Edelbrock Supercharger, Help please - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

epstein · 03-20-2012, 09:54 PM

roto fab for e force and a rev extreme catch can ...what did u need to know

tjbusa · 03-20-2012, 11:24 PM

Thanks, epstein, that was it

tjbusa · 03-22-2012, 02:15 PM

Forgot about the JRE fuel system Upgrade, I will get that on order today along with the Rev Extreme catch can from Jannetty.

toesuf94 · 03-22-2012, 02:26 PM

I love mine!

tjbusa · 03-22-2012, 09:08 PM

Catch can is on backorder for 2 weeks. :(

ToolFan66 · 03-22-2012, 09:23 PM

Thanks for posting I was wondering what else would be needed for this install. I am getting a lot of work done around the house this spring and hope to do the same upgrade soon after..

Cpanthers85 · 03-23-2012, 11:32 AM

Quote:

Originally Posted by sscamaro

I'm glad you found one. I'm really happy with mine, except I was running out of fuel at 6500 rpm.

Next week i'll be installing a new ZL1 fuel pump and a Jennetty fuel rail upgrade kit. After that my tuner will install 72# injectors and retune it.

Why are you putting larger injectors in? I was told that the ZL1 fuel pump will work fine with the stock edelbrock injectors.

EDIT: Nevermind. I'm a dope and should have read your whole post. Hopefully, I don't run into this problem.

ROCrMH · 03-23-2012, 11:47 AM

I Just had the E-Force Edelbrock Kit#1598 installed last week@ Grabiak Performance Center. Looks good under the hood like it came from the factory. 6lb of boost,dyno was 575rwhp and 564 rwtq, I'm really pleased with the install, supercharger doesn't whistle or wine and is loaded with power.

SilverIceman · 03-23-2012, 02:42 PM

Quote:

Originally Posted by ROCrMH

I Just had the E-Force Edelbrock Kit#1598 installed last week@ Grabiak Performance Center. Looks good under the hood like it came from the factory. 6lb of boost,dyno was 575rwhp and 564 rwtq, I'm really pleased with the install, supercharger doesn't whistle or wine and is loaded with power.

Wow, pretty good dyno numbers! What are your other mods?

Robd · 03-24-2012, 08:29 PM

i love my maggie super clean when installed right i like it most cause it looks like a old school motor

tjbusa · 03-24-2012, 10:26 PM

I went to pick it up in my tahoe, wow!!!! Its a big box, wrapped in waterproof plastic, strapped to a pallet. I had to remove the straps and lose the pallet to get it to fit in the back. Don't worry about the cardboard, I ripped into it to check for contents, I couldn't see anything else except more Edelbrock sealed cardboard boxes. The outer box was dent and poke free so I feel good with the shipping.

Question, will I need cooler spark plugs????

Big Daddy Kane · 03-24-2012, 11:00 PM

No, you won't need to run cooler plugs. If you look at the info label that comes with the kit (the emissions and belt info label that you are suppose to stick under the hood) it tells you to use the stock sparkplug gap as well.

Hendrix-Engineering · 03-25-2012, 10:02 AM

Quote:

Originally Posted by tjbusa

I went to pick it up in my tahoe, wow!!!! Its a big box, wrapped in waterproof plastic, strapped to a pallet. I had to remove the straps and lose the pallet to get it to fit in the back. Don't worry about the cardboard, I ripped into it to check for contents, I couldn't see anything else except more Edelbrock sealed cardboard boxes. The outer box was dent and poke free so I feel good with the shipping.

Question, will I need cooler spark plugs????

YES!!! you need to drop at least one heat range ,i would drop two if your over 525-550 rwhp

HufferSS · 03-25-2012, 10:59 AM

Quote:

Originally Posted by tjbusa

Attention to detail more than anything else.

It might look pretty...aka attention to detail...but it is clearly Third of the big three...and by FAR. Big three being a Maggie, Edelbrock or Whipple. I don't count Kenne Bell cause I hate em.

03-20-2012, 11:24 PM	#16
tjbusa Serious Sleeper Drives: 2010 CGM 2SS/RS M6 Join Date: Nov 2008 Location: Lexington,SC Posts: 3,129	Thanks, epstein, that was it __________________ ************************************* Drive-by Fact of Life: After Monday and Tuesday even the calendar reads... W T F *************************************

03-22-2012, 02:15 PM	#17
tjbusa Serious Sleeper Drives: 2010 CGM 2SS/RS M6 Join Date: Nov 2008 Location: Lexington,SC Posts: 3,129	Forgot about the JRE fuel system Upgrade, I will get that on order today along with the Rev Extreme catch can from Jannetty. __________________ ************************************* Drive-by Fact of Life: After Monday and Tuesday even the calendar reads... W T F *************************************

03-22-2012, 02:26 PM	#18
toesuf94 Drives: THR #11 E-force supercharged Join Date: Jul 2008 Location: Cedar Rapids, IA Posts: 4,746	I love mine! __________________ Cars and women are both going to give you problems...but you can pay somebody else to fix your car!

03-22-2012, 09:08 PM	#19
tjbusa Serious Sleeper Drives: 2010 CGM 2SS/RS M6 Join Date: Nov 2008 Location: Lexington,SC Posts: 3,129	Catch can is on backorder for 2 weeks. :( __________________ ************************************* Drive-by Fact of Life: After Monday and Tuesday even the calendar reads... W T F *************************************

03-24-2012, 08:29 PM	#24
Robd Robs SS Drives: 2011 camaro ss synergy Join Date: Jul 2011 Location: Calgary Posts: 354 View My Garage	maggie i love my maggie super clean when installed right i like it most cause it looks like a old school motor Attached Images __________________ [COLOR=lime]my kinda going green POWER 605 RWHP powered by maggie chrome tsv 2300 supercharger,ar long tube headers high flow cats b and b exhaust ,roto fab intake ,lingenfelter cam , upgraded sc reservoir ,Comp cams performance valve springs, Comp cams Titanium retainers,Heavy duty valve locks,MSD ignition wires, Kool Sox heat resistant heat sleeves , Larger fuel injectors, high flow fuel rails,American racing rims ,hurst short throw shifter,led footwell and grille lighting,pfadt suspension upgrades

03-20-2012, 09:54 PM	#15
epstein Account Suspended Drives: SS/RS Join Date: May 2010 Location: Transplanted from NYC..(ret. NYPD).Now in CT Posts: 904	roto fab for e force and a rev extreme catch can ...what did u need to know

03-22-2012, 09:23 PM	#20
ToolFan66 Drives: 2011 2SS 6.2L W/RS package Join Date: Jan 2011 Location: Colorado Posts: 3,008	Thanks for posting I was wondering what else would be needed for this install. I am getting a lot of work done around the house this spring and hope to do the same upgrade soon after..

03-23-2012, 11:47 AM	#22
ROCrMH Drives: synergy green 2ss/rs Join Date: Feb 2012 Location: PA Posts: 12 View My Garage	I Just had the E-Force Edelbrock Kit#1598 installed last week@ Grabiak Performance Center. Looks good under the hood like it came from the factory. 6lb of boost,dyno was 575rwhp and 564 rwtq, I'm really pleased with the install, supercharger doesn't whistle or wine and is loaded with power.

03-24-2012, 10:26 PM	#25
tjbusa Serious Sleeper Drives: 2010 CGM 2SS/RS M6 Join Date: Nov 2008 Location: Lexington,SC Posts: 3,129	I went to pick it up in my tahoe, wow!!!! Its a big box, wrapped in waterproof plastic, strapped to a pallet. I had to remove the straps and lose the pallet to get it to fit in the back. Don't worry about the cardboard, I ripped into it to check for contents, I couldn't see anything else except more Edelbrock sealed cardboard boxes. The outer box was dent and poke free so I feel good with the shipping. Question, will I need cooler spark plugs???? Attached Images __________________ ************************************* Drive-by Fact of Life: After Monday and Tuesday even the calendar reads... W T F *************************************

03-24-2012, 11:00 PM	#26
Big Daddy Kane Drives: Red 1SS Join Date: Oct 2010 Location: Bethel Park, PA Posts: 195	No, you won't need to run cooler plugs. If you look at the info label that comes with the kit (the emissions and belt info label that you are suppose to stick under the hood) it tells you to use the stock sparkplug gap as well. __________________ Kooks LT Headers/catback exhaust, E-force supercharger, JRE fuel line upgrade, JRE differential, 3.91 LPE gears, Roto-fab intake, JRE tune, DSS Carbon Fiber driveshaft, MGW shifter, Hotchkis chassis braces

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Edelbrock e-force supercharger $4500	stock00ss	Forced Induction	11	11-09-2011 04:40 PM
Edelbrock E Force Supercharger Issue	PJ droopy pants	Forced Induction - V8	27	01-10-2011 08:21 AM
Edelbrock E Force Supercharger w/BMR Springs & Sub Frame Connect Under $7000.00	Xplosive Performance	Forced Induction	1	01-05-2011 02:41 PM
Edelbrock E-Force Supercharger Kit w/Stainless Works Headers	Xplosive Performance	Forced Induction	0	12-20-2010 09:07 PM
Edelbrock E Force Supercharger Installed and Tuned!	PJ droopy pants	Forced Induction - V8	61	07-16-2010 12:48 PM