Stock OFFSET - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Rob@WretchedMS · 07-23-2009, 06:29 PM

8" rims should be a 48mm offset, as the GTO and G8 are 48mm

Mr Twisty · 07-23-2009, 06:34 PM

Quote:

Originally Posted by Matster

No sure whether this is what you were looking for but I have been getting some quotes on rims and was given this information.....

The correct sizes to use with you stock tires would be 20x8.5 front w/ +35offset and a 2.5"lip.
the rears would be 20x10 w/ +40offset and a 3" lip.

Your number don't match the service manual page, possibly because it's SS and service page is for LT? We need as much info on all the cars tho if we're gonna have accurate offsets for any width and any car, front and rear. Thanks.

Quote:

Originally Posted by Rob@WretchedMS

8" rims should be a 48mm offset, as the GTO and G8 are 48mm

Rob, so the GTO/G8 wheels are the same as the Camaro? We don't even have that yet, and we should...Thanks

WySS · 07-23-2009, 06:40 PM

Here is a pic of the markings on a 21" wheel. Would the offset be a 43mm?

Mr Twisty · 07-23-2009, 06:46 PM

Quote:

Originally Posted by WySS

Here is a pic of the markings on a 21" wheel. Would the offset be a 43mm?

Yeah buddy! You ROCK dude!

Now we need a photo of a car with the 21's on it to see fender clearance once lowered hint[cough]hint Rob@wretched

PQ · 07-23-2009, 06:58 PM

Quote:

Originally Posted by WySS

Here is a pic of the markings on a 21" wheel. Would the offset be a 43mm?

Damn. The 20s didn't have that. Wonder why? I'm on my way home here in 5 minutes and will post pics of the numbers in about an hour.

Gotta stop and get some chlorine shock and algecide.

Sir Nuke · 07-23-2009, 06:59 PM

Quote:

Originally Posted by WySS

Here is a pic of the markings on a 21" wheel. Would the offset be a 43mm?

what WE need is a picture like that for EVERY car, LS, 1LT, 2LT, 1SS, 2SS, fronts and rears, THEN we will have all the inforamtion we should. That is why I started teh thread to begin with. Wyss, thank you VERY much for your contribution. but how about a picture of the front wheel? :{D

Rob@WretchedMS · 07-23-2009, 07:03 PM

Quote:

Originally Posted by MisterCamaro69

Rob, so the GTO/G8 wheels are the same as the Camaro? We don't even have that yet, and we should...Thanks

they are the same bolt pattern, 5x120 as far as i know
and it would make sense the they would have the same offset on the 8" rims too.

Not sure what the offsets are on anything that isn't 8" rims, but it's a start.

PQ · 07-23-2009, 08:25 PM

35mm on the 20" fronts and 40mm on the 20" rears.

Got a good picture of each but left the cord for the camera at work.

I'm all ate up. But those are the offsets.

khislop007 · 07-23-2009, 08:45 PM

Quote:

Originally Posted by WySS

Here is a pic of the markings on a 21" wheel. Would the offset be a 43mm?

ding ding ding ding...................we have a winner!

Quote:

Originally Posted by irpq11

35mm on the 20" fronts and 40mm on the 20" rears.

Got a good picture of each but left the cord for the camera at work.

I'm all ate up. But those are the offsets.

Sweet! thanks irpq11

PQ · 07-23-2009, 09:21 PM

Ok fellas. Got the best ones I could using a hid flashlight and my iPhone. Here are pics of the numbers from the 20" MS wheels in my garage. If I read it right, it's what you are looking for. If not

Rear

Name: IMG_0605.JPG
Views: 1212
Size: 204.5 KB

Front

Name: IMG_0610.JPG
Views: 1184
Size: 198.6 KB

PQ · 07-23-2009, 09:23 PM

I will put high res up tomorrow at the office if you like.

Mr Twisty · 07-23-2009, 09:39 PM

Quote:

Originally Posted by irpq11

I will put high res up tomorrow at the office if you like.

PQ, those are fine! Looks like 35mm and 40mm, and those are the standard wheels on a 2SS, maybe milk will be willing to update the wiki once all wheels are confirmed... Thanks for your help buddy.

SS 20x8 = 35mm offset (front)
SS 20x9 = 40mm offset (rear)
SS optional wheels 21x9.5 = 43mm offset (front and rear?)
LT? 18x8 = 48mm offset
LT? 19x8 = 48mm offset

wiki shows 18x7.5 no data (unless these are the 18x8?)

PQ · 07-23-2009, 10:43 PM

I'm guessing 38mm. I'll checkmom my car tomorrow. Maybe I can get to the markings without having to take them off.

Mr Twisty · 07-23-2009, 11:02 PM

Quote:

Originally Posted by WySS

Here is a pic of the markings on a 21" wheel. Would the offset be a 43mm?

Was that etched on the inner lip of the rim?

Quote:

Originally Posted by irpq11

I'm guessing 38mm. I'll checkmom my car tomorrow. Maybe I can get to the markings without having to take them off.

Those are the 21's on your car aren't they?

07-23-2009, 08:25 PM	#36
PQ Booooosted. Drives: 2010 Supercharged SS Join Date: Apr 2008 Location: Mobile, AL Posts: 36,716 View My Garage	35mm on the 20" fronts and 40mm on the 20" rears. Got a good picture of each but left the cord for the camera at work. I'm all ate up. But those are the offsets. __________________

07-23-2009, 09:21 PM	#38
PQ Booooosted. Drives: 2010 Supercharged SS Join Date: Apr 2008 Location: Mobile, AL Posts: 36,716 View My Garage	Ok fellas. Got the best ones I could using a hid flashlight and my iPhone. Here are pics of the numbers from the 20" MS wheels in my garage. If I read it right, it's what you are looking for. If not Rear Front __________________

07-23-2009, 09:23 PM	#39
PQ Booooosted. Drives: 2010 Supercharged SS Join Date: Apr 2008 Location: Mobile, AL Posts: 36,716 View My Garage	I will put high res up tomorrow at the office if you like. __________________

07-23-2009, 10:43 PM	#41
PQ Booooosted. Drives: 2010 Supercharged SS Join Date: Apr 2008 Location: Mobile, AL Posts: 36,716 View My Garage	I'm guessing 38mm. I'll checkmom my car tomorrow. Maybe I can get to the markings without having to take them off. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3rd Gen Camaro Street Stock build thread (dialup beware)	zlathim	3rd Generation Camaros	9	12-06-2018 10:30 AM
Camaro L99 American Racing Headers (Catted) system with stock exhaust = +42rwhp	pharmd	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	43	07-25-2009 10:01 AM
Check your Order here	bvonscott	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	665	06-29-2009 01:00 PM
Stock Offset????	BumbleBeeSS2009	Wheels and Tires Talk Sponsored by The Tire Rack	1	06-14-2009 09:40 PM
Wheel offset of stock wheels?	jc211	Wheels and Tires Talk Sponsored by The Tire Rack	0	03-27-2009 01:54 PM

07-23-2009, 06:29 PM	#29
Rob@WretchedMS Drives: His Wife Crazy Join Date: Jan 2008 Location: Silas Deane Auto,CT Name: Rob Anderson Posts: 1,789	8" rims should be a 48mm offset, as the GTO and G8 are 48mm

07-23-2009, 06:40 PM	#31
WySS Drives: 2010 Camaro 2SS RS M6 CGM A9125214 Join Date: Jun 2009 Location: So Cal Posts: 155	Here is a pic of the markings on a 21" wheel. Would the offset be a 43mm?