10-19-2009, 05:09 PM | #1 |
The Jersey Devil
|
z5 not coming off...
why isnt it coming off? i thought i didnt have to use that much elbow grease
__________________
--------------------------------------------------------------
'00, '10 Camaro 10/6/09! |
10-19-2009, 05:18 PM | #2 |
AAC Certified Installer
Drives: 2011 Mini Cooper S Convertible Join Date: Sep 2009
Location: Fort Worth
Posts: 145
|
talking about Zaino?
|
10-19-2009, 05:19 PM | #3 |
Whiskey Tango Foxtrot
Drives: 2010 Camaro 2SS-Imperial Blue Join Date: Sep 2009
Location: Charleston AFB, SC
Posts: 227
|
I believe I read an earlier post in which you said temps were down where you are at. Cold weather could cause this...
|
10-19-2009, 05:21 PM | #4 |
The Jersey Devil
|
do i just have to wait longer?
__________________
--------------------------------------------------------------
'00, '10 Camaro 10/6/09! |
10-19-2009, 05:42 PM | #5 |
The Jersey Devil
|
i really hope i didnt scratch the hell out of my car..
__________________
--------------------------------------------------------------
'00, '10 Camaro 10/6/09! |
10-19-2009, 05:56 PM | #6 |
Drives: 2010 VR 2SS/RS, M6, whitestrip Join Date: Jul 2009
Location: Palestine, TX
Posts: 165
|
Did u use the accelerator in the Z-5?
How long has it sat for? What is temps where u are at currently?
__________________
2010 VR 2SS/RS M6 w/ Arctic white stripes
# 33532! |
10-19-2009, 06:03 PM | #7 |
The Jersey Devil
|
used the accelerator...been sitting for like an hour and a half, but temps are starting to drop. should i start this over tomorrow?
__________________
--------------------------------------------------------------
'00, '10 Camaro 10/6/09! |
10-19-2009, 06:33 PM | #8 |
To All Veterans
Drives: 2010 2LT RS Inferno Orange Join Date: Sep 2009
Location: New Port Richey
Posts: 471
|
I read if you apply to much Z5 you will play h@#%* getting it off, I'd suggest using the Z6 finish spray to clear the Z5 off and redo. Use with just a hint of product coming off applicator pad. I use one strip diagonally across pad per body panel. never a problem with it. HTH
|
10-19-2009, 06:37 PM | #9 |
The Jersey Devil
|
i cant tell now that its night, but it almost looks like i added a ton of swirls to the paint...
__________________
--------------------------------------------------------------
'00, '10 Camaro 10/6/09! |
10-19-2009, 06:46 PM | #10 |
To All Veterans
Drives: 2010 2LT RS Inferno Orange Join Date: Sep 2009
Location: New Port Richey
Posts: 471
|
|
10-19-2009, 06:56 PM | #11 |
The Jersey Devil
|
now that i look at it in my garage...it looks like i mustve just missed a couple spots drying it when it was getting dark. thank god im off mondays and tuesdays.
__________________
--------------------------------------------------------------
'00, '10 Camaro 10/6/09! |
10-19-2009, 08:24 PM | #12 |
More human than human
|
at temps around 54 degrees you probably have to let it sit all day.
__________________
1100 - 10/22/2008 3000 - 05/27/2009 3300 - 06/06/2009 3800 - 06/29/2009 4B00 - 06/29/2009 Warehouse 13 survivor Blood stains,speed kills,fast cars,cheap thrills,rich women,fine wine,i lost my sense i lost control i lost my mind. |
10-19-2009, 08:28 PM | #13 |
|
You can let it sit overnight and wipe it off in the morning, if it's inside it won't be a problem, the longer it can sit the better
|
10-19-2009, 08:34 PM | #14 | |
Moderator
Drives: '99 Camaro SS #1392 Join Date: Jun 2006
Location: Newtown, Pa.
Posts: 3,982
|
Quote:
1. You used too much 2. It hasn't dried completely 3. The temps. in our area are not too ideal for using Zaino right now. The drying time is almost doubled right now. Did you use the ZFX? If you're able to, you can let it sit on the car. I've let Zaino sit on my SS, overnight, with no problems. Ed |
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Auto show is coming | Iroczlover | USA - Northwest / Pacific Northwest | 1 | 09-29-2009 01:15 AM |
BIG grudge match coming up | 69 Camaro 09 | Dragstrip and Launch Techniques Discussion | 18 | 08-01-2009 09:54 PM |
Next CAMARO5 meet/greet/cruise/hangout 7/25 | 67camaro99 | USA - California | 229 | 07-26-2009 02:07 PM |
ITS COMING ITS COMING | Iroczlover | USA - Northwest / Pacific Northwest | 7 | 11-19-2008 02:50 PM |