What Did You Do To Your Camaro Today? - Page 1717 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

romcjr · 03-19-2021, 06:18 PM

Added these and like the color similarity . Much better than the blue and yellow ...

Vegas Bound · 03-19-2021, 07:13 PM

Replaced the hood strut. Original finally gave out after 8.5 years.

Silent_Edge · 03-20-2021, 01:19 AM

Washed it, clayed it, used some ultimate compound, then waxed it. Unfortunately, it's not a garage car, so it sat out and took the elements like a champ. Back to form again. It's about ready for summer, but I'm already dreading what the pollen is going to do to it with all that crap flying around.

romcjr · 03-20-2021, 05:48 PM

I'm playing catch up with you guys . I installed the Elite Engineering catch can I received today . Need to adjust it a bit so the engine cover sets back down properly . Relatively easy install , once I figured out how to remove the clips on the oem hose .
Also installed the door pull handle insert that a coworker pointed out was missing .

romcjr · 03-21-2021, 05:49 PM

Covered it as our cats think it is a good spot to lay and get warm .

joekono · 03-21-2021, 09:19 PM

Boring but the most important, changed the oil. While at it, did the differential fluid. First bath tomorrow!!!

kburlar · 03-23-2021, 08:41 AM

I applied a coat of this. It was extremely quick and easy. And the shine is out of this world.

Flhchaz · 03-24-2021, 07:31 AM

Drove it to work!

romcjr · 03-26-2021, 06:27 AM

Not whai I did , but what I want to do . I can't seem to find a blacked out rear bowtie for my car . I found the front on ebay , but the rear ones I find seem to skip the 2014 / 15 year models . Any ideas from the braintrust here ? Thanks for the help .
fyi , I tried the vinyl inserts and they seem cheesy and don't stick well .

0stones0 · 03-26-2021, 06:49 AM

A piece of self stick black vinyl. Easy to do.

romcjr · 03-26-2021, 07:29 AM

Quote:

Originally Posted by 0stones0

A piece of self stick black vinyl. Easy to do.

That's what the pic shows , stick on black vinyl , doesn't stick well and looks cheesy ....

Vegas Bound · 03-26-2021, 07:43 AM

Quote:

Originally Posted by romcjr

Not whai I did , but what I want to do . I can't seem to find a blacked out rear bowtie for my car . I found the front on ebay , but the rear ones I find seem to skip the 2014 / 15 year models . Any ideas from the braintrust here ? Thanks for the help .
fyi , I tried the vinyl inserts and they seem cheesy and don't stick well .

Buy a new one and a rattle can of paint. Do it yourself. I also did the light bezels and later the SS badge.

redcoats1976 · 03-26-2021, 08:02 AM

Quote:

Originally Posted by romcjr

Not whai I did , but what I want to do . I can't seem to find a blacked out rear bowtie for my car . I found the front on ebay , but the rear ones I find seem to skip the 2014 / 15 year models . Any ideas from the braintrust here ? Thanks for the help .
fyi , I tried the vinyl inserts and they seem cheesy and don't stick well .

use a sheet of self stick vinyl but heat it with a hair dryer so it will conform to the surface better.let it cool,then cut with a sharp razor.i did mine last month and it took some trial and error to find this method.

RupertPupkin · 03-26-2021, 08:16 AM

Quote:

Originally Posted by romcjr

Not whai I did , but what I want to do . I can't seem to find a blacked out rear bowtie for my car . I found the front on ebay , but the rear ones I find seem to skip the 2014 / 15 year models . Any ideas from the braintrust here ? Thanks for the help .
fyi , I tried the vinyl inserts and they seem cheesy and don't stick well .

Home Depot. Can of plasti dip. Tape it, spray it, call it a day

03-19-2021, 06:18 PM	#24025
romcjr Drives: Two 1984 Z28 / 2014 2SS/RS AGM L99 Join Date: Feb 2021 Location: WALLER , TEXAS Posts: 253 View My Garage	Added these and like the color similarity . Much better than the blue and yellow ... Attached Images

03-21-2021, 05:49 PM	#24029
romcjr Drives: Two 1984 Z28 / 2014 2SS/RS AGM L99 Join Date: Feb 2021 Location: WALLER , TEXAS Posts: 253 View My Garage	Covered it as our cats think it is a good spot to lay and get warm . Attached Images

03-21-2021, 09:19 PM	#24030
joekono Drives: Camaro Convertible 2014 1LT Join Date: May 2019 Location: New Jersey Posts: 1,013 View My Garage	Boring but the most important, changed the oil. While at it, did the differential fluid. First bath tomorrow!!! __________________

03-23-2021, 08:41 AM	#24031
kburlar Drives: 2010 Camaro 2SS Join Date: Jul 2018 Location: Connecticut Posts: 183	I applied a coat of this. It was extremely quick and easy. And the shine is out of this world. Attached Images __________________ 2010 Camaro 2SS. Summit White. 1 7/8" 304 Dynatech Stainless Headers with High Flow Cats and Ceramic Coating, Cold Air Inductions Intake System with Scoop, SCT X3 Programmer, Moroso Catch Can, Heater Hose Upgrade 3.91 Gears, Eaton TrueTrac Posi, Billet Main Caps, Ported Throttle Body 1LE Suspension. ZL1 Springs, 2.9L Whipple Ssupercharger

03-26-2021, 06:27 AM	#24033
romcjr Drives: Two 1984 Z28 / 2014 2SS/RS AGM L99 Join Date: Feb 2021 Location: WALLER , TEXAS Posts: 253 View My Garage	Not whai I did , but what I want to do . I can't seem to find a blacked out rear bowtie for my car . I found the front on ebay , but the rear ones I find seem to skip the 2014 / 15 year models . Any ideas from the braintrust here ? Thanks for the help . fyi , I tried the vinyl inserts and they seem cheesy and don't stick well . Attached Images

03-19-2021, 07:13 PM	#24026
Vegas Bound Account Suspended Drives: 2013 Sparkly Red One Join Date: Dec 2018 Location: Hospitality State Posts: 2,558	Replaced the hood strut. Original finally gave out after 8.5 years.

03-20-2021, 01:19 AM	#24027
Silent_Edge Drives: 2010 2LT Camaro Join Date: Mar 2017 Location: Evergreen State Posts: 29	Washed it, clayed it, used some ultimate compound, then waxed it. Unfortunately, it's not a garage car, so it sat out and took the elements like a champ. Back to form again. It's about ready for summer, but I'm already dreading what the pollen is going to do to it with all that crap flying around.

03-20-2021, 05:48 PM	#24028
romcjr Drives: Two 1984 Z28 / 2014 2SS/RS AGM L99 Join Date: Feb 2021 Location: WALLER , TEXAS Posts: 253 View My Garage	I'm playing catch up with you guys . I installed the Elite Engineering catch can I received today . Need to adjust it a bit so the engine cover sets back down properly . Relatively easy install , once I figured out how to remove the clips on the oem hose . Also installed the door pull handle insert that a coworker pointed out was missing .

03-24-2021, 07:31 AM	#24032
Flhchaz Drives: 2015 ls, 2015 Silverado LTZ Join Date: Jun 2020 Location: Pittsburgh Posts: 60	Drove it to work!

03-26-2021, 06:49 AM	#24034
0stones0 It don’t come easy. Drives: 2010 2SS RS M6 Join Date: May 2014 Location: WI Posts: 2,206 View My Garage	A piece of self stick black vinyl. Easy to do. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 07:33 PM
Major Pedders Event in Houston! Saturday, Jan 30th! Meet DMS	Info@PeddersUSA.com	USA - Texas	39	02-01-2010 12:48 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 06:56 PM