Body to door harness connector

[Salzmansam]

Long story short I am working on a 2012 Camaro Coupe (non convertible). Aftermarket vertical doors are installed on it and while replacing the shocks to hold the doors up, 2 wires pulled out of their pins in the body side connector causing the door locks and windows to not work.
The orange/white wire goes to the orange/white wire on the door connector side. I cannot figure out which pin the dark green wire goes into. The service manual says pin #4 and #16 are dark green but that is not the case. I have a U1530 code for communication.
Can someone take a picture of the backside of their driver door body harness?