ADM 603rwhp and 564rwtq TVS2300 Video - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Matt TuneTime · 09-09-2009, 01:11 PM

Quote:

Originally Posted by Codefive

How did the fuel system hold up? Did you modify it? if so, what did you do?
I've heard that once you get around 600-ish RWHP, the car runs out of fuel pressure.

They don't ... See below

Quote:

Originally Posted by ADM PERFORMANCE

We put a kenne bell boost a pump on all of our magnacharger builds.

Andy

Right ... Nice Build Andy

Quote:

Originally Posted by ADM PERFORMANCE

Your out of injector(Ls9) at 600rwhp.

Yes sir ...

ADM PERFORMANCE · 09-09-2009, 07:44 PM

Quote:

Originally Posted by Matt TuneTime

They don't ... See below

Right ... Nice Build Andy

Yes sir ...

Thanks Matt....

Andy

Streetking · 09-09-2009, 08:09 PM

Quote:

Originally Posted by PoleCat2SSRS2010

All that torque and hp still make me wonder about the rest of the drive train. I have already heard of M6s rolling over the teeth on their synchros.
I still believe that A6s will need the 5 pinion planetaries, improved sprags, clutch packs and a multi disc converter to withstand the greater plans.

And by the way, who ordered al dente' or is that a Enzo sandwich between the American cars? Just kidding, good work.

I wish, just a F430..

SW

hot ss · 09-10-2009, 03:17 PM

just....

my buddy has a new one he keeps at his summer lake house....

i luvs the paddles way better than the camaro's.

ADM PERFORMANCE · 09-17-2009, 09:29 PM

Just a little change to the 2010 Camaro owned by SW in Austin TX.

SW wanted a little chop to go with his beautiful Black Camaro as well as a 100% pump gas setup with slightly less boost.

Here is what we ended up with after the new cam and 2 dyno pulls later:

New Cam and tune,updated ADM Intake system,7.5 psi ,Pump gas

Original setup ADM Intake system,9-10+ psi , 100 octane

http://s281.photobucket.com/albums/k...t=DSCF1491.flv

Very good sound out of this car...Idles at 850

ANDY

Streetking · 09-17-2009, 10:04 PM

Quote:

Originally Posted by ADM PERFORMANCE

Just a little change to the 2010 Camaro owned by SW in Austin TX.

SW wanted a little chop to go with his beautiful Black Camaro as well as a 100% pump gas setup with slightly less boost.

Here is what we ended up with after the new cam and 2 dyno pulls later:

New Cam and tune,updated ADM Intake system,7.5 psi ,Pump gas

Original setup ADM Intake system,9-10+ psi , 100 octane

http://s281.photobucket.com/albums/k...t=DSCF1491.flv

Very good sound out of this car...Idles at 850

ANDY

Damn Andy, can't wait to get it back tomorrow! The only problem I see is, I wanted less torque down low.. I guess I can live with it.

SW

Crowley · 09-19-2009, 06:46 PM

its a monster

Z_Rocks · 09-19-2009, 07:10 PM

Quote:

Originally Posted by Streetking

Damn Ansy, can't wait to get it back tomorrow! The only problem I see is, I wanted less torque down low.. I guess I can live with it.

SW

SW, I think you would be the best person to ask this question. Having a ZR1 (LS9 + TVS2300) and Camaro (LS3 + TVS2300), which feels stronger in power delivery? That was a very smart move bringing the tune down to 93 octane and less boost. Much safer!

Streetking · 09-19-2009, 08:02 PM

Quote:

Originally Posted by Z_Rocks

SW, I think you would be the best person to ask this question. Having a ZR1 (LS9 + TVS2300) and Camaro (LS3 + TVS2300), which feels stronger in power delivery? That was a very smart move bringing the tune down to 93 octane and less boost. Much safer!

The ZR1 feels faster because its alot lighter than the Camaro. I have been driving the Camaro around and cannot believe how fast it is and how much fun it is to drive. It blows the 315s through second gear. I am hooked on this car and we are not done with it, but for now I want to drive it for a while and send Andy the ZR1. We are making plans for it now.

SW

Crowley · 09-19-2009, 08:17 PM

Quote:

Originally Posted by Streetking

The ZR1 feels faster because its alot lighter than the Camaro. I have been driving the Camaro around and cannot believe how fast it is and how much fun it is to drive. It blows the 315s through second gear. I am hooked on this car and we are not done with it, but for now I want to drive it for a while and send Andy the ZR1. We are making plans for it now.

SW

Can't wait to see what you all are going to do to it!

Crowley

ADM PERFORMANCE · 09-19-2009, 09:14 PM

Yeah yeah yeah!!!!!!

We will be upgrading the Camaro and the ZR-1 to much higher standards ......A little birdie told me 700 rwhp is a nice round number,but we will see.

Andy

Z_Rocks · 09-19-2009, 09:49 PM

Quote:

Originally Posted by Streetking

I am hooked on this car SW

This is a great testimonial from someone who has all these great and fast cars. Someone from GM should put you and your cars in their advertising.

Your frank opinion is very much appreciated when you're not barging about your Ferrari, GT, ZR1 and Beemers and not putting down Camaro!

tsnow · 09-20-2009, 05:22 AM

How about a sound bite of the lumpity lump at idle with the new cam! Would love to hear it.

Windy City · 09-20-2009, 10:51 AM

Did you guys keep the stock internals on this motor? Any drivetrain upgrades?

09-10-2009, 03:17 PM	#46
hot ss Drives: aqua 2ss l99 Join Date: Jun 2009 Location: Edmonton Posts: 1,215	just.... my buddy has a new one he keeps at his summer lake house.... i luvs the paddles way better than the camaro's. __________________ May your exhaust note, sing in harmony with your blower.

09-17-2009, 09:29 PM	#47
ADM PERFORMANCE Drives: Anything I want Join Date: Oct 2008 Location: DfW - Texas Posts: 5,405	ADM Stage 2 Blower cam makes same power less boost Just a little change to the 2010 Camaro owned by SW in Austin TX. SW wanted a little chop to go with his beautiful Black Camaro as well as a 100% pump gas setup with slightly less boost. Here is what we ended up with after the new cam and 2 dyno pulls later: New Cam and tune,updated ADM Intake system,7.5 psi ,Pump gas Original setup ADM Intake system,9-10+ psi , 100 octane http://s281.photobucket.com/albums/k...t=DSCF1491.flv Very good sound out of this car...Idles at 850 ANDY

09-19-2009, 06:46 PM	#49
Crowley Okie doke Drives: 2012 GT500 Join Date: Sep 2008 Location: McKinney Texas Posts: 3,568 View My Garage	its a monster __________________

09-19-2009, 09:14 PM	#53
ADM PERFORMANCE Drives: Anything I want Join Date: Oct 2008 Location: DfW - Texas Posts: 5,405	More ,More ,More!!!!!!!! Yeah yeah yeah!!!!!! We will be upgrading the Camaro and the ZR-1 to much higher standards ......A little birdie told me 700 rwhp is a nice round number,but we will see. Andy

09-20-2009, 10:51 AM	#56
Windy City Drives: Not enough room here! Join Date: Jul 2009 Location: Plainfield, IL Posts: 1,017	Did you guys keep the stock internals on this motor? Any drivetrain upgrades? __________________ BEWARE OF THE LPE BROTHERHOOD! Remember: You can sleep in your car, but you can't drive your house!

09-20-2009, 05:22 AM	#55
tsnow Drives: 12' ZL1, AGM 6M Join Date: Jun 2009 Location: 49th state Posts: 249	How about a sound bite of the lumpity lump at idle with the new cam! Would love to hear it.