7lbs vs 9lbs dyno and a few other changes (TVS 2300) - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Crowley · 03-10-2010, 08:00 AM

I had ADM Performance do some work over the weekend. I had pfadt springs and swaybars installed, ADM Widened wheel package with Nitto INVO 315s on the back as well as a jump in boost from 7lbs to 9lbs .. First to the numbers:

VS RPM to show the broad TQ curve

I'll negate the little spike at the end and we will just call it 600rwhp and 554rwtq

..

If the weather is nice this weekend, I'll have some pics of the drop and widened wheels and I'll post them up. My first impression is that it make a big difference with the springs and swaybars. Very tight feeling. Ride quality isn't compromised at all either !! The stance is perfect IMO ..

Anyway ... just wanted to show some progress:

Next up, Stage II Cam (and larger injectors most likely) and LPE Clutch

Crowley

Barton Industries · 03-10-2010, 08:29 AM

Nice #'s How does the car feel with the added boost? 3.4 pulley?

2010 SSRS · 03-10-2010, 08:43 AM

nice

Crowley · 03-10-2010, 08:46 AM

Quote:

Originally Posted by Barton Industries

Nice #'s How does the car feel with the added boost? 3.4 pulley?

Correct, went to a 3.4 pulley. I have gotten on it a little since the upgrade and it feels really smooth and gets you going very quick (even compared to my numbers at 7lbs). I'm glad I went with wider tires in the back, because I really needed them

Crowley

600hp-lpe · 03-10-2010, 08:47 AM

Nice improvement Crowley!

Speed74SS · 03-10-2010, 08:49 AM

Nice jump in power and you will love the suspension mods more and more after driving it a while. A cam will be awesome as well. Nice car and kudo's to ADM on the build as well.

Barton Industries · 03-10-2010, 08:53 AM

Quote:

Originally Posted by Crowley

Correct, went to a 3.4 pulley. I have gotten on it a little since the upgrade and it feels really smooth and gets you going very quick (even compared to my numbers at 7lbs). I'm glad I went with wider tires in the back, because I really needed them

Crowley

Tires are next on my list too. The car spins more in 2ng gear at 45mph then it did in 1st gear stock. Gotta love the Maggie. Let me know how the wider tires do.

obzidian · 03-10-2010, 09:29 AM

Nice gains!

I've driven a camaro with similar suspension mods and I agree 100% on how well these cars handle with just a springs and sways installed.

*radz28* · 03-10-2010, 10:00 AM

Forgive me for fogetting, but did you already have a Stage 1 Cam in there? Also, are these just widened rear wheels?

Thanks, and GREAT numbers

Crowley · 03-10-2010, 10:15 AM

Quote:

Originally Posted by radz282003

Forgive me for fogetting, but did you already have a Stage 1 Cam in there? Also, are these just widened rear wheels?

Thanks, and GREAT numbers

Correct, I have the ADM stage 1 cam in there.

So currently my full mod list is:

TVS 2300 @ 9lbs
ADM Performance CAI (Street version)
ADM Stage 1 blower cam
ADM Boost guage
ARH Longtubes w/ cats
3" Magnaflow catback
BMR Trailing Arms
PFADT Springs and Swaybars
ADM Widened wheel package (315 Nittos out back)
MGW Shifter

I think I got them all.

Thanks,
Crowley

*radz28* · 03-10-2010, 10:18 AM

Nice

Thanks for getting me back up to speed. What are you shooting for next?

Crowley · 03-10-2010, 10:21 AM

Quote:

Originally Posted by radz282003

Nice

Thanks for getting me back up to speed. What are you shooting for next?

I'm hoping stage II Blower cam and a little lower boost (to be a bit nicer to the engine ) but gain around 20hp/tq at the wheels .. Plus that clutch and some injector upgrades to keep things stable.

Crowley

navyblueSS · 03-10-2010, 10:30 AM

Nice improvement.

thenaz · 03-10-2010, 10:46 AM

Please, Show us some pictures of the rear and side. Sounds like it is awesome!!!

03-10-2010, 08:00 AM	#1
Crowley Okie doke Drives: 2012 GT500 Join Date: Sep 2008 Location: McKinney Texas Posts: 3,568 View My Garage	7lbs vs 9lbs dyno and a few other changes (TVS 2300) I had ADM Performance do some work over the weekend. I had pfadt springs and swaybars installed, ADM Widened wheel package with Nitto INVO 315s on the back as well as a jump in boost from 7lbs to 9lbs .. First to the numbers: VS RPM to show the broad TQ curve I'll negate the little spike at the end and we will just call it 600rwhp and 554rwtq .. If the weather is nice this weekend, I'll have some pics of the drop and widened wheels and I'll post them up. My first impression is that it make a big difference with the springs and swaybars. Very tight feeling. Ride quality isn't compromised at all either !! The stance is perfect IMO .. Anyway ... just wanted to show some progress: Next up, Stage II Cam (and larger injectors most likely) and LPE Clutch Crowley __________________ Last edited by Crowley; 03-11-2010 at 04:16 PM.

03-10-2010, 08:49 AM	#6
Speed74SS Drives: 2010 LPE 650+ CTS-V Join Date: Oct 2008 Location: Sioux Falls, SD Posts: 1,640	Nice jump in power and you will love the suspension mods more and more after driving it a while. A cam will be awesome as well. Nice car and kudo's to ADM on the build as well. __________________ '10 CTS-V : LPE 650+ Package 587hp / 582tq 2.55 Upper / 8.6 Lower / ID850's / Kooks Longtubes / New Era CAI

03-10-2010, 09:29 AM	#8
obzidian Drives: 98 camaro turbo Join Date: Nov 2009 Location: miami Posts: 293	Nice gains! I've driven a camaro with similar suspension mods and I agree 100% on how well these cars handle with just a springs and sways installed. __________________ .....

03-10-2010, 10:00 AM	#9
radz28 Petro-sexual Drives: Ultra-Grin Join Date: Oct 2006 Location: Crazy Coast Posts: 15,201 View My Garage	Forgive me for fogetting, but did you already have a Stage 1 Cam in there? Also, are these just widened rear wheels? Thanks, and GREAT numbers __________________ '20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs

03-10-2010, 10:18 AM	#11
radz28 Petro-sexual Drives: Ultra-Grin Join Date: Oct 2006 Location: Crazy Coast Posts: 15,201 View My Garage	Nice Thanks for getting me back up to speed. What are you shooting for next? __________________ '20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs

03-10-2010, 08:29 AM	#2
Barton Industries Drives: 2010 Camaro SS Join Date: Sep 2009 Location: Cortland NY Posts: 437	Nice #'s How does the car feel with the added boost? 3.4 pulley?

03-10-2010, 08:43 AM	#3
2010 SSRS Drives: 3 V8 Camaros Join Date: May 2009 Location: The Ocean State Posts: 111,187 View My Garage	nice

03-10-2010, 08:47 AM	#5
600hp-lpe Drives: 2010 Join Date: Jul 2009 Location: NH Posts: 4,788	Nice improvement Crowley!

03-10-2010, 10:30 AM	#13
navyblueSS Drives: 2002 Camaro SS Join Date: Jul 2009 Location: Quitman, LA Posts: 609	Nice improvement. __________________ 2015 1LE - CAI intake, TSP longtubes, NPP, Futral Motorsports tuned, BMR 1"lowering springs, BMR trailing arms

03-10-2010, 10:46 AM	#14
thenaz Thenaz Drives: 2010 2SS/RS BLK GFX IOI/STRIPE TVS Join Date: Jul 2009 Location: Arkansas Posts: 64 View My Garage	Please, Show us some pictures of the rear and side. Sounds like it is awesome!!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Roto-fab CAI dyno results	Roto-fab 1	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	102	07-30-2016 07:21 PM
G-FORCE TVS 2300 2010 Camaro w a little suprise!	Mike TexaSS	Forced Induction - V8	23	02-08-2010 10:37 PM
G-Force 2010 Camaro w TVS 2300 Vids and Dyno.	Mike TexaSS	Forced Induction - V8	8	11-17-2009 12:22 PM
another completed TVS 2300 621 RWHP / 583 RWTQ	21STCENTURY	Forced Induction - V8	26	11-13-2009 12:01 PM
MagnaCharger TVS 2300 - What fuel injectors & pulley are supplied on standard model?	thenaz	Forced Induction - V8	7	11-03-2009 10:23 PM