06-04-2019, 06:13 AM | #1 |
Drives: 2011 Camaro 2SS/RS 6 Manual Join Date: May 2011
Location: Ottawa, Ont
Posts: 238
|
Order and paid the ZL1 Rear diff package from my GM dealer and
Just to find out 2 months later that this kit for the M6 is now back ordered from GM Performance for possibly 6 months or maybe longer due to some part that's needed to complete the kit, and what's even worst they would not disclose what parts was missing. My GM dealer tried everything to find a dealer that had one in stock and it appears one GM dealer in Texas had one but it was marked up higher then retail plus $600 us to ship to Canada. My dealer suggested a full refund and go a different route. So I hope I made a good choice.
I went through RDP and ordered a Eaton true-trac with dss 1000hp Shafts, Motive 3.91 Gears,Raytech Installation Kit, LPW Cover, G-force aluminum driveshaft. I'm making around 620rwhp and I'm hoping this will holdup well on drag radials with some 4000 rpm clutch dumps I'm also hoping I can use the Poly Hendrix offset bushings with the LPW rear cover. I'm mostly street driving with occasional use at the dragstrip, Any thoughts on this setup
__________________
[Dyno Results] 684rwhp 602.84Pktq at 6600rpm. Mods: too much to list.
|
06-06-2019, 06:06 PM | #2 |
Drives: Red Jewel Camaro SS Join Date: Mar 2014
Location: East Coast
Posts: 392
|
Too bad,If you want a ZL1 M6 setup. I have a low mileage setup includes diff,axles,driveshaft,hardware,coupler at the tranny,setup that I'd sell. I had 6 ZL1 setups here for a while,still 4 here,I keep them for spare parts,but I'd sell one.I don't really need them all. lol.... I'm located in the East Coast Canada.
__________________
BTR LSX388,AGP Twin Turbo.6L90,GM 9.9" Diff.Fore Innovations Level 4 fuel system.Great fuel economy !!!! 1xxx RWHP
Last edited by JMI; 06-07-2019 at 06:38 AM. |
06-06-2019, 08:31 PM | #3 |
Drives: 12 2SS/RS L99,11 2SS/RS LS3totaled Join Date: Jun 2019
Location: mooresville nc
Posts: 1,048
|
you are da man!! now that's good looking out
|
06-25-2019, 03:27 PM | #4 |
Drives: 2010 Lingenfelter Camaro SS. 600 HP Join Date: Sep 2009
Location: Chester, NY
Posts: 51
|
rear end
will your Diff, axles, driveshaft fit on a 2010 2SS M6. and if it does how much$ do you want for it?
Thanks Mike Elliott |
06-25-2019, 03:30 PM | #5 |
Drives: 2010 Lingenfelter Camaro SS. 600 HP Join Date: Sep 2009
Location: Chester, NY
Posts: 51
|
|
06-26-2019, 10:54 AM | #6 |
Drives: Red Jewel Camaro SS Join Date: Mar 2014
Location: East Coast
Posts: 392
|
I'm in New Brunswick. Yes, I have all the needed parts to do the ZL1 swap in a SS manual.But because our dollar is horrible compare to the US. Parts are not cheap here.I would need $3999.95+tax (Canadian Funds)for the setup if somebody needs one.
__________________
BTR LSX388,AGP Twin Turbo.6L90,GM 9.9" Diff.Fore Innovations Level 4 fuel system.Great fuel economy !!!! 1xxx RWHP
|
|
|
|
|