04-05-2022, 09:13 PM | #1 |
Drives: 2013 IOM 2SS/RS 2.9 Whipple Join Date: Sep 2013
Location: Auburn NH
Posts: 64
|
Rotary SPOA10
Hi, I’m in need of some dimensions that I just can’t seem to find. I am looking for the outside of post to outside of post dimension. I have overall, drive through,etc but need that 1 to figure out placement of carrier beams in the ceiling. I’m hoping to have the lift post come next to the beam as opposed to under to save on ceiling height. Sooner I can figure this out the sooner I can order steel beams. Thanks
|
04-06-2022, 09:26 AM | #2 |
Drives: 2015 SW 2SS 1LE Join Date: Jan 2018
Location: 78155
Posts: 308
|
I just measured mine at eye level. 128 1/4" I would make it a little wider span, just in case. BTW, mine is 138" over all at the base plates. Hope this helps
__________________
Maggie 2650 @ 18psi/ 75mm 10 rib/ Dual alky nozzles/ Roto-fab/ ARH 2" Lt's/ GT-12 cam/ ZL1 3.23 Conv./MGW/RPS triple carbon clutch/RSG tranny upgrage/Pedders Ex. XA w/ remote cans and a lot of other crap 897/8??@tires
|
04-06-2022, 12:58 PM | #3 |
Drives: 2013 IOM 2SS/RS 2.9 Whipple Join Date: Sep 2013
Location: Auburn NH
Posts: 64
|
Thank you. That helps a ton. I’ll have to double check but I believe that gives me plenty of room to set it inside the beam instead of under. How do you like the lift?
|
04-06-2022, 03:43 PM | #4 |
Drives: 2015 SW 2SS 1LE Join Date: Jan 2018
Location: 78155
Posts: 308
|
Love it! So do all my friends and family. I didn't hard wire mine. I used a RV extension cord and plug it into my 220v welder plug close by.
__________________
Maggie 2650 @ 18psi/ 75mm 10 rib/ Dual alky nozzles/ Roto-fab/ ARH 2" Lt's/ GT-12 cam/ ZL1 3.23 Conv./MGW/RPS triple carbon clutch/RSG tranny upgrage/Pedders Ex. XA w/ remote cans and a lot of other crap 897/8??@tires
|
04-06-2022, 07:19 PM | #5 |
Drives: 2013 IOM 2SS/RS 2.9 Whipple Join Date: Sep 2013
Location: Auburn NH
Posts: 64
|
That’s good to hear. I miss having a garage with a lift. Hopefully lumber prices start dropping so I can start framing. It looks like you’ve got good tastes, Camaros and guns. I love the 1911’s. Best looking gun out there. I guess my collection of a dozen or so speaks to that.
|
|
|
|
|