DIY: Installing steering wheel audio and phone controls on Camaro !

[GoldCartridgeGamer]

Installed mine over the weekend with help from this thread and this one:http://camaro5.com/forums/showthread.php?t=53852

Before I go to get my PDIM and the steering wheel programmed. Do any of you have the pdf/documentation about programming this? I have a feeling my dealer will have no idea. I already have the PDIM pdf/documentation and would like the one for the steering wheel as evidence so it can be done right.

So far have found this: http://www.camaro5.com/forums/showpo...27&postcount=2
Hope that's enough, but please feel free to share any info that might help just in case.

[Darth Martel]

All the info you people seek are contained in the pages of this thread.

[GoldCartridgeGamer]

Getting it and the PDIM programmed. They quoted me at 210+tax (labor & program fee).


Sent from my iPhone using Tapatalk

[CruznSS]

Thanks for write up. Replacing bezel for a friend and DIY info will help big time!

[CamaroLS]

Originally Posted by techsupport

as far as warranty goes the dealerships usually say it will block warranty for one of two reasons. one they have no idea to do what you are asking and two an aftermarket program will change warranty. Here is the beautiful thing about this the parts and program are gm. they cant say you messed up the bcm by installing their program. when the techline programs your car they write a new program to your vin. if and when you had a bcm go bad and got it replaced at any gm dealer when they went to replace and reprogram there wouldnt be an issue because it would reprogram for steering wheel controls without them doing anything it will already be part of your cars program from now on. with the bulletin i posted gm is admitting to letting you install this program. the reason warranty will not cover it and you have to pay for the program is because it is basically an accessory like a set of running boards on a truck or adding heated seat package supported by gm. you still have to pay for them and the install because there is nothing wrong with your vehicle. warranty issues are only covered if there is a defect or something wrong with your vehicle. the only thing wrong is that gm didnt offer this in the 1ss to begin with. hope that clears it up for you.

Just wanted to Thank You for the info and pics!! Great upgrade for the camaro.

[ghostrider2]

I read somewhere that you have to change out the onstar module for the bluetooth, is that correct?

[jeepguy_1980]

Originally Posted by ghostrider2

I read somewhere that you have to change out the onstar module for the bluetooth, is that correct?

Yes. The bluetooth, for phone call, is integrated into the OnStar module. The good news is that adding bt is very easy. The bad news is that it can be a pain getting OnStar to update your account.

[Nutmg14]

Libertyville Chevrolet in illinois quoted $140

[CamaroLS]

I got my wiring harness in the mail yesterday and installed my Bluetooth and radio controls on the steering wheel. Everything went smoothly and looks a lot better with controls on both sides of the steering wheel. Money well spent!! My next job is to buy and install the console gauges. Thanks for all the pictures & help!!

[ghostrider2]

sticky

[thoward57vsu]

I must say that the hardest part of this whole install was removing the airbag. I have installed the switch and the harness and now all I have to do is get the bcm programmed.

[Backlash]

Awesome write up, no problems with either install. Hopefully some dealer in the Cleveland area know how to program

[CamaroBlue]

Chevy dealer in Conroe, TX charges $250 for programming. $50 for tech support and $100/hr. for 2 hours of labor. Anyone know a place in Houston that has a more reasonable price?

[patrickt]

Originally Posted by CamaroBlue

Chevy dealer in Conroe, TX charges $250 for programming. $50 for tech support and $100/hr. for 2 hours of labor. Anyone know a place in Houston that has a more reasonable price?

That is insane!