06-22-2018, 09:58 AM | #1 |
Drives: 2014 IOM SS RS Join Date: Nov 2011
Location: kennewick,wa
Posts: 26
|
ZL1 caliper on SS rotors
I have a 2013 SS that I am planning on swapping the front caliper. I don't track and this used to be my daily driver but is now a weekend car. I got a ZL1 front calipers but could I just swap them and still use my SS rotor?
I know the Zl1 rotors are 14.6" and the SS are 14", but when I checked aftermarket vendors like EBC, they are at 14" diameter too for ZL1. So is it doable? |
06-22-2018, 12:49 PM | #2 |
Drives: cars Join Date: May 2011
Location: Oversneeze
Posts: 4,545
|
No.
|
06-22-2018, 02:31 PM | #3 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,062
|
Get you a set from a CTS-V off of Rock Auto.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
06-22-2018, 02:46 PM | #4 |
Instagram: Sangstah
|
SS and ZL1 rotors are completely different sizes so no it will not work.
__________________
2019 SS 1LE - "CaSSandra" 2014 SS - "AleSSandra - Sold" 94 Z28 - Sold
Follow the build https://www.camaro6.com/forums/showthread.php?t=612717 |
06-23-2018, 06:46 PM | #5 |
Drives: 2015 Camaro 1SS 6M Join Date: Dec 2017
Location: The Freeway
Posts: 238
|
Do the CTS-V calipers work well with the factory ABS? This sounds like a cost effective upgrade.
__________________
|
06-25-2018, 02:42 PM | #6 |
Drives: Camaro Join Date: Nov 2009
Location: Cerritos, CA
Posts: 882
|
You're able to use CTS-V rotors 09'-15' CTS-V rotors with those ZL1 calipers.
|
|
|
Thread Tools | |
|
|