04-07-2020, 09:25 PM | #1 |
Drives: 2014 z28, 2017 zl1, 2013-14 zl1s Join Date: Mar 2018
Location: Chicago
Posts: 94
|
Aftermarket Heat exchanger question
Do u guys get them with fans or without ? Has anyone used the nitrous spray bar that’s made to spray the heat exchanger? Does the nitrous mess up the heat exchanger ? Are the fan worth getting with let’s say the AFCO heat exchanger ?
|
04-07-2020, 10:02 PM | #2 |
Account Suspended
Drives: 2013 Sparkly Red One Join Date: Dec 2018
Location: Hospitality State
Posts: 2,558
|
I have a Ron Davis, no fans, no nitrous. Works great.
|
04-07-2020, 10:32 PM | #3 |
Account Suspended
Drives: 2012 2SS CAMARO 45th Join Date: Apr 2011
Location: St. Charles, IL
Posts: 18,663
|
Nitrous might work but with nitrous prices today that might not be worth it. If you do a lot of drag racing the fans are nice. You can run them in the staging lanes with the car off if you wire them right. The Afco heat exchanger by itself is a great mod. Pair that up with a reservoir and you're set. The most important thing in cooling is making sure the system is filled properly. We find a lot of cars low on fluid. I see you're local. If you need an install or any of the parts hit us up.
|
04-08-2020, 11:11 AM | #4 |
Drives: ZL1 Join Date: Dec 2016
Location: New Orleans
Posts: 261
|
I am running the one from Livernois without fans and have a reservoir also. It works great even for drag racing in the hot humid down here.
|
04-08-2020, 03:26 PM | #5 |
Drives: 2012 ZL1 Join Date: Apr 2015
Location: Kitchener ON, Canada
Posts: 176
|
I have the afco with fans and the rotofab reservoir, I have it all wired up to run the pump and fans with the ignition off, works great!!!!
__________________
2012 ZL1 preproduction car #13 ROTO-FAB intake / IC reservoir , 2.85" upper , ported inlet |
04-09-2020, 11:14 PM | #6 |
1000hp is NEVER Enough!
|
Intercooler
I used the KDI 4" thick intercooler and made my own reservoir. I feel that the fans work better for drag cars, no need for them on a street car. But the reservoir is a must! The KDI intercooler was easy to install and I liked the fact it has a air bleed port, I fitted a permanent hose to it from the reservoir.
|
04-10-2020, 07:45 PM | #7 |
Drives: 94 impala ss 396 6spd Join Date: Dec 2011
Location: melbourne fl
Posts: 84
|
Hey now,
Will a 09 - 15 ctsv with a lsa after market heat exchanger fit in a 13 zl1? I have a l ctsv weapon x heat exchanger but have no idea if they are interchangeable with a zl1. Thanks
__________________
dave
13 ZL1 12w7 plus a few other things |
04-10-2020, 11:01 PM | #8 | |
1000hp is NEVER Enough!
|
Thank You
Quote:
https://www.camaro5.com/forums/showthread.php?t=571243 . |
|
|
|
|
|