2010-2014 Scosche 2.0 dash kit wiring

[mchaggis]

Originally Posted by fleebag

Kind of off topic but an issue I just had after installing the new 2.0.

Otherwise it was a pain to install but looks and works 100x better

I agree. Much better but what an ass to install. Worth it though!

[oslouie]

Originally Posted by mchaggis

I'm wanting to power both the front and rear cameras from a switched 12v supply so I can use them even if I'm not in reverse. I have the violet/white wire connected as a backup camera trigger wire and this works fine.

I also used the red wire that was in the video cable to bring the 12v+ to the HU area so I could power the cameras from this area.
Just a thought....... Maybe the blue wire might work? I'll test it tonight.

I installed a USB male to mini 5 pin male cable last night and this plugs directly into the back of the factory fitting that's in the console. It works great so that's sorted.

So far all seems to be working as it should except the heated seats and rear defrost buttons. Scosche have sent me instructions on a method to get these to work. They think it's a comms error and a reset might work. I'll let ya all know.

How long does this cable need to be? Would 3 feet be enough?

[mchaggis]

I doubt 3’ would be long enough. I got a 6’ long one and while it was too long i’m thinking 4 1/2’ might be about right.

[fleebag]

Sorry for threadjack lol

Can someone tell me the exact procedure on the programming for auto lock bs

This pos has locked me out twice now with engine running, lol

I turned off the auto feature but for some reason it locks?

Btw the Camaro doesn’t have any key slots for opening the car at all not even the trunk.
About the worst idea ever.
Even the new vettes have a key in rear.
Anyway that’s my rant
Otherwise very cool dash kit, just the operator error on my part I guess

Thanks

[Gordy87]

Never had any problems with mine, but read this thread.

http://www.google.com/url?sa=t&sourc...c4Dg14U6WZaXhe

[fleebag]

Originally Posted by Gordy87

Never had any problems with mine, but read this thread.

http://www.google.com/url?sa=t&sourc...c4Dg14U6WZaXhe

Thanks for the link!

[Gordy87]

Originally Posted by fleebag

Thanks for the link!

Any updates? Or you still fighting the loosing battle?

[mchaggis]

Originally Posted by Gordy87

Any updates? Or you still fighting the loosing battle?

How about you? How far are you through the lifetime long list of home improvements?

[Gordy87]

Originally Posted by mchaggis

How about you? How far are you through the lifetime long list of home improvements?

House is 99% complete. Few things I will go back to in the winter, after it cools down.

Audio system is +, with exception of the SWC. I will get them back once I buy my new HU and get rid of the loaner.

[mchaggis]

Good Effort! Hope you're clocking up some miles enjoying the heat.

[Maharam]

Has anyone figured out the SWC on the Kenwood yet?

[mchaggis]

I’ve just checked in here after a long time away. Did you get this sorted? Most of my SWC features work fine.