Rohana RF2 Wheels - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

MrWray · 02-06-2016, 01:47 AM

Good day everyone, i have decided to go with the Rohana RF2 wheels in matte black, 20x9 and 20x11 on my 2016 ********* 2SS. I talked to a rep with Rohana and told him what car i have. The standard setup show the 20x9 with a standard face wheel "almost no concave" and the 20x11 with medium face concave. I told the rep that i was wanting the deep concave for the rear, and he told me that the deep concave wheel would possibly stick out past the fender well about an inch or less. Does anyone know if the deep concave will fit fine, or will it be too much?

Sent from my SAMSUNG-SM-G890A using Tapatalk

mantarey · 02-06-2016, 08:04 AM

I believe that if you go with a 20x11 in the rear, as long as you the correct back space the front concave look of the wheel will be as deep as allowed for that size. I think the correct back space is 43 on a 20x11 if you convert that to inches I believe it comes in at about 6" back space so the front of the wheel will have about a 4-5" concave look to it. I myself am going throu a similar issue but I want a 12" wide wheel on the rear of my car, hope this helps a little

02-06-2016, 01:47 AM	#1
MrWray SYBIL Drives: 2013 2SS/RS, silver ice metallic Join Date: Oct 2012 Location: Oklahoma Posts: 1,444	Rohana RF2 Wheels Good day everyone, i have decided to go with the Rohana RF2 wheels in matte black, 20x9 and 20x11 on my 2016 ********* 2SS. I talked to a rep with Rohana and told him what car i have. The standard setup show the 20x9 with a standard face wheel "almost no concave" and the 20x11 with medium face concave. I told the rep that i was wanting the deep concave for the rear, and he told me that the deep concave wheel would possibly stick out past the fender well about an inch or less. Does anyone know if the deep concave will fit fine, or will it be too much? Sent from my SAMSUNG-SM-G890A using Tapatalk __________________

02-06-2016, 08:04 AM	#2
mantarey Drives: 77corvette/2011blkcamaro Join Date: Oct 2009 Location: Deer Park Long Island Posts: 80	I believe that if you go with a 20x11 in the rear, as long as you the correct back space the front concave look of the wheel will be as deep as allowed for that size. I think the correct back space is 43 on a 20x11 if you convert that to inches I believe it comes in at about 6" back space so the front of the wheel will have about a 4-5" concave look to it. I myself am going throu a similar issue but I want a 12" wide wheel on the rear of my car, hope this helps a little