06-04-2011, 11:20 AM | #1 |
Drives: A Gift From My Wife Join Date: Apr 2009
Location: Powder Springs, GA
Posts: 1,557
|
How would you use a PC to fix this?
It's not Camaro related but you guys have a bunch of knowledge so I wanted to throw this out to you.
It's a 1998 Black BMW and the paint was in this condition when I bought the car. In the near future I am going to invest in a PC and would like your ideas on how to fix this. All the horizontal surfaces of the car have the same damage. Any tips for a noob and a new PC? -Funk
__________________
2012 Convert 2SS/RS SW/IO LS3 - Build #1081
07/21/2011 - (3800) Order produced and vehicle is being prepared for shipping. 08/09/2011 - (4200) Shipped (vehicle is shipped to the dealer or interim point of delivery). 08/16/2011 - (5000) Vehicle has been delivered to dealer. 08/19/2011 - In my possession. |
06-04-2011, 11:33 AM | #2 |
Booooosted.
|
PCs don't work on BMWs.
|
06-04-2011, 11:34 AM | #3 |
Booooosted.
|
|
06-04-2011, 11:36 AM | #4 |
Voice Of The Voiceless
|
I think Junkman and his videos have pretty much outlined the process for you. You'll definitely want to invest in Adam's Polishes products and use those in conjunction with the PC. You'll need:
-Swirl and Haze Remover -Fine Machine Polish -Wax of your choice (Super Machine Wax - soon to be called Super Machine Sealant) -PC Pads (Orange, White, and black) get black if you are going to be getting Super Machine Wax Of course, you'll also need some Detail Spray to prime the pads. It wouldn't be a bad idea to invest in some quality microfiber towels as well.
__________________
|
06-04-2011, 11:43 AM | #5 |
Drives: A Gift From My Wife Join Date: Apr 2009
Location: Powder Springs, GA
Posts: 1,557
|
You aren't to far from me that I can't drive over there and put one of these down on you.
Besides, my '67 Camaro could benefit from a little PC work if that makes you happy. -Funk
__________________
2012 Convert 2SS/RS SW/IO LS3 - Build #1081
07/21/2011 - (3800) Order produced and vehicle is being prepared for shipping. 08/09/2011 - (4200) Shipped (vehicle is shipped to the dealer or interim point of delivery). 08/16/2011 - (5000) Vehicle has been delivered to dealer. 08/19/2011 - In my possession. Last edited by pnyklr; 06-04-2011 at 11:56 AM. |
06-04-2011, 11:50 AM | #6 | |
Booooosted.
|
Quote:
The vids I posted are from Junkman. Those will walk you right through it. It's pretty easy. And kinda fun. |
|
06-04-2011, 12:06 PM | #7 |
Drives: A Gift From My Wife Join Date: Apr 2009
Location: Powder Springs, GA
Posts: 1,557
|
__________________
2012 Convert 2SS/RS SW/IO LS3 - Build #1081
07/21/2011 - (3800) Order produced and vehicle is being prepared for shipping. 08/09/2011 - (4200) Shipped (vehicle is shipped to the dealer or interim point of delivery). 08/16/2011 - (5000) Vehicle has been delivered to dealer. 08/19/2011 - In my possession. |
06-04-2011, 12:15 PM | #8 | |
Booooosted.
|
Quote:
But WATCH THE VIDS. Gonna take about 45 minutes or so, but you HAVE to watch them. You'll be glad you did. |
|
06-04-2011, 12:16 PM | #9 | |
"Detailing Devil Dog"
Drives: 2001 Corvette Coupe Join Date: Jan 2010
Location: Louisville, KY
Posts: 2,730
|
Quote:
One thing that you haven't talked about is how you're going to avoid creating that damage in your paint again, after you fix it. Do you know? This is the voice of experience. Listen to him. One thing, it's going to take a lot longer than 45 minutes to watch them because you need to watch them about 3 times each.
__________________
"Marines - Making the other guy die for his country for over 200 years."
|
|
06-04-2011, 12:21 PM | #10 | |
Booooosted.
|
Quote:
I watched them about three times, but over the course of two years. I'm getting pretty good at it. I just suck at the smaller areas where the pads are too big to get. |
|
06-04-2011, 12:37 PM | #11 |
.
Drives: ... Join Date: Apr 2009
Location: Colorado
Posts: 1,380
|
Guys keep in mind that this isn't a Camaro it is a BMW and has a hard as rock clearcoat. Yes follow Junks videos but you may need something more agressive to get those out as that is pretty gnarly.
You might need to go in with M105 and M205 first to get those swirls out. I just do not see Adams getting that fixed by itself. |
06-04-2011, 12:46 PM | #12 | |
Drives: 2010 Cyber Grey 2SS/RS (L99) Join Date: Dec 2010
Location: Luling,LA.
Posts: 111
|
Quote:
|
|
06-04-2011, 01:20 PM | #13 | |
Drives: A Gift From My Wife Join Date: Apr 2009
Location: Powder Springs, GA
Posts: 1,557
|
Quote:
How about it Junkman, something a little more aggressive or will the Adams stuff be enough? In answer to your question about how to prevent it in the future. I am selling the car this summer. Just wanted to make it look pretty for a prospective buyer. -Funk
__________________
2012 Convert 2SS/RS SW/IO LS3 - Build #1081
07/21/2011 - (3800) Order produced and vehicle is being prepared for shipping. 08/09/2011 - (4200) Shipped (vehicle is shipped to the dealer or interim point of delivery). 08/16/2011 - (5000) Vehicle has been delivered to dealer. 08/19/2011 - In my possession. |
|
06-04-2011, 01:29 PM | #14 |
Booooosted.
|
I'm 99% sure Junkman will say it doesn't matter. I believe we've been down this road.
But let's wait and see. |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
What has broken on your new camaro? Why? And what did you do to fix it? | 2010 Bumblebee | Camaro Issues / Problems | Warranty Discussions | TSB and Recalls | 221 | 09-25-2013 11:10 AM |
Leather seats stretching: Dealer will fix. | tangorover | 5th Gen Camaro SS LS LT General Discussions | 58 | 07-29-2011 07:08 PM |
Does DRL ( non RS ) Mess with hids? how to fix it? | xpanda305x | Cosmetics and Lighting Modification Discussions | 13 | 06-03-2011 08:46 AM |
Fuse pull for low octane fuel fix | Kman 2011 ss | 5th Gen Camaro SS LS LT General Discussions | 11 | 03-30-2011 09:28 AM |