbox, the thermal coated billet MAF housing/velocity stack, and the use of a silicone coupler coming off of the TB, heat soak is greatly reduced. Part# 501-1099-10-Z (Near Chrome Finish) Part# 501-1099-10-ZB (Textured Black Finish) Performance: Average HP gain over stock + 19 RWHP Average TQ gain over stock + 20 FT-LB TQ Max HP gain over stock + 19 RWHP Max TQ gain over stock + 21 FT-LB TQ ** These gains were on an otherwise stock ZL1, with the only change made being the CAI. There was no tuning done on this vehicle, and no CEL’s were thrown. Fuel trims looked very good and full pound of boost was gained. We actually seen some higher gains HP on a few pulls, some as high as 24 rwhp, but the 19 rwhp we are claiming should easily be seen should you choose to Dyno the car yourself after installing the CAI ** Dyno Sheet: Price: Due to posting rules we cannot list the price in a non-advertisement section of the forum, but product details, pricing, and ordering are all available at the following link: http://www.coldairinductions.com/store/cold-air-intakes/chevrolet/camaro/6-2l-zl1-supercharged/2013?___SID=U Available in our standard “Near Chrome” or “Textured Black” powder coated finishes. **We are looking into a carbon fiber option as well. The details for a Carbon Fiber finish are completely up in the air right now, I know it would add cost (speculating around $30-$50) and we don’t even know for sure if it’s going to be an option. Availability: ZL1 CAI’s are now available for purchase on our website!!! Shipping will be 6-8 weeks from time of order or from 8-1-13. **We are really pushing ourselves as well as suppliers to have this system available and ready to ship out in 6 weeks, but wanted to leave ourselves a little window for delays, hence the 8 weeks.** Pictures: **NEAR CHROME PICTURES TO BE ADDED AS SOON AS POSSIBLE, WE DID NOT HAVE THE TIME AT THE FEST TO INSTALL BOTH COLOR OPTIONS SINCE THE CAR WAS NEEDED OTHER PLACES, WE ONLY HAD IT FOR A SHORT AMOUNT OF TIME, AND WITH BEING OUTSIDE AND THE SUN BLARING IT WAS DIFFICULT TO GET REAL GOOD SHOTS. THANKS AGAIN BECKY FOR HELPING US OUT!!** **Here is the MAF housing w/ built in velocity stack. This is made in house and is where much of the time testing and tweaking was spent to ensure to best readings were available to the MAF to ensure the most gains while staying within the parameters of the vehicles computer so that a CEL is not thrown and no tuning is required. THE PHOTO SHOWS THE NEAR CHROME VERSION, THIS PIECE WAS A TESTING PIECE SO THE WELDS ARE NOT EXACTLY "PRODUCTION" SPEC** Last edited by Sales @ CAI Inc; 08-05-2013 at 12:59 PM. Reason: Change |
02-28-2012, 01:24 PM | #2 |
Catch me if you can
|
I have one on my SS and I WILL be putting one on the ZL-1. Love your product.
__________________
|
02-28-2012, 01:27 PM | #3 |
Drives: 2010 SS/RS Supercharged 427 Build Join Date: Nov 2010
Location: Michigan
Posts: 5,504
|
|
02-28-2012, 01:32 PM | #4 |
knows 2 facts about ducks
Drives: ...and they're both wrong Join Date: Aug 2009
Location: The HMS Invincible
Posts: 25,072
|
Joe - you need to sign up for this. Like now.
|
02-28-2012, 01:39 PM | #5 |
ZL1 # 1307
Drives: 2012 Camaro ZL1, 2008 Hummzilla H3 Join Date: Nov 2010
Location: Central New York
Posts: 1,911
|
A red air box to match the engine cover would look great, just a suggestion.
|
02-28-2012, 06:57 PM | #6 |
Drives: 2010 SS/RS Supercharged 427 Build Join Date: Nov 2010
Location: Michigan
Posts: 5,504
|
Lots of submits already, thanks guys!
|
03-01-2012, 08:37 AM | #7 |
COTW 12/3/12
Drives: 2012 Ashen Gray ZL1 Join Date: Aug 2011
Location: Glen Carbon, IL
Posts: 3,279
|
I just submitted! I had one on my SS and cannot wait to get on for the ZL1! You guys make a great product!
|
03-02-2012, 07:16 AM | #8 |
Drives: 2010 SS/RS Supercharged 427 Build Join Date: Nov 2010
Location: Michigan
Posts: 5,504
|
|
03-02-2012, 10:38 AM | #9 |
Drives: 2010 camaro Join Date: May 2011
Location: Southeast,
Posts: 842
|
I want one but am not willing to give my car up for testing. Should I still fill one out? A carbon fiber intake would be nice and match the heat extractor.
|
03-02-2012, 10:41 AM | #10 |
Drives: 2010 SS/RS Supercharged 427 Build Join Date: Nov 2010
Location: Michigan
Posts: 5,504
|
|
03-02-2012, 11:25 AM | #11 |
Drives: '98 Camaro Z28, '06 Z06 Join Date: Feb 2011
Location: Missouri
Posts: 533
|
Yep.
__________________
'10 Camaro 2SS/RS A6 Sold :( ARH, FM Super 44's, K&N CAI, ADM scoop, Diablo Tune, RX catch can.
'98 Camaro Z28 M6 TSP headers, true duals, AIR/EGR/AC/muffler delete, CAI, Subframe con., shock tower brace, Stg. 2 T56 rebuild. Monster Clutch Stg. 2, Electric Water Pump, TT2 wheels, 315 NT555's '06 Z06 2LZ, Cam, P/P/M Heads, FAST Intake/TB, ARH, CAI, HP Clutch/FW, C5 Axles, Pfadt Coilovers/Poly Bushings, Carbon Fiber: Everything, lol. HID's, 360 Forged Spec 5's/Invo's, Custom Interior. 550 RWHP http://www.camaro5.com/forums/showthread.php?t=235911 |
03-02-2012, 12:10 PM | #12 |
Drives: 2010 camaro Join Date: May 2011
Location: Southeast,
Posts: 842
|
|
03-02-2012, 12:14 PM | #13 |
Mid-Florida Camaro Club
Drives: 2019 ZL1 on Order Join Date: Jan 2011
Location: Heathrow, FL
Posts: 3,136
|
Submitted
Have one on my current SS and will be getting one on the ZL1 (providing there are proven gains above the stock setup) |
03-02-2012, 04:41 PM | #14 |
Drives: Corvette Join Date: Feb 2012
Location: Tuscaloosa,Al
Posts: 1
|
Does anyone know if you can track a ZL1 if you have a GM order number?
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Transcript of Camaro ZL1 Q&A Webchat with Chevrolet | Tran | Camaro ZL1 Forum - ZL1 Specific Topics | 42 | 12-22-2017 04:42 AM |
FE3 to ZL1 Zway Bar UpgradeZ and ZL1 ZuZpenZion PackageZ | JusticePete | Suspension / Chassis / Brakes | 111 | 05-08-2013 10:38 PM |
CAI cold air induction with E-Force | gearhead440 | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 9 | 08-16-2011 08:16 AM |
Why RAM Air is a myth!!! Long Read (Wall of text) | live2well | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 80 | 11-02-2009 03:34 PM |
LS3 goes 11`s Bonestock! | GMRULZ | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 28 | 12-08-2008 09:10 PM |