11-19-2020, 04:20 PM | #617 |
Drives: 12 camaro ss, 72 chevelle, 91camaro Join Date: Dec 2013
Location: findlay,oh
Posts: 2,069
|
Got the tires today and mounted them up. Surprisingly the wheels fit on my machine and they beaded right up with a cheetah.
Side by side with old wheels/tires
__________________
12 camaro ss 427lsx, th400, f310 heads, crower shaft mounts, gpi specd solid roller, shearerfab 2k hp a/w, twin bullseye 88mm turbos, hughes pro ssx bolt together converter, holley dominator, 8.50 cert, backhalf, Ford 9", 33x17x16 tires, c16 fuel
|
11-20-2020, 08:00 AM | #618 |
Drives: 2010 SS L99 Join Date: Sep 2018
Location: Missouri
Posts: 1,635
|
What did you do with your collector tethers lugs?
__________________
Previous PB:11.079 @ 122.99mph.. New setup time: TBD
The 11.079 pass: https://youtu.be/pz27Zq54t_E Build thread - www.camaro5.com/forums/showthread.php?t=555371 |
11-20-2020, 10:49 AM | #619 |
Drives: 12 camaro ss, 72 chevelle, 91camaro Join Date: Dec 2013
Location: findlay,oh
Posts: 2,069
|
I've got them i just have to change the 3" studs out for 2s. The hubs on these wheels are much thinner. And this was just for a quick mock up
__________________
12 camaro ss 427lsx, th400, f310 heads, crower shaft mounts, gpi specd solid roller, shearerfab 2k hp a/w, twin bullseye 88mm turbos, hughes pro ssx bolt together converter, holley dominator, 8.50 cert, backhalf, Ford 9", 33x17x16 tires, c16 fuel
|
11-21-2020, 07:20 AM | #620 |
|
Those fill the wheel wells up nicely, looks much better.
|
11-26-2020, 07:41 PM | #621 |
Drives: 12 camaro ss, 72 chevelle, 91camaro Join Date: Dec 2013
Location: findlay,oh
Posts: 2,069
|
So for sh$&s and giggles I bought 2 raffle tickets for a billet 80mm forced performance turbo and ill be damned i won it lmao. A $2050 turbo for $50. Stoked and it should be here next week.
Sending the 94 out tomorrow to crt turbo to be rebuilt as the 98. Talked to the local fab shop and ill be taking it after the first of the year to tweak hot/cold side.
__________________
12 camaro ss 427lsx, th400, f310 heads, crower shaft mounts, gpi specd solid roller, shearerfab 2k hp a/w, twin bullseye 88mm turbos, hughes pro ssx bolt together converter, holley dominator, 8.50 cert, backhalf, Ford 9", 33x17x16 tires, c16 fuel
|
11-26-2020, 09:20 PM | #622 |
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,690
|
Dude, that is great... someday, I’ll hope to be as lucky ;o)
-Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
12-11-2020, 09:10 AM | #623 |
Drives: 12 camaro ss, 72 chevelle, 91camaro Join Date: Dec 2013
Location: findlay,oh
Posts: 2,069
|
Got an update from midwest turbo. Cover cleaned up nicely. Should ship out today or Monday they say.
Lost the spacer and going to give hood dumps a shot this coming season. Should clear a hood now I hope.
__________________
12 camaro ss 427lsx, th400, f310 heads, crower shaft mounts, gpi specd solid roller, shearerfab 2k hp a/w, twin bullseye 88mm turbos, hughes pro ssx bolt together converter, holley dominator, 8.50 cert, backhalf, Ford 9", 33x17x16 tires, c16 fuel
Last edited by ttshovel; 12-11-2020 at 08:18 PM. |
01-03-2021, 09:16 PM | #624 |
Drives: 12 camaro ss, 72 chevelle, 91camaro Join Date: Dec 2013
Location: findlay,oh
Posts: 2,069
|
Been a few weeks since I've updated. Got the turbo back and will he taking the car this week to the fab shop to get all the piping tweaked.
Finally got enough saved up and ordered the dominator ecu, holley can bus egt box, holley NTK o2 sensor, hotside/coldaide parts for fab shop, all the sensors/wiring stuff to finish the car, and a fresh set of plugs. As soon as I get it back from the fab shop I will be wiring it, flushing fuel system, and getting it ready for the dyno. The guy that has been tuning it will continue to tune it and we will go to another shop to use a dyno my car will fit on. Excited to see what the car will make now with the bigger turbo/tighter converter
__________________
12 camaro ss 427lsx, th400, f310 heads, crower shaft mounts, gpi specd solid roller, shearerfab 2k hp a/w, twin bullseye 88mm turbos, hughes pro ssx bolt together converter, holley dominator, 8.50 cert, backhalf, Ford 9", 33x17x16 tires, c16 fuel
|
01-06-2021, 06:51 PM | #625 |
Drives: 12 camaro ss, 72 chevelle, 91camaro Join Date: Dec 2013
Location: findlay,oh
Posts: 2,069
|
Got the charger mounted. Dominator and all the rest of the stuff showed up. The weld on burst panel plate is like triple the size of the one that was on the spacer so im just going to not have one
__________________
12 camaro ss 427lsx, th400, f310 heads, crower shaft mounts, gpi specd solid roller, shearerfab 2k hp a/w, twin bullseye 88mm turbos, hughes pro ssx bolt together converter, holley dominator, 8.50 cert, backhalf, Ford 9", 33x17x16 tires, c16 fuel
Last edited by ttshovel; 01-07-2021 at 07:45 PM. |
01-09-2021, 06:19 PM | #626 |
Drives: 12 camaro ss, 72 chevelle, 91camaro Join Date: Dec 2013
Location: findlay,oh
Posts: 2,069
|
Dropped the car off first thing this morning and not even 8 hours later hes sending me updates. Got the charge pipe all cut down. Now just needs to tweak hotside and add the vbands. He said by the end of the week I can pick it up
__________________
12 camaro ss 427lsx, th400, f310 heads, crower shaft mounts, gpi specd solid roller, shearerfab 2k hp a/w, twin bullseye 88mm turbos, hughes pro ssx bolt together converter, holley dominator, 8.50 cert, backhalf, Ford 9", 33x17x16 tires, c16 fuel
|
01-11-2021, 07:49 PM | #627 |
Drives: 10 Procharged SS Join Date: Oct 2009
Location: The creek at the end of the dead end road
Posts: 1,857
|
Awesome!! Its getting close!
__________________
10 Camaro: Built 376, LSA Heads, BTR valve train and Stage III Camshaft. F1A 12 Rib-3.75 pulley (17psi), Squash Dual Fuel System with Return (Dual Walbro 450LPH on a Hobbs Switch), Aeromotive regulator, Holley Fuel Rails, ID1300's. RMVB 4L80, 4K Stall, and Trans-brake. 9" IRS, 3.50 gears with a full spool
|
01-11-2021, 09:22 PM | #628 |
2&THEHIT
Drives: 5th Gen Camaro; 5th Gen Ram 3500 Join Date: Mar 2018
Location: Garner, NC
Posts: 1,011
|
Great news! I know you’re excited
|
01-11-2021, 11:10 PM | #629 |
Drives: 12 camaro ss, 72 chevelle, 91camaro Join Date: Dec 2013
Location: findlay,oh
Posts: 2,069
|
Thanks guys! It most definitely is!
__________________
12 camaro ss 427lsx, th400, f310 heads, crower shaft mounts, gpi specd solid roller, shearerfab 2k hp a/w, twin bullseye 88mm turbos, hughes pro ssx bolt together converter, holley dominator, 8.50 cert, backhalf, Ford 9", 33x17x16 tires, c16 fuel
|
01-13-2021, 04:44 PM | #630 |
Drives: 12 camaro ss, 72 chevelle, 91camaro Join Date: Dec 2013
Location: findlay,oh
Posts: 2,069
|
Piping all fixed. Will be picking it up Saturday morning. We decided it needed a bump steer kit after talking about it toeing out as front end lifts. Ordered the kit from LSR. Hopefully this takes care of it or ill be back to limiting front end travel and setting toe with front raised and deal with the toe in at ride height
Will begin wiring this weekend. Wish me luck lol
__________________
12 camaro ss 427lsx, th400, f310 heads, crower shaft mounts, gpi specd solid roller, shearerfab 2k hp a/w, twin bullseye 88mm turbos, hughes pro ssx bolt together converter, holley dominator, 8.50 cert, backhalf, Ford 9", 33x17x16 tires, c16 fuel
|
|
|
Thread Tools | |
|
|