Front rotor ring replacement - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

revo1059 · 08-23-2019, 03:27 PM

Have micro cracks in my front rotors. I assume just the ring can be replaced. Stock the best cost effective option? Anybody have the P/Ns for them?

hammdo · 08-23-2019, 04:17 PM

0 ring replacements — rotors are a balanced set — only option as of now is new rotors...

~$285 each on amazon...

-Don

revo1059 · 08-29-2019, 01:34 PM

Crap. Ok. OEM the best bang for the buck?

Russell James · 09-04-2019, 02:26 PM

Sometimes pad material can build up and look like cracks. Unless the rotors were cooked to red glowing hot, or have beauty holes in them. I've seen plenty of cracks around the holed rotors, but the solids unless really overcooked shouldn't be cracked. Anyone put on ceramic pads? Those can build up layers that look like cracks, but just pad material smeared on.

olblue75 · 09-05-2019, 07:24 AM

I'm looking for 2pc rotor hardware my self already have the hats just hardware and figure out what rings I wanna use.

FASTFATBOY · 09-15-2019, 08:50 PM

Coleman rotors will build you a set

RyangAsh · 09-17-2019, 12:20 PM

Quote:

Originally Posted by FASTFATBOY

Coleman rotors will build you a set

Is this the same fastfatboy from LS1tech? waz up?

08-23-2019, 03:27 PM	#1
revo1059 Drives: Black 2012 ZL1 Join Date: Mar 2013 Location: Buffalo Grove Posts: 433	Front rotor ring replacement Have micro cracks in my front rotors. I assume just the ring can be replaced. Stock the best cost effective option? Anybody have the P/Ns for them?

08-23-2019, 04:17 PM	#2
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,694 View My Garage	0 ring replacements — rotors are a balanced set — only option as of now is new rotors... ~$285 each on amazon... -Don __________________ 747 RWHP 794 RWTQ "Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577

09-05-2019, 07:24 AM	#5
olblue75 Drives: 2010 2SS/RS Join Date: Dec 2009 Location: Clarksville Tennesse. Posts: 6,064	I'm looking for 2pc rotor hardware my self already have the hats just hardware and figure out what rings I wanna use. __________________ Orange Krush II 1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components.

08-29-2019, 01:34 PM	#3
revo1059 Drives: Black 2012 ZL1 Join Date: Mar 2013 Location: Buffalo Grove Posts: 433	Crap. Ok. OEM the best bang for the buck?

09-04-2019, 02:26 PM	#4
Russell James Drives: '15 SS 1LE, '69 Z28 drag car Join Date: Dec 2009 Location: Mich Posts: 4,482	Sometimes pad material can build up and look like cracks. Unless the rotors were cooked to red glowing hot, or have beauty holes in them. I've seen plenty of cracks around the holed rotors, but the solids unless really overcooked shouldn't be cracked. Anyone put on ceramic pads? Those can build up layers that look like cracks, but just pad material smeared on.

09-15-2019, 08:50 PM	#6
FASTFATBOY Drives: 2013 ZL1 Join Date: Nov 2018 Location: Mobile Al Posts: 302	Coleman rotors will build you a set