Which Axle Back Exhaust should I go with? - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Ventmaster · 02-23-2011, 04:04 PM

The Borla axle back gets my vote. And I got the "touring" not the "sport" model. (the Camaro is not a "Fast and Furious" car IMO). They're as quiet as the stock cans at idle and low revs, but get nice and angry when you put your foot in it! In between they've got authority, but are refined-(don't sound like a hollow can).
It's an easy install and they each weigh 10lbs vs the stock can's 25lbs each. I found mine new online for $600.

jagan323 · 02-23-2011, 04:34 PM

I don't even have an axleback setup, but MRT makes me wish I did.

cnrad · 02-23-2011, 06:02 PM

Quote:

Originally Posted by jagan323

I don't even have an axleback setup, but MRT makes me wish I did.

Birm · 02-23-2011, 06:26 PM

Quote:

Originally Posted by rtcat600man

I installed my own MRT 2.0. Then took it to the people who built it and had them weld it on.

I have had many members on this and other Forums say this is one of the best sounding systems they have heard and by far the best sounding MRT 2.0 system.
Take a listen for yourself.

Listen to these thru some headphones or ear buds.

Here is a few videos for you:

This one is from inside my Camaro on the way to the dragstrip.

This one is from inside my Camaro while at the dragstrip. Sorry about the Camera tipping.

This one is one that SCRMNG filmed for me while we were at the dragstrip. the last 30 seconds is me on a single pass.

This last clip is one that danrc28 put together when visiting me to her a MRT 2.0 system. He went from Toronto to Florida and back stopping along the way picking up sound bytes. The video starts off with outside rev's, then an on ramp full throttle run, then an acceleration run from inside while talking about drone. Tape finishes with me passing the camera on the highway doing 3rd gear runs. Which has not been recorded by anyone else using the MRT (or at least I am not aware of anyone with this type of recording.) (rcat's)

I did as suggested and used some bose noise iso headphones....holy sh** that sounds amazing!! Awesome video man really captures what this exhaust is capable of..

OrangeFury · 02-27-2011, 06:38 AM

Quote:

Originally Posted by =Stephens=

Flowmaster American Thunder.

Quote:

Originally Posted by Camaro Freak

Flowmaster American Thunder rocks!!! And it comes with a 10 year warranty!!

IROCanSS · 02-27-2011, 06:42 AM

The one YOU like the best??? Theres a thought.

rtcat600man · 02-27-2011, 07:39 AM

Quote:

Originally Posted by Birm

I did as suggested and used some bose noise iso headphones....holy sh** that sounds amazing!! Awesome video man really captures what this exhaust is capable of..

Thank - you. When people hear this in person they are amazed how GREAT this sounds.

scrming · 02-27-2011, 07:41 AM

Quote:

Originally Posted by jrhaus76

The one YOU like the best??? Theres a thought.

Exactly... like some one posted the other day, "which ketchup tastes the best?" LOL

Sneeks20 · 02-27-2011, 11:53 AM

Quote:

Originally Posted by Birm

I did as suggested and used some bose noise iso headphones....holy sh** that sounds amazing!! Awesome video man really captures what this exhaust is capable of..

Check out MRT V1

a red maro · 02-27-2011, 10:24 PM

yeah i agree with scrming witch ever exhaust you prefer. honestly when i purchased my Camaro the exhaust i always pictured for it was a flowmaster, i purchased it and love it. I'm happy with it and i could really not give a crap what other people opinions are so it all good lol

2010CamaroRS · 02-28-2011, 09:21 AM

Intake - BBK
Exhaust - Flowmaster American Thunder

you'll be smiling ear to ear with that setup...trust me...ive got it and my face hurts

USMCSSGT-RET · 02-28-2011, 08:10 PM

I'm running the Injen full length CAI with the DynoMax axle back and it sounds great and is definitely more snappy when you hit the throttle. I recommend it, but if you can, listen to them all on a car and see what you like the best.

Trevorw24 · 02-28-2011, 09:17 PM

Here's my MRT v2 w/o resonators

02-23-2011, 04:34 PM	#16
jagan323 I have no life Drives: 06' Subaru STI, ex-Camaro V6 LLT Join Date: Apr 2010 Location: Top Gear Test Track Posts: 3,189	I don't even have an axleback setup, but MRT makes me wish I did. __________________ List of Camaro DIY The Blog

02-27-2011, 10:24 PM	#24
a red maro Drives: Victory Red 2lt RS V6 auto Join Date: Mar 2010 Location: Alice Tx. Posts: 156	yeah i agree with scrming witch ever exhaust you prefer. honestly when i purchased my Camaro the exhaust i always pictured for it was a flowmaster, i purchased it and love it. I'm happy with it and i could really not give a crap what other people opinions are so it all good lol __________________ so dirty but yet so clean

02-28-2011, 09:21 AM	#25
2010CamaroRS Driver of the Blue Demon Drives: '15 Jeep Grand Cherokee Limited Join Date: Jan 2010 Location: Westfield, MA Posts: 2,550 View My Garage	Intake - BBK Exhaust - Flowmaster American Thunder you'll be smiling ear to ear with that setup...trust me...ive got it and my face hurts __________________ New England Camaro 5 The Few, The Proud, The Hyper Blue Metallics DT shorties.BBK Intake.FlowMaster AT.Eibach 1'' drop.Hurst Short Throw (44% reduction).Unrestricted Motorsports Gen 1 Style Rear Spoiler.Custom Aqua Blue Metallic Interior Panels.RS Embroidered Head Rests.Interior LED by Oracle.Illuminated Bowtie by Oracle.Footwell LED by Oracle.Grille LED by Oracle.Functional Headliner Console Toggle Switches for LED Lighting.Aqua Blue Engine Cover.RotoFab Radiator Cover.Aqua Blue Fuse Box Cover from RPI Designs.Much More

02-28-2011, 08:10 PM	#26
USMCSSGT-RET Drives: '14 SIM 2LT/RS Vert Join Date: Aug 2010 Location: Concord, NC Posts: 1,412	I'm running the Injen full length CAI with the DynoMax axle back and it sounds great and is definitely more snappy when you hit the throttle. I recommend it, but if you can, listen to them all on a car and see what you like the best. __________________

02-28-2011, 09:17 PM	#27
Trevorw24 Black Ma6ic Drives: 2011 Camaro LS M6 Join Date: Dec 2010 Location: Los Angeles, CA Posts: 1,471	Here's my MRT v2 w/o resonators __________________ DT Headers l MRT v2 l Injen SRI l Hurst STS l Resonators Delete l Lowered 1.25'' l 35% Tint l Black Bowties l Tinted Tail Lights l AAC lighting l Debadged Last edited by Trevorw24; 03-02-2011 at 07:07 PM.

02-23-2011, 04:04 PM	#15
Ventmaster Drives: 2017 1SS 6spd Join Date: Jan 2011 Location: Utah Posts: 2,869	The Borla axle back gets my vote. And I got the "touring" not the "sport" model. (the Camaro is not a "Fast and Furious" car IMO). They're as quiet as the stock cans at idle and low revs, but get nice and angry when you put your foot in it! In between they've got authority, but are refined-(don't sound like a hollow can). It's an easy install and they each weigh 10lbs vs the stock can's 25lbs each. I found mine new online for $600.

02-27-2011, 06:42 AM	#20
IROCanSS Account Suspended Drives: 89 IROC 350 Join Date: Mar 2009 Location: Back roads, southern Ohio Posts: 12,504 View My Garage	The one YOU like the best??? Theres a thought.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS Axle back Borla S-Type Exhaust	automatic1221	V8 - Engine, Exhaust, Bolt-Ons, Tuning Equipment	17	12-30-2010 11:47 AM
FS Axle back Borla S-Type Exhaust	automatic1221	Wheels / Tires	1	12-07-2010 06:39 PM
axle back exhaust	mbspeed	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	0	07-24-2010 01:26 AM
Borla Axle back s type exhaust	camaroMSUfan	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	9	01-19-2010 11:09 PM
Question About Cat Back & Axle Back Exhaust Systems	SamSS	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	30	01-03-2010 01:42 PM