12-30-2017, 07:39 AM | #1 |
Drives: 2017 zl1 a10 Join Date: Oct 2016
Location: Missouri 2017 zl1. Cammed, magnuson 2650 973whp 889ftlbs
Posts: 110
|
Upgrades started (744whp 715torque)
Last drive in 2017 was almost stock and to the shop. First drive in 2018 is going to be not so stock! Cam, headers, e85, 2.30 upper pulley, dsx low side fuel system.
Cars done runs great https://youtu.be/AS2M6tGcCYw Last edited by Langhans2016; 01-13-2018 at 06:38 PM. Reason: Update |
12-30-2017, 09:55 AM | #2 |
Bring It
|
Sub'd.
__________________
2017 Camaro ZL1 M6 - Everything but the sunroof - Sold 2010 Camaro SS - 650RWHP Daily Driver - Traded |
01-03-2018, 09:04 AM | #3 |
Drives: 2017 zl1 a10 Join Date: Oct 2016
Location: Missouri 2017 zl1. Cammed, magnuson 2650 973whp 889ftlbs
Posts: 110
|
Motors out
Got the motor out. One step closer
|
01-03-2018, 12:42 PM | #4 |
Drives: 2017 Hyper Blue ZL1 Convertible Join Date: Jun 2017
Location: Indiana
Posts: 23
|
What are the specs on the cam ?
|
01-03-2018, 02:01 PM | #5 |
Drives: 2017 zl1 a10 Join Date: Oct 2016
Location: Missouri 2017 zl1. Cammed, magnuson 2650 973whp 889ftlbs
Posts: 110
|
|
01-03-2018, 02:29 PM | #6 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
Dam Langhans, you better be trailering that one to the Camaro Fest. Are you doing this at your shop? You must be trying to pass me up, better hurry I'm gonna be in the 9's in the spring.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
01-03-2018, 04:31 PM | #7 |
Account Suspended
Drives: '16 Z51 C7 Corvette Join Date: Jul 2017
Location: Los Angeles, CA
Posts: 97
|
Beast!
-Josh |
01-03-2018, 06:09 PM | #8 |
Drives: 2017 zl1 a10 Join Date: Oct 2016
Location: Missouri 2017 zl1. Cammed, magnuson 2650 973whp 889ftlbs
Posts: 110
|
Haha trying to catch up been stock for way to long! No I’m not doing the work cbi streetcars is. 9s? You going to put a cage in it?
|
01-04-2018, 10:01 PM | #9 |
Drives: 2017 zl1 a10 Join Date: Oct 2016
Location: Missouri 2017 zl1. Cammed, magnuson 2650 973whp 889ftlbs
Posts: 110
|
Motor back together
|
01-04-2018, 10:13 PM | #10 |
Drives: 2017 ZL1 A10 Join Date: Nov 2009
Location: Pearland, TX
Posts: 465
|
How much time did it take to drop the cradle?
|
01-05-2018, 09:48 PM | #11 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
Its in just need to finish. I have Lt4 injectors, 75 mm pulley should put me to 15 lbs of boost and about 720 at the wheels. I went 10.33@135 at gateway last fast in not so good conditions on 11 lbs of boost, so yes 9's are coming in March. Your gonna be a bad hombre to contend with so we should have some fun coming up this year. You'll have to run unlimited with me cause your gonna need a good tire to hook up that power. Good luck and keep me up to date. You have the right guy doing the build. I better get busy so you don't pass me up.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
01-12-2018, 03:37 PM | #12 | |
Drives: 2017 zl1 a10 Join Date: Oct 2016
Location: Missouri 2017 zl1. Cammed, magnuson 2650 973whp 889ftlbs
Posts: 110
|
Start up
It’s alive and started up just waiting on finishing the tune up and dyno hoping early next week
|
|
01-12-2018, 03:57 PM | #13 |
Drives: Slo'ly Join Date: Dec 2017
Location: Denver
Posts: 138
|
Very nice!!!
|
01-12-2018, 05:25 PM | #14 |
Drives: 17 ZL1 Join Date: Mar 2017
Location: VA
Posts: 1,075
|
Sounds bad ass...
__________________
2017 ZL1 Coupe M6, Red Hot
Mods; AFE Pro 5R CAI, Kong Ported Blower and Snout, NW 103 TB, Griptech 2.31 Upper, Kooks 2",JMS Voltage Booster, Flex Fuel, Mighty Mouse CC,Jannetty Racing Tune, 680 rwhp |
|
|
Post Reply
|
|
|