12-14-2014, 03:59 PM | #1 |
Drives: 2015 1LE 2SS RS Summit White Join Date: Oct 2014
Location: So CaL
Posts: 96
|
Need plastic push retainer part number# help please
does anyone have the part number for the round black push retainers such as the ones that hold the inner fender liners, and the drip pan under the 14-15 hood vent.
thanks |
12-14-2014, 04:07 PM | #2 |
Drives: 2024Camaro 2SS CE Convertible Join Date: Jul 2013
Location: Texas
Posts: 1,299
|
Autozone or Oreilly has them.
|
12-14-2014, 05:52 PM | #3 |
Drives: 2010 SSII w RS & Sunroof Yellow Join Date: Aug 2009
Location: West Suburbs of Chicago, in a Courthouse Somewhere
Posts: 953
|
If you can be more descriptive I can pinpoint which one you want but here you go.
Insulater retainer (this is not the one that holds the hood pad but rather is in the scoop area) 11571159 Scoop Retainer 10369649 Air deflector retainer 11589295 Fender liner retainer 11589292 The plastic two piece Retainer clip that is used all over the car including the trunk area to hold those plastic covers over the taillights is 11589289 It is about the size of a dime. Last edited by lawdog; 12-14-2014 at 06:08 PM. |
04-19-2017, 09:46 AM | #4 |
Looks like this thread died a few years ago. Several of the above retainers look exactly like what I was looking for (the retainer fasteners for the stock drip pan under the 2014 SS' hood vent). Though there are so many sizes of that type. Anyone know the exact part number for these?
|
|
04-19-2017, 09:48 AM | #5 |
Drives: 2011 2SS/RS Convertible Join Date: Jan 2017
Location: Naperville, IL
Posts: 256
|
Those are just common push clips retainers, just remove one and take it to your local auto parts store and match it up, they come in about a dozen different sizes.
__________________
Richard Partlow
|
04-19-2017, 11:59 AM | #6 |
Drives: 2011 Camaro SS/RS Join Date: Jun 2016
Location: Atlanta, GA
Posts: 182
|
Check Lowes as well. They have an automotive section in the hardware aisle.
__________________
2011 SIM 2SS/RS L99/A6, Rotofab CAI, TSP LTs & hi-flows, SW Retro catback, BMR & Hotchkis goodies, MRR 017s & Nitto 555G2s
|
04-19-2017, 12:31 PM | #7 |
Thanks for the advice guys. I was looking for the exact part number so I could order online, but got off my butt and found them at my local parts store. I just needed some to try out painting them to match the paint job I did on my hood's heat extractor. I think though the contrast with black looks better.
|
|
|
|
Thread Tools | |
|
|