Eric at MPD1 absolutely great guy - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

chriscamaro69z28 · 01-19-2014, 08:07 PM

Have to share my experience today with Eric and his family as I drove 4 hours to get the copo style hood from him. They welcomed me with open arms. Eric went out of his way to make sure this hood was perfect and it was. If you really haven't seen his products I can tell you he spends a lot of time and is meticulous about his work. I got to see his work all over his garage and he spends a lot of time to make sure anything that leaves his shop is right. He installed my hood for me and made sure before I drove out it was perfect and after realigning my car it was again going out of his way for me. No he didn't pay me to say any of this I wanted to let everyone know I was very pleased with his work and felt after talking with him and his wife I have another friend. I personally want to thank you and your wife u got a friend for life in Tennessee and a customer for life Thanks

Chris82xx · 01-19-2014, 11:17 PM

That's really cool. I'm in the process of picking a new hood and his hood is one of my choices. I'm thinking of giving him a call to discuss some options. Did he paint the hood for you as well?

chriscamaro69z28 · 01-20-2014, 07:01 AM

I think he does paint but you have to ask not really sure but I didn't paint mine yet wasn't in the budget lol but im telling you his products are great

dorfmac · 01-20-2014, 07:59 AM

Two thumbs up for Eric. And if his daughter is any evidence, he is a great family man too!

AL1SS/RS · 01-20-2014, 02:50 PM

+ 1for MPD1 I got his z force hood and my body guy
said it was the best aftermarket hood he's seen .

SSMKNU2 · 01-21-2014, 05:08 PM

I concur, was great to deal with. Even let me go to him to pick up my hood to save on shipping.

grocerygetter · 01-21-2014, 06:09 PM

Cool! He makes nice stuff. Where is he located? City, state.

01-19-2014, 08:07 PM	#1
chriscamaro69z28 army life Drives: 2018 hyper blue zl1 Join Date: Feb 2011 Location: clarksville, tn Posts: 868	Eric at MPD1 absolutely great guy Have to share my experience today with Eric and his family as I drove 4 hours to get the copo style hood from him. They welcomed me with open arms. Eric went out of his way to make sure this hood was perfect and it was. If you really haven't seen his products I can tell you he spends a lot of time and is meticulous about his work. I got to see his work all over his garage and he spends a lot of time to make sure anything that leaves his shop is right. He installed my hood for me and made sure before I drove out it was perfect and after realigning my car it was again going out of his way for me. No he didn't pay me to say any of this I wanted to let everyone know I was very pleased with his work and felt after talking with him and his wife I have another friend. I personally want to thank you and your wife u got a friend for life in Tennessee and a customer for life Thanks __________________ Mods: lingenfelter 15% overdrive pulley, ATI balancer, kooks headers, DSX low side aux pump, DSX flex fuel, GPI stage 2 cam, trans tune, cat delete, rear seat delete, rotofab cai

01-19-2014, 11:17 PM	#2
Chris82xx Make your peace with God! Drives: 2011 Camaro SS/RS M6 Convertible Join Date: Dec 2011 Location: Dirty Jersey Posts: 1,595	That's really cool. I'm in the process of picking a new hood and his hood is one of my choices. I'm thinking of giving him a call to discuss some options. Did he paint the hood for you as well? __________________ ECS base supercharger (NOVI 1500SL), ECS AlKY control kit, 92mm TB, ARH 1 7/8" LT's non-catted, Borla 3" exhaust, ID850 injectors, Squash fuel system, ECS Big Blower Cam, MGW short throw shifter, DSS 1000hp axles, LGW differential cover, billet caps, Tech AFX heater hoses, Pedders differential bushings, Eaton TrueTrac differential, PRC dual valve springs, Katech C5R timing chain, ATI balancer, Meilings oil pump, Pfadt Trailing Arms, Pfadt Tie Rods, Pfadt Sway Bars, Pfadt End Links, DSS Aluminum Driveshaft 811RWHP/719RWTQ UNDER MAJOR OVERHAUL!!

01-20-2014, 07:01 AM	#3
chriscamaro69z28 army life Drives: 2018 hyper blue zl1 Join Date: Feb 2011 Location: clarksville, tn Posts: 868	I think he does paint but you have to ask not really sure but I didn't paint mine yet wasn't in the budget lol but im telling you his products are great __________________ Mods: lingenfelter 15% overdrive pulley, ATI balancer, kooks headers, DSX low side aux pump, DSX flex fuel, GPI stage 2 cam, trans tune, cat delete, rear seat delete, rotofab cai

01-20-2014, 02:50 PM	#5
AL1SS/RS Drives: 2012 camaro 1SS/RS LS3 Join Date: Oct 2012 Location: Downingtown pa. Posts: 94	+ 1for MPD1 I got his z force hood and my body guy said it was the best aftermarket hood he's seen . __________________

01-21-2014, 05:08 PM	#6
SSMKNU2 Drives: 2012 2SS/RS Join Date: Jul 2012 Location: Central IL Posts: 901	I concur, was great to deal with. Even let me go to him to pick up my hood to save on shipping. __________________ My Build thread! http://www.camaro5.com/forums/showthread.php?t=317027

01-20-2014, 07:59 AM	#4
dorfmac www.macsautodetail.com Drives: 2010 2LT/RS Join Date: Nov 2011 Location: Baltimore Posts: 1,894 View My Garage	Two thumbs up for Eric. And if his daughter is any evidence, he is a great family man too!

01-21-2014, 06:09 PM	#7
grocerygetter instigator Drives: 2020 6.2 Trail Boss, 2022 XC90 Join Date: Jan 2010 Location: 72034 Posts: 3,979 View My Garage	Cool! He makes nice stuff. Where is he located? City, state. __________________ -John S.