03-23-2021, 05:40 PM | #1 |
Drives: 2013 SS LS3, NPP, Blk Join Date: Sep 2012
Location: Burlington, Ontario
Posts: 60
|
1LE kit shock replacement
Hey guys, I purchased the 1le suspension kit for my 13 ss. I took apart the old shock assembly and have it put back together with the new shock and mount.
I took a bunch of photos, but when I pulled off the plastic cover the bump stop was wedged inside and I did not see the direction. I feel like this is a stupid question, but I just want to make sure I have the bump stop pointed in the right direction. It makes a slight cone shape, I have the wider part at the bottom. I am hoping someone knows if this is the right orientation, the assembly drawing that came from the kit is not clear.
__________________
1LE Suspension Kit, 1LE Strut Brace, dynosteve tune, K&N Typhoon CAI, Goodridge SS Brake Lines, JLT 2.0 Catch Can, NPP Exhaust Mod
|
03-24-2021, 09:35 PM | #2 |
Drives: 2013 SS LS3, NPP, Blk Join Date: Sep 2012
Location: Burlington, Ontario
Posts: 60
|
After doing some digging, I found this on a Phastek video.
Looks like the cone points down. Hopefully this will help someone out in the future!
__________________
1LE Suspension Kit, 1LE Strut Brace, dynosteve tune, K&N Typhoon CAI, Goodridge SS Brake Lines, JLT 2.0 Catch Can, NPP Exhaust Mod
|
|
|
|
|