Official APEX Wheels Showroom Gallery

[APEXRaceParts]

Some nice photos of our customer Greg's mean looking 6th gen SS on SM-10 wheels in Satin Black finish.

APEX Wheel Fitment Specs:

• Front/Rear:19x10.5" ET22 square with 305/30-19 Michelin PS4S tires
• Additional fitment notes: No spacers (ground down front suspension, non mag-ride), -1.5* camber front and rear

[APEXRaceParts]

Camaro ZL1 1LE on 18" Anthracite SM-10s

APEX Wheel Fitment Specs:

• Front/Rear: 18x11" ET35 with 315/680-18 Pirelli DH Slicks
• Alignment: -3.5 degrees camber in front and -2.5 in back
• 26mm front spacer with extended studs

[APEXRaceParts]

Tyler Clark's "Shocker Camaro"

APEX Wheel Fitment Specs:

• Front/Rear: 19x11" ET35 APEX SM-10 in Satin Black with 305/30-19 Goodyear Eagle 3R tires
• Additional mods: APEX 26mm spacer in front with ARP extended studs
• Alignment: -2.3 degrees camber in front and -1.5 in back

[APEXRaceParts]

Marks Red Hot Camaro SS looking gorgeous one a square set of APEX SM-10 wheels in Anthracite finish.

APEX Wheel Fitment Specs:

• Front/Rear: 19x11" ET35 with 305/30-19 Goodyear Eagle SC3R Tires
• Additional mods: 26mm front spacer with ARP extended studs

Photography: @ariesphoto7

[APEXRaceParts]

Such a good color on this SS 1LE and a great fitment with out SM-10 wheel in Anthracite finish.

APEX Wheel Fitment Specs:

• Front: 19x10" ET20 with 285/35-19 t
• Rear: 19x11" ET35 with 305/30-19
• Tires: Goodyear Eagle F1 super car 3R

Owner's Instagram: @sinister_camaro6

[1JEWLDSSRS]

Daaannngggg that looks sharp!!

[KevinHoward8509]

i have a 2014 1LE thats dropped around 1.5 inches

I am looking for the best spec to get the widest tire out back possible. I wanna go down to an 18 inch wheel i was quoted a 18X10.5 with a 35MM off set. Is this the best option? i am hoping to go with a 325 tire.

Then also wondering what the best setup to run up front i was quoted a 18X9.5 22MM off set is this setup going to be the best for me?

i could also be talked into the EC 7 though i know i will need the rings for these.

I would also prefer to run 18's out back and 19's up front.

[APEXRaceParts]

Originally Posted by KevinHoward8509

i have a 2014 1LE thats dropped around 1.5 inches

I am looking for the best spec to get the widest tire out back possible. I wanna go down to an 18 inch wheel i was quoted a 18X10.5 with a 35MM off set. Is this the best option? i am hoping to go with a 325 tire.

Then also wondering what the best setup to run up front i was quoted a 18X9.5 22MM off set is this setup going to be the best for me?

i could also be talked into the EC 7 though i know i will need the rings for these.

I would also prefer to run 18's out back and 19's up front.

Hi, a 10.5" wide wheel is too narrow for a 325 width tire. It technically "fits", but you're wasting a lot of the tread by pinching it on there and it ends up performing like a 295 or 305 tire. If you want to run a 325/30-19 out back, I suggest our 19x11" ET35 or 43 (depending on design) at minimum. A 19x12" ET41 would be ideal for the best tire performance but will require a little negative camber out back to prevent tire poke with those 325s. Something like -1.5* would be perfect.

Up front an 18x9.5" ET22 can work well with a 275/40-18 tire. You could run this particular combo I mentioned in the SM-10, ARC-8, or EC-7 designs.

[APEXRaceParts]

With our first batch of 18" Sprint Forged wheels shipping out in the next few weeks, the time has come to add these beauties to our Showroom Gallery thread. We hope to see a lot more of these in the near future!

[SlowLS1]

EDIT: Sent you a PM on this.


Good Morning!

I have a 2010 SS and extremely interested in your ARC-8 wheels.

I am wanting to go with 19x10 ET20 up front wrapped in 285's and 19x11 ET43 in the rear on a 305.

My concern is I plan to do Air Lift suspension and not sure how if this combo would play nice together at lower ride heights.

Any advice?

Thanks!

Brian

[APEXRaceParts]

Just a few days left to save on the 19" Sprint Wheels. Join now to secure a set of VS-5RS or EC-7RS wheels for your Camaro!

https://www.gangup.com/apex/19-forge...s-q1-2022.html

Check out this beautiful ZL1 1LE sporting VS-5RS in 19x11" ET9 // 19x12" ET41

[APEXRaceParts]

Final hours to save! This will be the only time you'll be able to get these wheels at this price, don't regret waiting later on. In addition, so far everyone is getting their first choice and everything is on schedule despite all the madness in the world around us.

https://www.gangup.com/apex/19-forge...s-q1-2022.html

[APEXRaceParts]

Here's some more shots of our 19" VS-5RS ZL1 1LE like fitment. This is the widest staggered fitment available that still works as a no-nonsense direct fit for all ZL1 cars.

Fitment Specs:

• APEX Wheels VS-5RS in Brushed Clear
• F: 19x11" ET9 with 305/30-19 Michelin PS4S
• R: 19x12" ET41 with 325/30-19 Michelin PS4S

[APEXRaceParts]

The perfect street fitment!


Fitment Specs:

• F:19x10" ET20 w/ 285/35-18 RE71R tires
• R: 19x11" ET43 ARC-8305/30-18 RE71R tires