Dive planes (canards) for the 5th gen Camaro - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Skylane765 · 02-05-2018, 01:44 PM

We will have the dive planes (canards, but that's not the correct term)in stock for the 5th gen Camaro SS and Z/28 plus many other models. here is a look at the 6th gen models. NO drilling into the bumper or fender!!

cnrad · 02-05-2018, 02:07 PM

Ooh awesome! Looking forward to seeing how they will look. Definitely something I’ve been thinking of putting on down the road.

SSEssence · 02-05-2018, 03:05 PM

I've been looking for some dive planes, hope you offer em for the 14-15s!

xc_SS/RS · 02-05-2018, 03:19 PM

so with no drilling required, how do these mount? do you know how much these impact front end aero?

cnrad · 02-05-2018, 03:52 PM

Quote:

Originally Posted by xc_SS/RS

so with no drilling required, how do these mount? do you know how much these impact front end aero?

Since no drilling is required, I’d guess they’re being mounted with 3M double sided tape.

Edit: I was wrong, no 3M tape. From the OP: "they are mounted with a tab at the marker light and you drill a small hole into the driving light bezel"

Gunmetal Speedster · 02-05-2018, 04:57 PM

I've considered a set of these but never found a company that can pull it off right enough to convince me. Hope you nail it! These may be in my future. ETA on the wait?

hammdo · 02-05-2018, 06:12 PM

Some for the 5th gen ZL1 ;o)

Not in for looks but interested in how they function!

-Don

AG1LE · 02-05-2018, 06:31 PM

Curious to see how these turn out

Clarksroom · 02-05-2018, 06:54 PM

I would love to see a good set of these that look right on a 5th Gen. Like ^^^^ any time frame?

InFiD3ViL · 02-05-2018, 07:12 PM

Quote:

Originally Posted by cnrad

Since no drilling is required, I’d guess they’re being mounted with 3M double sided tape.

That's what I was thinking. Which would be a no-go for me.

I spend the majority of my driving time on highway >75 mph. I fear repeated wind stress would eventually tear those suckers right off.

Curious though if they even make them for the pre-refresh 5th gens. I could see them looking good on a 14/15, but I would like to see them on the early cars.

hammdo · 02-05-2018, 08:17 PM

I’m ok if we have to install them like the ZL1 1LE and use lock pins behind the bumper (small cuts to slide in the lock tabs)...

-Don

cnrad · 02-05-2018, 08:19 PM

Quote:

Originally Posted by InFiD3ViL

That's what I was thinking. Which would be a no-go for me.

I spend the majority of my driving time on highway >75 mph. I fear repeated wind stress would eventually tear those suckers right off.

Curious though if they even make them for the pre-refresh 5th gens. I could see them looking good on a 14/15, but I would like to see them on the early cars.

Yeah I feel ya. I guess we'll have to see what they say about how well they hold up in testing.

I've seen them on a few pre-refresh 5th gens and think they look good, but have to be paired with that track/race inspired theme.

Gunmetal Speedster · 02-05-2018, 09:12 PM

Quote:

Originally Posted by hammdo

I’m ok if we have to install them like the ZL1 1LE and use lock pins behind the bumper (small cuts to slide in the lock tabs)...

-Don

I dig the idea of it being set up like that.

Quote:

Originally Posted by cnrad

Yeah I feel ya. I guess we'll have to see what they say about how well they hold up in testing.

I've seen them on a few pre-refresh 5th gens and think they look good, but have to be paired with that track/race inspired theme.

That orange one gets me everytime I see it. Looks amazing

cnrad · 02-05-2018, 10:28 PM

Quote:

Originally Posted by Gunmetal Speedster

I dig the idea of it being set up like that.

That orange one gets me everytime I see it. Looks amazing

Yeah it's a sweet build. Don't mean to get too off-topic, but I'll just leave this here haha

02-05-2018, 01:44 PM	#1
Skylane765 Drives: ZL1-1LE, Z/28 Join Date: May 2012 Location: San Diego Posts: 3,262 View My Garage	Dive planes (canards) for the 5th gen Camaro We will have the dive planes (canards, but that's not the correct term)in stock for the 5th gen Camaro SS and Z/28 plus many other models. here is a look at the 6th gen models. NO drilling into the bumper or fender!! Attached Images Last edited by Skylane765; 02-07-2018 at 11:04 AM.

02-05-2018, 03:05 PM	#3
SSEssence Instagram: Sangstah Drives: 2019 Camaro 1LE Join Date: Sep 2016 Location: Buena Park, CA. Posts: 2,800 View My Garage	I've been looking for some dive planes, hope you offer em for the 14-15s! __________________ 2019 SS 1LE - "CaSSandra" 2014 SS - "AleSSandra - Sold" 94 Z28 - Sold Follow the build https://www.camaro6.com/forums/showthread.php?t=612717

02-05-2018, 03:19 PM	#4
xc_SS/RS Drives: 2010 Camaro SS/RS Join Date: Mar 2014 Location: somewhere in MD Posts: 4,884	so with no drilling required, how do these mount? do you know how much these impact front end aero? __________________ 2010 2SS/RS Z/28 intake, NW, FAST 102, speed engineering LT's, some exhaust, ATI -10% pulley, GM flex fuel injectors, DSX flex fuel sensor, MGW shifter, HP Tuners, some suspension work, stickers and a little weight loss. 12.63 @113.53

02-05-2018, 04:57 PM	#6
Gunmetal Speedster Drives: Savitar; The 500rwhp N/A Monster! Join Date: Aug 2016 Location: Middletown, Ohio Posts: 2,914 View My Garage	I've considered a set of these but never found a company that can pull it off right enough to convince me. Hope you nail it! These may be in my future. ETA on the wait? __________________ **SOLD504HP/433**TQ \| Night Fury cammed • Cold Air Inductions intake • Bo White ported TB • Speed Engineering 1 7/8 longtubes • NPP catback • QTP low profile cutouts • Powerbond 25% UDP • 3.73 gears • JRE scoop • ZL1 grille • R1 Concepts drilled/slotted rotors • built/tuned by Weapon X Motorsports Instagram \| YouTube \| Build Thread

02-05-2018, 06:12 PM	#7
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,693 View My Garage	Some for the 5th gen ZL1 ;o) Not in for looks but interested in how they function! -Don __________________ 747 RWHP 794 RWTQ "Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577

02-05-2018, 02:07 PM	#2
cnrad Drives: a wagon Join Date: Jul 2010 Location: ᴄᴀʟɪꜰᴏʀɴɪᴀ Posts: 1,199 View My Garage	Ooh awesome! Looking forward to seeing how they will look. Definitely something I’ve been thinking of putting on down the road.

02-05-2018, 06:31 PM	#8
AG1LE Drives: '14 1LE Join Date: Nov 2013 Location: NJ Posts: 2,435	Curious to see how these turn out

02-05-2018, 06:54 PM	#9
Clarksroom Drives: 2017 Camaro SS Barry_the_Camaro Join Date: Jul 2017 Location: Indianapolis Posts: 50	I would love to see a good set of these that look right on a 5th Gen. Like ^^^^ any time frame? __________________ 2017 Camaro SS A8 Barry_The_Camaro Pray Performance Built 416, Pray Performance ported stock heads, 2" Stainless Works headers, BTR Trinity Intake CNC and ported by Pray Performance, D1X Procharger with Stage 2 Intercooler and Red Race BV, E85, Twin nozzle Meth Injection, Circle D Convertor, Kel-Trac spec'ed Viking rear shocks, Multiple BMR rear suspension parts, 1-piece DSS driveshaft, Stock Trans, Stock Diff/Axles